Dumpster Diving With a Borrowed Truck + Afternoon Processing Scrap!

What an adventurous day dumpster diving for scrap! We started out helping my buddy prepare his stash for delivery, then went out to try and fill the truck as many times as possible before the yard closed. We did pretty darn good! After adventuring we spend a solid say in the shop processing scrap and maximizing on what we could make from the remaining treasures. Overall a pretty full scrap day!
Wire stripper I use: amzn.to/3sirg18
The motorized stripper: amzn.to/3y0JMuQ
The wire cutters I like: amzn.to/2T6j3OW
The grips I recommend: amzn.to/2QCJmYl
The melting furnace: amzn.to/3EGxT2q
(If you make a purchase on amazon through the links above, a small amount of what amazon makes on the sale is shared with me. It's a great way to help support my channel, at no additional cost to you. Even if you buy something other than my tool recommendations!)
Please like/share this video if you enjoyed it, and subscribe to thubprint!
/ @thubprint
I love mail! You can send me some here if you like:
Thubprint
PO BOX 99900 RF 764 740
RPO WESTBROOK
CALGARY AB
T3C 1B6
/ thubprint
/ thubprint

[@livvyweimar7362]

Glad to see you mentoring a fellow scrapper.

[@joshmallon]

The enthusiasm your buddy has is quite the spectacle. Mega-good haul of scrap.

[@hotdogwhitonions5785]

Man i like that you are nice 😊😊😊

[@leftwich2274]

The cones in front and behind the truck is fucking hilarious. No way he was serious right. Lmao

[@82gamerprincess31]

I like Chris. He is a good apprentice. Asks questions, dives in head first, and still has enthusiasm you use lose after years of the drudge lol. That attitude will get you far in life.

[@JakeMcMac]

Man y’all fought for every pound of that and earned it. Good job, boys!

[@itayedry1234]

The lock you took off the aluminum door is a mortise cylinder, they are normally solid brass

[@tommymadden9746]

The new guy is quite ambitious. There is no scrap that can't be conquered.

[@thubprint]

It’s true! I was uncertain a few times but he’s just looking for ways to make it happen!

[@goldhunter9641]

Those 4 lawn chairs towards the end of the video in the alley way were nice looking but Super " DRY ROTTED ”

[@thatcanada]

Great to see you took my advice to use the stripmeister to strip romex - now if you would only stop throwing zinc-cast back... ;)

[@joshp6061]

Nice job on the aluminum and lumix/Romex. I love Chris’s enthusiasm for learning how to scrap (and swinging the negotiator)

[@AyRCee]

He Should get into concrete recycling 😂

[@jacktheripper6610]

Hey thub big props for informing the viewers on the the ac unit with refrigerant in it. I’m an hvac tech/pipefitter and most of my scrap is from ac coils. You’ll need a recovery machine, recovery cylinder, piercing valves, a set of manifold gauges and your epa license. With all that you can recover refrigerant from any type of equipment. And there’s a fee for exchanging cylinders once full and youll need a few cylinders so you don’t mix refrigerants. It ain’t cheap… but it’s worth it. If at all possible make friends with an hvac tech I’m sure he wouldn’t mind helping you out for a few bucks once you have a decent pile of them!! Keep on scrapping!!

[@thubprint]

It does seem like a lot when you list it all off like that! I think a partnership is the right way for someone like me, although there’s definitely a business opportunity for hauling away old refrigerators for people if you had the right setup

[@johncannon6572]

Hey I have one of those machines,for recovering Freon don't know how to use it.

[@randyseidell1665]

I like your friends motivation

[@richardwarnock2789]

Sweet runs for sure!!😊

[@madlinerose5038]

Chris is so fortunate to have you share your "hands on knowledge". Does he use a magnet and a file to test metals?

[@SmokyNiteSky]

Magnet, yes, I got to get a metal file.

[@its_marc]

Perfect timing, was just looking for something to watch :-)

[@mattmattmatt2683]

Just had some edibles and grilling some steaks and bbq chicken. Waiting on brats.

[@adamdaley8090]

Just as I was sitting down to eat, my Friday night entertainment drops. Perfect. Have a great weekend Thub!

[@johncannon6572]

As a life time scrapper I am glad to see ur friend so willing to scrap with you so much I can say , Glad u guys not on my route. Smile".

[@cocopufer5667]

I feel like the universe was telling you something - the go cart, then the motorcycle, maybe you can find a cool atv or something to go have fun zooming around somewhere

[@madlinerose5038]

Thank you for addressing the hazardous waste.

[@johnafagerquist8235]

I enjoy a good movie, on occasion, and stripping copper wire, no matter the gauge, is a nice way to get paid to watch it. It totally freaks me out that you don't strip your 12 gauge. It's so fast and easy. I strip all copper wire. Remember, I do it while enjoying a movie, which is something I do even if I'm not processing scrap. I have stripping machine.

[@ryanphillips1388]

You guys need to bring a reciprocating saw along

[@thubprint]

I do own a cordless one but I just had the simple tool bag along this time. Shoulda been more prepared!

[@b0rd3n]

The ABSOLUTE BEST to cut aluminium door frames - or just aluminium in general - is a skillsaw with a decent but used wood blade. Hold the guard up, safety glasses and a bit of a grip on it and you are done in 2 minutes! I used to work at a fab shop where we produced brand new citern tankers out of aluminium.. whenever we have a bad or unaesthetic weld, we would rip it in seconds with one pass of a skillsaw. it was a required piece of tooling for any welders on day one. Shop would provide quality, balanced blades tho but that just made the cuts thinner and more precise for a subsequent weld bead.

[@thubprint]

I’ve read that some folks reverse the blade when using for aluminium, not sure what that would help. Not something your shop cared to try?

[@b0rd3n]

@@thubprint i must say i've also heard that but i don't believe i found a need to try since aluminium is so soft and not the gummy type like brass per example. Either ways, i believe, if you ain't shy about presenting the spinning carbides, will result in a much faster and less consummable dense way of cutting the type of scrap like door frames etc. Have you personally had an occasion to use either methods on aluminium? It's scary at first and goes againts all principles it seems but mzn does it do a great and fast work of sitting/gouging/channeling into alu! Take care, enjoy yourself!

[@b0rd3n]

@@thubprint oh, and you need to show us some of them GIANTS rabbits i used to always see in and around Calgary! Man i was scared to have my window rolled down at some point! I was working for Clean Harbors back then, as a surveyor.

[@thubprint]

@@b0rd3n I actually did use that method when I had a truckload of aluminium cylinders I needed to cut in order for the scrapyard to take them kzbin.info/www/bejne/r5WzZZSbZrGbrM0 (should have just gone to a different scrapyard haha)

[@ruthbutler7984]

Interesting to see some one help & learn. Nice scrap runs!!

[@theodorelueker5057]

Scrappin with a friend=priceless

[@sandybruderer2084]

It’s so awesome to see a Canadian scraper 🇨🇦❤️

[@curtispederson9390]

Grat job😊

[@curtispederson9390]

Thats REALSCRAPPING

[@spangdeez498]

You guys are doing BIG BOY numbers lol.. if I get $50 buck I’m happy as hell- my thing is, I just don’t have places to put it all - so I can only save so much before I HAVE to take it in

[@katherineshief3081]

Thank you for your knowledge of scraping metal, enjoy your channel

[@emilyjust1189]

Good team for a good job... nice video...ty for sharing

[@lisabierstedt5045]

This partner is a real go getter

[@maxsaslt]

That was some amazing content, thanks Thub!

[@debow2550]

Diablo always gets the job done and they last 33% longer than any blades you put them up against

[@stevestevenson6816]

Cool... I've discovered that the sounds of scrap being sorted + Canadian accents is pretty decent asmr

[@thubprint]

😆👍

[@andreahobbs1861]

Nice video Thub!

[@afineliner740]

Thub, you are so generous with your time and knowledge. I think it's almost time for a new set of overalls 😁👍

[@rogereaston1188]

My Polish wife said that was a Russian typewriter. Very interesting. Lol

[@goldhunter9641]

It would be great if all scrap yards would consider brake rotors as #1 heavy prepared steel because of their thickness and tougher grade of steel like carbon steel they’re made out of

[@bigcountryscrapper6885]

Great video

[@williammeeks1283]

It would be really cool to have someone to scrap with but unfortunately I'm a loner when it comes to finding treasures. He seems like a really nice guy to hang out with. You 2 keep up the good work.

[@scrapitall200]

Another great video, Drake!

[@scraprodriguez]

Really enjoy this one! 🤙🏼

[@saloandrew77]

Dude, your cool, and you work hard, all good from the thumb of michigan, almost thumbprint🎉

[@VibinBryan]

cool!

[@b0rd3n]

i reuse/repurpose lithium ion cells from thoses vape pens... Very useful rechargeable and reliable power if you can build something out of them. I also repurpose the aluminium tubes into shotgun shells hulls, or some part of it anyways. makes for nice plinking ammo and fun with custom guages/bores!

[@b0rd3n]

oh, and i also make custom rings out of them vape pens tubes - just to give away randomly to whom the finger fits

[@anthonybeale1584]

Hello Drake, hi to you and your friend. Team work, got the job done.

[@joesask857]

your bud kicks ass

[@countryboy302]

Yo its awesome

[@philipphilip4793]

Junk Man has finally found his Robin. ❤

[@trench124]

Love the 1 hour vids just ashame about all the adverts 👍

[@stephensmith3708]

YEEEAAAH BOYEEEZZZ! TEAM WORK! Yo, Thubby, considering getting a larger pickup? Your buddy has it going oooon! Or have your ford/Mazda fixed and invest in a trailer.... Editing time. You both are awesome! Keep it with the situation and that's an order!!!!

[@mollynakamori]

Whew. I was getting worried!

[@thubprint]

Definitely published a few hours late this week 😆 haven’t missed one in years though, not about to start now

[@mollynakamori]

@@thubprint Well done, and a great video!

[@irenelacour3486]

Good seeing you again. I guess something happened to your truck I hope you get a new one or get yours fixed

[@KillerKolt44]

You are crazy dude 12 gauge is perfect stripping wire

[@thubprint]

For sure, it strips real easy and a bin full of sparkling bare bright is always a pleasure! I’ve just found that with all the comparisons and timed practice it seems 12ga is where the $/hr slumps below a typical minimum wage. It’s still a great way to make a bit of money while watching tv if that’s something a person is open to but I’d rather relax when it’s time to relax and get serious about making money when it’s time to make money.

[@adude7050]

Anytime you go to cut aluminum try spraying the blade with WD40. Give the blade a good soaking.

[@trasieinkersole491]

❤️💙

[@TheMachinePUA]

More Trashure!

[@howarddavis2193]

A guy i watch in the Chago area his yard will buy refergiation stuff and recover the Freon themselves

[@compdude551]

6:57 LOL

[@lukelegg9915]

3:12 looks like an Olympia Traveller Deluxe, not sure in Canada but in the US they're worth a few hundred buck, not super valuable as typewriters go but also not cheap

[@richavic4520]

What's up the tailgate? If the plastic crap inside the latch broke, take the handle off, detach the two rods, and scrap the handle. Squeeze the two rods together to open the gate. As for the ac unit. Isn't there an HVAC contractor who will collect the refrigerant? It can be reclaimed. I don't know if the contractor pays, but wouldn't it be kind of like scrapping?

[@thubprint]

That’s true, just pulling the rods would be better than not opening it at all

[@darrenshields1557]

Fix the tailgate and use old bed frame and shelving to make a headache rack

[@largeogres2415]

Thumb three things bigger trucks are good having extra hands is good but best of all having a working tailgate on the bigger truck is a must plus I weigh more than both of you but you

[@E-hab]

Your friend is giving me what I wanted you to do or what l would like to do.

[@thubprint]

I don’t understand, you want me to be more like him in some way?

[@E-hab]

@@thubprint Taking every bit and be more aggressive with the scrap 😂 Sorry but this is what makes me satisfied @thubprint Taking every bit and be more aggressive with the scrap 😂 Sorry but this is what makes me more satisfied 😅

[@paulcoenen7918]

I was going to ask why you guys didn't use the tailgate then I saw the Cheverly name on the back, that answered my question. 🤣

[@thomasbenton3633]

It made a good tipping point also. But his tailgate may never open easily again .

[@silverload3622]

Nothing cuts like a carbide heavy metal Diablo blade available at Home Depot

[@johncannon6572]

Never leave metal behind.

[@spangdeez498]

Trash day was literally yesterday in my neighborhood and my neighbor threw away his old aluminum poop chairs just like those.. and I told the gf we would waste til late to go get them and they were gone.. probably within TWO hours of being sat out in the curb - I couldn’t believe it! …. Somebody will make a few dollars, just wanted it to be me

[@lgphone5605]

I see you teaching boys to be men. Stand up guys don't miss any lessons

[@curtispederson9390]

Put the tail gate down?

[@sandymcgill1910]

scrap whisperer strikes again. lol

[@KenMagee]

Whispering on a garage door with a hammer. Sure. =)

[@StellanLarsson]

"vape" is stainless steel. Remove the plastic on the sides, push out the circuit board liquid and the battery.

[@E-hab]

True, that's what I do.

[@bestest7239]

awesome vape, makes me wonder how I lost my huge geekvape

[@slickback911]

Those door handles prob worth more than the whole pile of sCrap

[@wannabescrapper72]

I like your buddy's enthusiasm, but that dude needs a bigger hammer to match his swing.

[@timgalloway2566]

@thubprint Why do you cut the brass plug ends off of the appliance cords? If you don't save them to pluck the brass off, why don't you just keep them on for the extra weight?

[@thubprint]

My yard deducts pretty hard if the wire isn’t properly cleaned. I have saved them and experimented with ways to extract the brass quickly and it’s true, it is actually worth doing. I just hate doing it haha

[@timgalloway2566]

@@thubprint I asked my yard and they said I don't need to cut them off

[@thedwindles]

Does your yard take AC units as shred?

[@redmanbad8869]

Do tailgates not open in Canada?

[@johndferfr8450]

Is there any type of refrigerant or coolant you are allowed to vent out?

[@thubprint]

Not to my knowledge, no

[@anthonymariano-mp9ep]

I have a question how come u didn't drop the tailgate on the truck

[@hellebettinanielsen6913]

Team trash for cash 😉😁

[@rubendfernandez4747]

hello you need to buy a 7x16 trailer and you will make more money I have one and it really makes a very good difference greetings from ny

[@Kreacher1974]

What is the model of the makita air hammer

[@andrewcannon587]

Mmmmm, wires

[@Wannaridebikes]

The goalie pads could be sold. Still

[@aceace2625]

Why you say is not worth scrapping AC unit and picking up refrigerator?

[@myvicariouslife4012]

@0:50 Canada's Scrap Jesus

[@nickshelley3118]

Whats with the orange cones? LMMFAO

[@MsMaxno]

hi, why don't you want those wires that are not cleaned put them in a saucepan put them in the oven and burn them then pull out the pan open the lid and wash them from soot

[@johnhubbard6262]

Oh to be young again and lift things the hard way. Load those long heavy items with the tailgate down then lever them up from the back to raise the tailgate. You will be lifting only part of the weight at any given time instead of all of it.

[@E-hab]

I think the tailgate is not working

[@martinebangs6520]

Just found your channel, I noticed you're Canadian by the money colours. I am in Ontario, where are you at ...Take care...

[@thubprint]

Oh hi there, glad you found me! I’m out in Calgary. Big city by my standards but tiny compared to what’s around you haha!

[@martinebangs6520]

@@thubprint Not really, I am in northeastern Ontario, sm town in bumfuck nowhere, near North Bay, I stay away from places like Toronto, they are all crazy down there ...lol

[@thubprint]

@@martinebangs6520 I’ve heard that 😆 still want to visit Toronto someday but living there is probably not ever a priority for me lol

[@E-hab]

You guys have probably the most colorful money paper! Is it really made out of plastic?

[@thubprint]

@@E-hab yup! Printed plastic with a shiny holographic picture in a clear window. The only problem is when they crack in the extreme cold haha

[@AmaBossBeYourOwnBoss]

So many adds

[@sirdrinkwater6394]

Snowboard bindings are replaceable.

[@TPLeatherworks]

Are cones really necessary for 1 minute of loading? Lol

[@bellwethertrucking3650]

Those chairs are what we'd call, "roached out". Unless you have the skills to reupholster them.

[@digitalbowser]

Those pylons cracked me up

[@kerrysilver7565]

why didn`t you put the tail gate down, to load that big item,surely it would have been easier.

[@E-hab]

I think it's broken

[@cj1613]

drop tht tail gate my god...

[@madlinerose5038]

You both should have contact cards.

[@franciscavallone124]

JUST TAKE A SCREW DRIVER AND CROSS THE ENDS OF THE CAPASITOR.