My truck had a 165 on it when I bought it with this delete bowl on it. Filter head had a bolt snap off on the primer plunger. So put a new head on it. Little did I know I had to remove the check ball on the new housing. Lmao. Took it for a drive and it threw codes. Came back and saw a forum post about factory filter having a thing that pushes the ball up. Then I found this video to confirm. Glad to know I wasn’t crazy!
@FASSFuelSystems5 ай бұрын
Happy the video helped, and that you got that taken care of!
@FaTaLlYiLl5 ай бұрын
I’ve wasted a whole fucking day trying to prime my truck because I didn’t know there was a check ball that needed to be removed! 😩
@FASSFuelSystems5 ай бұрын
We completely understand where you're coming from.
@patricknbrooks112 жыл бұрын
If I have a full housing delete how would I go about priming my fass system? Thanks in advance I tried to prime it as normal but it does not engage
@FASSFuelSystems2 жыл бұрын
Hey Patrick, we really appreciate you reaching out about this and will be happy to help. Our service team will be able to get this diagnosed for you no worries, and if you don't mind calling them at 1-866-769-3747. We will be happy to get this taken care of!
@christianayala182828 күн бұрын
I’m new to my duramax and I hate having to replace the filter, if I do this delete what happens to the filter? Is there something else needed?
@FASSFuelSystems27 күн бұрын
Great question, and deleting the filter housing will eliminate the filter. Once deleted you shouldn't need anything else.
@christianayala182827 күн бұрын
@@FASSFuelSystems perfect this solves my problem!! Thank you soo much
@FASSFuelSystems26 күн бұрын
@@christianayala1828 you are very welcome!
@ricardorodriguez-se7tp2 жыл бұрын
WILL THIS WORK ON A 2006 TOPKICK WITH A DURAMAX
@FASSFuelSystems2 жыл бұрын
It sure will!
@codymarion14953 жыл бұрын
Yeah I just can't seem to understand how or why this is an "upgrade".
@FASSFuelSystems3 жыл бұрын
Totally understand where your coming from here sir. With the addition of the FASS there really isn't a need for the factory filter, and this will eliminate that for you. By doing this it will save money on your filters as well eliminating the need to replace your factory fuel filter every 5-8k miles. If you have any other questions, or need anything at all you are always welcome to reach out to us via our tech line as well. 1-866-769-3747. Thank you sir!
@Duramax_Yamahaguy3 жыл бұрын
Just did this on my lmm and it’s leaking from the fuel heater plug… any suggestions
@FASSFuelSystems3 жыл бұрын
Thank you for letting us know! We actually have a tech line that will be able to help you out here no worries at all! The number is 1-866-769-3747! Appreciate you Joe!
@solveetcoagula18913 жыл бұрын
If someone is to install a pressure guage, would it be easier to screw it on after installing the bowl?
@FASSFuelSystems3 жыл бұрын
Hi there! Our service team would recommend screwing the gauge in after installing the DFD. If they can help with anything else, don't hesitate to shoot them an email at techsupport@fassride.com, or give us a call at (636) 433-5410! Thank you!
@solveetcoagula18913 жыл бұрын
@@FASSFuelSystems what size is the port? Would the edge pressure sensor work in there so I can utilize it with my edge cts3?
@FASSFuelSystems3 жыл бұрын
@@solveetcoagula1891 Our service team will be happy to help with that! As soon as you have a chance, please give us a call or shoot them an email. Thank you!
@21MRMISCHIEF3 жыл бұрын
What fuel pressure gauge would you recommend
@solveetcoagula18913 жыл бұрын
@@21MRMISCHIEF idk about them, but I was looking at one of the Edge CTS devices.
@loganrogers79343 жыл бұрын
I left that plastic cover and 2 screws should I be worried?
@FASSFuelSystems3 жыл бұрын
Hey Logan, just to double-check if you don't mind I would suggest giving our service team a call at 1-866-769-3747. Thank you!
@surfjat153 жыл бұрын
can you still bleed the system with this delete i. place ?
@FASSFuelSystems3 жыл бұрын
That's correct! You'll still be able to remove any air from your fuel system by adjusting the FASS filters. If you have any questions on the priming process, give us a ring at 636-433-5410!
@jasonjackson3293 жыл бұрын
@@FASSFuelSystems I don’t own a FASS. But I’m running a AirDog 165G. And 3months (now ) my factory filter is leaking 🤦🏻♂️. So can’t you just completely remove the factory one ? Vs using a delete style kit like this ? I understand this FASS kit is probably a better option as you can always go right back stock. But just curious if it’s possible without any issues
@FASSFuelSystems3 жыл бұрын
@@jasonjackson329 Hey there! when it's convenient, give us a ring at 636-433-5410 or shoot us an email at techsupport@fassride.com, and our service team will be happy to review some options.