Five Year Old Video and still helping knuckleheads like myself - THANK YOU SO MUCH ! ⭐⭐⭐⭐⭐
@tkshouse35475 ай бұрын
Thanks! I saw 2 other videos that were long and drawn-out. One never explained where the red wire goes. You did a great job explaining.
@robertandrews93556 жыл бұрын
This is the clearest instruction that I ever had on this subject. Good show!
@petebeasttexashomesteading6 жыл бұрын
Thank you
@jmarmstrong234 жыл бұрын
Pete B. If I wire a photocell to one outside light, will all 3 lights turn on/off if they are on the same switch?
@proteng Жыл бұрын
Thanks! I was about to give up on this damn photocell connection and you showed what wire goes where. Boom! My lights now are dusk to dawn.
@Pop_729 ай бұрын
Thanks for this video! You mentioned a delay on the photocell and brought an hour of confusion to an end.
@dartanianrubanne3394Ай бұрын
Thank you so much, an excellent tutorial. Very informative, concise, explained clearly, and slowly step-by-step 👌🏽 😊
@enavy585 жыл бұрын
Thank you Pete B! Your video is smooth and easy to watch. The lighting is good. You explain things and also show them on video. Did I mention your video is consistently in focus too! Only thing you might do better is to write out what you intend to explain and read through it ahead of time. Oh and NICE SHOP! 👌🏽
@petebeasttexashomesteading5 жыл бұрын
Thank you
@cherylquattry73694 жыл бұрын
Thank You. I installed one yesterday and went out flipped the dreamer on looked and the light was on. I then put my socket tester in to make sure everything was right and at that second it went out. Dang-it. Put my finger over the eye and nothing . So went back checked the breaker and was fine and the tester showed everything was right.So called it a night. Got up watched your video before I went down to buy another one and when you said it takes a minute or so to come on I got up with my coffee and reinstalled it. Flipped breaker on it went. Put electrical tape over the eye and a minute later on it came. Buttoned it up and went in for another cup of coffee as I’m done and never had to leave the house. Thanks to your video.
@petebeasttexashomesteading4 жыл бұрын
Awesome 👍
@hereibuypc69205 ай бұрын
Thank you for making this video, it really helped me installed a photocell.
@kimberlyluangphone67434 жыл бұрын
Thank you. Had to replace on old mercury light lantern to a new led light. Using the old photo cell in the existing yard pole. We didn’t have it wired quite right. But got it fixed and working thanks to your video! Only had to change one wire.
@petebeasttexashomesteading4 жыл бұрын
Awesome 👍
@adamagudelo-384710 ай бұрын
Your explanation of video is excellent for a beginner, Thank you:
@harrysurtees87104 жыл бұрын
Best how to video I ever saw. You make it look easy. I am going to try myself. Well, on second thought, I will have an electrician do it. Now I can watch him and make sure he does it right.
@petebeasttexashomesteading4 жыл бұрын
👍🙂
@jreyes1062 жыл бұрын
After washing a few videos on KZbin and been frustrated for not understanding a bit I was lucky enough to find your channel and made all the difference in the world, you know how to explain things without any doubts or hesitation, you just don’t want to act but to inform and what a great job doing it. Thank you so much for the help
@Cherokee10g2 жыл бұрын
Great job Pete, in making this video, with the super high prices that companies are charging these days I'm sure there are many people who greatly appreciate you making this video, the nice thing also you explain and show what you are doing very well, one thing you might want to mention is, in an actual installation a hook wire may be needed to hang the light unit while connecting the wires together, Thanks for helping others.
@matsuno4152 жыл бұрын
Excellent video, far better than most out on youtube! Clear instructions and wiring procedure. Thank you for posting.
@sleepingwiththedog4 жыл бұрын
Same thing as one of the other posters, I have 7 exterior lights with LEDs guessing 30 watts each. This photoecell handles up to 1800 so I am within the capacity of the photocell. I have been watching for videos explaining this, great video and, concise, well explained.
@petebeasttexashomesteading4 жыл бұрын
Thank you 👍
@seattlejayde4 жыл бұрын
This is an AWESOME explanation. THANK YOU. My complicating factor is I have. GCFI OUTLET between the power source and the load (the light) . I don’t know how to handle that scenario. Liked subscribed
@curt3562 жыл бұрын
Thanks for your knowledge on how to wire this switch. Great job.
@larryhoffman58582 жыл бұрын
Thanks for the video, I've wired them before, but just dropped in for a refresher course, thank you spot on.
@margaritaoliva35652 жыл бұрын
Thank you so much for this video we were able to hook this up with your video. Every step by step you gave was on point. 👍👍👍👍👍
@waldemmir9101 Жыл бұрын
This is the best explanation for this kind of project
@ACherimoya3 жыл бұрын
Excellent tutorial and explanation, thank you.
@sara1haider8 ай бұрын
Thank you for this video and the way you explained it. I did my light, and it turned on at night, but it is on for a few seconds and on for a few seconds. On and off.
@sara1haider8 ай бұрын
I need help. I'm not sure what i did incorrectly
@arnoldolorenzo34745 жыл бұрын
Very nice. Knows what he’s doing.
@petebeasttexashomesteading5 жыл бұрын
Thank you
@eddielaxton87612 жыл бұрын
Thank God for folks like you
@williamcrocker41934 жыл бұрын
Very helpful. Down to earth and clear
@petebeasttexashomesteading4 жыл бұрын
Thank you 👍
@JoseMunoz-jw9jr3 жыл бұрын
Thank you. Easy to understand where to conect each wire.
@seanhenley3385 Жыл бұрын
Thank you. Perfect video. Helped me figure it out 100%
@jorcorde28 күн бұрын
Thank you - very helpful!
@jerrygrayson84216 жыл бұрын
Fantastic video, your explanations are clear without any ambiguity. Thank You.
@petebeasttexashomesteading6 жыл бұрын
Jerry Grayson Thank you, I really appreciate that. Thanks 😊
@jerrygrayson84216 жыл бұрын
Pete B. I wonder why older older light sensitive switches had only two black leads/wires which was simply connected in series to the black live wire but new light sensitive switches have need for a common/white wire. Is there a new code making a common required?
@petebeasttexashomesteading6 жыл бұрын
Jerry Grayson Hmm... not sure. I guess there must be a new safety requirement.
@eozen814 жыл бұрын
Wow, amazing saving to use that LED external Pete, I have learnt something so cool thanks to you with this video I appreciate man for the detailed instruction on wiring!
@petebeasttexashomesteading4 жыл бұрын
Glad it was helpful!
@markfragel27702 жыл бұрын
you have a great way to explain this process, thx!
@akumaking12 жыл бұрын
Our instructor linked to this video to demonstrate what a lab project we'll be doing just before finals.
@petebeasttexashomesteading2 жыл бұрын
Awesome 👍
@blackhillsrider26263 жыл бұрын
Best wiring video ever!
@ricardovarajr2 жыл бұрын
Easier than I thought. Thanks sir!
@patbullard92762 жыл бұрын
Thanks, you helped me a bunch. I had the same light and today was having trouble getting the photo cell to work. I had the red from the photocell connected wrong.
@davec.31985 жыл бұрын
Very nice..thank you. I was ripping my hair out and then I realized there was a delay. :-) Mine was about 60 seconds!
@petebeasttexashomesteading5 жыл бұрын
👍
@dalet229 Жыл бұрын
Me too. Thanks for that additional info 👍.
@jdtaxpayer8012 жыл бұрын
Good job...very clearly explained, thank you!
@adolph28918 күн бұрын
Awesome, thank you very much
@nugentji11 ай бұрын
Great presentation. Thank you.
@caught_u_slippen44994 жыл бұрын
Worked great for me just had to bore my own hole. Thanks.
@petebeasttexashomesteading4 жыл бұрын
👍
@efrenreyes14964 жыл бұрын
Some photoeye manufacrurer recommend that you face your device to the western hemisphere, so the light comes on as the sun set but not up the sky because once the eye is covered with snow or collects dust film and get blurry it will not function properly.
@petebeasttexashomesteading4 жыл бұрын
👍
@carloslemus45727 ай бұрын
Muy buen video gracias por la enseñanza y muy bien explicado gracias
@crazymoon616 жыл бұрын
Thank you, you made this easy to follow that old dog like me could install my photocell.
@petebeasttexashomesteading6 жыл бұрын
Awesome, I'm glad it helped you out.
@cedricthigpen77763 жыл бұрын
00
@stephennorthcutt887411 ай бұрын
Very informative. Thank you.
@richjohanson23686 жыл бұрын
Very good explanation that some are instant on and some are not. I couldn't figure out why the switch would not turn on the light when I put my thumb over the sensor. Guess I just didn't wait long enough..
@petebeasttexashomesteading6 жыл бұрын
Yeah some just take a little longer.
@knightingalesaid2 жыл бұрын
Thanks so much for the video. It was very helpful.
@gregaryarnsdorf1214 Жыл бұрын
Well done thank you!
@petebeasttexashomesteading Жыл бұрын
Glad it was helpful!
@ronaldmejia68912 жыл бұрын
Thanks for the video and time. 🙏🏽
@locovidepro3 жыл бұрын
Great video and a fantastic explanation.
@cleanpoolpr6 жыл бұрын
Excellent tutorial so easy to understand. Thank you and blessings.
@petebeasttexashomesteading6 жыл бұрын
Thank you
@kacavisakismastormastor22686 жыл бұрын
,превод по Бьлгарски
@toddroddy34413 жыл бұрын
Great video! Very informative step for step.Thanks !
@petebeasttexashomesteading3 жыл бұрын
Thank you 👍
@BPEMETO2 жыл бұрын
Thanks for the video!
@brianbouwkamp75452 жыл бұрын
Thank you for being great!
@suzannemendez77175 жыл бұрын
Great job Pete. Thanks for the help.
@petebeasttexashomesteading5 жыл бұрын
Thank you
@dannyboy92542 жыл бұрын
Best explanation 👌
@tyronemontgomery80544 жыл бұрын
Thank you so much for making it plan & simple !
@petebeasttexashomesteading4 жыл бұрын
👍
@jamesanderson72666 жыл бұрын
Good explanation - easy to follow. Thanks!
@petebeasttexashomesteading6 жыл бұрын
Thank you
@dragonz6163 жыл бұрын
THE BEST VIDEO,THANK YOU SIR
@desperado777602 жыл бұрын
The last minute for quick review
@mikeparrish65583 жыл бұрын
Good tutorial. Thanks for sharing.
@johnlozano50544 жыл бұрын
Thanks so much. You make it pretty easy.
@petebeasttexashomesteading4 жыл бұрын
You're welcome!
@JJ-iu5hl3 жыл бұрын
He says: If you're not an electrician, don't attempt this... even though you wouldn't be watching this if you were an electrician 😂 Informative video though.
@glarosawfms59983 жыл бұрын
Awesome video. Helped a lot!
@DJTrapillac3 жыл бұрын
And say if u wanted two , They can be daisy chained ?
@dalet229 Жыл бұрын
Great well detailed video
@petebeasttexashomesteading Жыл бұрын
Thank you!
@iammusic1950 Жыл бұрын
The action starts at 7:50 you're welcome
@eaker88923 жыл бұрын
thank you! very much enjoyed this
@enemygaming87692 жыл бұрын
Had a question if you don't have a ground on your light can you still connect it with no ground cord from. The lights just the cable
@abh1142 жыл бұрын
Thk you 🫵 sir! Big help 👍
@petebeasttexashomesteading2 жыл бұрын
Welcome 👍
@juanalvarado6667 Жыл бұрын
Good explain..buena explicación
@esmerlincaraballo25093 жыл бұрын
Good explanation 💪💪💪
@nmralsamr Жыл бұрын
You did great video thank you
@petebeasttexashomesteading Жыл бұрын
Glad it was helpful!
@felixpoy78722 жыл бұрын
Very well explained, thx
@nightmare9563 жыл бұрын
Incredible class
@willielugo39724 жыл бұрын
Thank you !
@petebeasttexashomesteading4 жыл бұрын
👍
@robertgarcia64725 жыл бұрын
Thank you sir very informative 👍👍👍
@maxwellmarlin8803 жыл бұрын
The one I’m replacing has a two minute delay. Black tape time
@NEK1072 жыл бұрын
Thanks man 👨🏻
@karim89043 жыл бұрын
great !!thank you so much I have it :)
@burundiiwacu12134 жыл бұрын
Thank you, very useful you should be a teacher
@petebeasttexashomesteading4 жыл бұрын
Thank you
@aerospacesystems86584 жыл бұрын
Great explanation. Thanks.
@petebeasttexashomesteading4 жыл бұрын
👍
@79184762 жыл бұрын
What happens if you connect the red wire from the switch to the black hot wire from your house
@petebeasttexashomesteading2 жыл бұрын
Not sure because that's not how the switch is wired for. If you switch the red and black it might still work because it's just an on off switch. But best to connect it as I did in the video.
@surpk15 жыл бұрын
If it's just in essence a switch why does it matter which wire goes to red or black? I know it does because I had the blinking lights issue before I wired it as you suggested. Thanks for the vid.
@petebeasttexashomesteading5 жыл бұрын
👍
@gregoryjones26652 жыл бұрын
I call that stew/plug an, “uh-oh” plug😂.
@deanhenthorn18904 жыл бұрын
Some photoeye switches have built in capacitors built into the circuits, thus the delay is from the de-energizing of those capacitors. This design was to help reduce strobing at sunsets.
@petebeasttexashomesteading4 жыл бұрын
👍
@bocfat2 жыл бұрын
simply explained
@MajedAlbakr5 жыл бұрын
Great video! I do have a question. I currently have almost all exterior lights on a single circuit. Can I install the sensor (Brightness not motion) to control all of them?
@petebeasttexashomesteading5 жыл бұрын
Yes, you can, but it can only handle a maximum of 1800 watts. So you will have to add up the watts of all the lights it will be powering.
@marshpirate292411 ай бұрын
What light are you working on?
@7Nahshon4 жыл бұрын
Great video! Thank you 🙂
@petebeasttexashomesteading4 жыл бұрын
You are so welcome!
@jarvissmith51383 жыл бұрын
Thank you
@heroknaderi4 жыл бұрын
I appreciate your video thanks 🙏 also I’m curious if you exceeded the maximum wattage will it burn or overheat
@petebeasttexashomesteading4 жыл бұрын
I've never exceeded the 1800 watt max and I'm sure it will over heat.
@benjulionzambrano85014 жыл бұрын
@@petebeasttexashomesteading appreciate your video. Hey how can I install a photo cell control light and a switch control light in the same circuit?
@lubricator Жыл бұрын
Pete, Thanks for the video. I have a question for you. I am going to replace a nonadjustable photocell mounted on an exterior wall that points directly an opposing wall which creates reflective light. That reflective light causes the bulb in the fixture to cycle on and off. I am going to use the photocell you showed in the video as the replacement, so that I may point the photocell straight up. The hot wire in the wall goes into a box and of course the wire going to the light fixture is also in the same box. I don't know which of those wires is the hot wire. I don't have any testing equipment and could jerry-rig a light fixture to the wires in the box to find the hot, but before I do that I thought I'd ask you if it makes any difference in the functionality of the new photocell if the hot wire is connected to the red lead in the photocell, instead of the black wire, reverse of what your video shows? Greg from Sacramento
@petebeasttexashomesteading Жыл бұрын
The hot wire from the house (black) has to go to the black wire on the photo cell or it won't work. You can pick up a volt meter fairly cheap. Turn off the power to the light and undo some of the wire so you can test it and make sure the power wires are NOT touching anything else and then turn the power back on. Then put the volt meter on volts and put the black wire from the volt meter on the ground wire (green or bare) and the red wire from the volt meter on one of the other two wires. When the volt meter reads 120, then you'll know that the red lead wire that it's touching, is the hot wire.
@lubricator Жыл бұрын
@@petebeasttexashomesteading Thank you Peter. The photocell is arriving today before 10:00 PM. I'll follow your expert suggestion before it gets here.
@lubricator Жыл бұрын
Pete, all is well now and the sun is doing all the switching. Thanks again!
@timotoole872510 ай бұрын
The red is called a switch leg
@frankortiz50083 жыл бұрын
Good stuff
@petebeasttexashomesteading3 жыл бұрын
Glad you enjoyed
@burnhamben14 жыл бұрын
Why would My replacement light go off and on during the day? By the way thanks for you video.
@petebeasttexashomesteading4 жыл бұрын
Not sure what type of light you have but if it has a photo cell and a motion sensor, the photo cell might be bad telling the motion sensor it's night time when it's really day time.
@johnbinsfeld91792 жыл бұрын
I know I’m late to the game, but does anyone know what light this is? I’ve been having trouble finding something similar and can’t find the light on the Amazon page for this series. Thank you in advance!!
@johncarnettie68043 жыл бұрын
Dude thxxxxx!!!
@raekc48395 жыл бұрын
Simple enough that I think will try. (A Junction box works same way as the light fixture right?)
@petebeasttexashomesteading5 жыл бұрын
Yeah the light fixture in the video has a build in junction box. You can put the photocell in a junction box and then to a light.
@raekc48395 жыл бұрын
@@petebeasttexashomesteading I had wires coming out of a soffit in an old house. The porch light was wired down the soffit & came out into junction box. No green wire. But replaced the old sensor (this same type) the way they had it wired and it worked! Would not have had courage to even try if hadn't seen this video. My wiring was old and had white black and red wires coming out. Sensor's red had to connect with a black and a red from that junction.
@prairiedoggy16 жыл бұрын
Doesn’t the nut go on the sensor shaft before screwing it intothe fixture? That way you can lock the sensor into any position.
@petebeasttexashomesteading6 жыл бұрын
You could do that but since the fixture is threaded you can also do it from the outside to lock it into place.