Totaled 2021 Civic Type R Rebuild | Ep. 22 (Rebuilding the K20C1 Engine!)

[@nicolasolguin7697]

Gotta respect the fact this man does 90%of the work himself and if he don’t know how to do it he learns by trial and error , you got other KZbinrs having other people assembling their WHOLE build and they sit back and record smh

[@chriskarsseboom2200]

Yep

[@lcameeno1]

Nothing wrong with that

[@no_lft_shft]

The man deserves all the damn subs though for real

[@Liperium]

@@lcameeno1 But something to be proud about doing it yourself and learning along the way. Way easier to pay other people and re-use that money again to do so. Learning takes patience and a lot of time. My man is doing bodywork, have you seen TJ paint? Adam? nope Just a different vibe/content. But one is definitly more a "car" guy than the other one.

[@henrypark4577]

Cool bro

[@DJ_Driven]

Add a smart doorbell with notification and or a doorbell with an air semi horn so you don't miss those deliveries. Also, you'll have a recording to show if they really did attempt to delivery. I had this happen with you UPS a couple weeks back.

[@msg4lifesucka]

I think he does have a ring doorbell.

[@OlegMironov93]

Никогда не спонсировал каналы где либо. Смотрю редакцию с самого начала и надеюсь вы сможете продолжить свою работу благодаря спонсорству.

[@doctorrobert60]

Devin deserves to enjoy this car to the max once is roadworthy. Quite the journey getting this sorted.

[@stefanb974]

Dude is a legend. Been saying it for 2yrs plus.

[@roscoebluejay]

love love seeing you work on something new. youre killing it

[@michaelrotherham5159]

New it’s been a month

[@roscoebluejay]

@@michaelrotherham5159 I’m talking about this content vs the typical evo content

[@Andy_F.33]

Удачи Дэвин.!!!Отличная работа.много было в этом проекте подводных камней.

[@jonathanransom9861]

Not sure if i missed it, but it didnt look like you put any hondabond on the high pressure pump base. The base is the part that bolts to the head and high pressure pump bolts to it. Also, the fuel joint pipe that runs from the high pressure pump to the rail is a one time use item. The new pipe should come with polyethylene glycol that should be used. Not using a new joint pipe can cause fuel leaks right away or over time. Honda tech of 10yrs. Keep up the good work!!

[@reloadingdontshoot1]

As a self taught mechanic of only about 5yrs, it's just mesmerizing to watch you build and subsequently rebuild this engine ahha. Keep em coming! Learning a ton from this project

[@catrakrisandi4793]

Wow Almost Done for engine,Hope Working like before..Support Hard Work like you 😊👍👍👍

[@alexandrepagaime1981]

This man is a machine and he will be able to get this FK8 purring like a kitten again 👌 I look forward to seeing the next episodes where, for sure, this machine will be able to bring a smile out of all of us, when it starts working at 100% ... Hug from Portugal

[@peterclarke6476]

Dude got Skills on everything. 💯

[@aomidnawabi2964]

Hey man I hate to set you back again but if you pause the video at 0:49 and zoom into the cylinder on the far right of the screen you can see that valves hit the block and are probably bent

[@michaelgleason4791]

Love this guy. This car kicks him in the nuts every day and the next morning he's excited to go at it again.

[@renatkatana1826]

Большое тебе спасибо Девин, за упорство и старание, и самое главное что делаешь сам, это нужно обладать большим энтузиазмом и опытом, это нормально что бывают ошибки, но их не допускает только тот кто ничего не делает. Удачи тебе в твоем проекте, у тебя все получиться!!

[@CmapMex]

Поддерживаю

[@0tohunred]

When talent meet determination

[@Shiznaft1]

Devin, your work ethic is amazing. Sorry you have had such a hard time with this build, I imagine people have learned a tremendous amount from it.

[@texaspowerman]

With the number of engines I’ve watched him rebuild in just a few months I’d think he would get a port and polishing setup and a valve cutter. Cars run so much better on a properly ported head it would seem to be worth the time and effort, though when you can just turn the boost up a few more pounds I’m guessing it just doesn’t matter as much as a head the breaths properly. So much work into this car, and isn’t this the first Honda he’s built? It’s going to be a “ripper”.

[@islandbwoytaekwondo6545]

Devin I seriously love and respect your work ethic brother I would love to some day work with you if I’m up that way or you’re down in Colorado keep up the good work respect

[@ccm-racing]

Yes progress. Great to see it all coming back together. Strong effort bro 👊🏻

[@sauske1398]

Hey Dev, i think this may help. I believe if you get a subscription to a website like or similar to “alldata” it will allow you to to find out pretty much anything/any car to manufacture like the torque spec to and very specific questions concerns to any vehicle. Hopefully this helps man been watching you for awhile! Good luck on the build👍🏽

[@opadilla123]

Ive seen all the episodes and will see them till that type r is running perfectly

[@garynewell6947]

amazing work Dev i bet you cant wait to really drive the Type R

[@michaelanderson2689]

Hopefully that head or block hasn’t been knocked out of shape and requires machining before reassembly!

[@dennismoroz1289]

THIS MAN DOESNT STOP

[@rizzor80]

If that car could talk it would say "thank you so much for doing this" , can´t wait to see it done !

[@vdubgtiismine]

Ayyyyy my brother works for Golden Eagle manufacturing lol. That's awesome.

[@richardreyes3566]

Hey Devin all the way from Australia watching your videos .Your an inspiration to me just bought a WRX 2004 bug eye station wagon , going to do a few mods on it. Keep the videos coming hermano. Chao Ricardo

[@junaidjamshedmemories5693]

this session was best , like coconut cake. loved

[@onielwilliams4983]

Looking forward to see everything working I think fix Al the problem now ❤ looks perfect

[@spanekjindrich3297]

Klobouk dolů super práce držím palce.

[@obengderrick3021]

Yes you are back finally and I know you hit the road this time 🙏🏾

[@fireghost2978]

Yeaaaaaaaaa progresss...hope ....IS NEVER LOST.......

[@fireghost2978]

Brooo pls stop scaming..ok get a life 4 real...u trolllll

[@JustAnMMAfan]

Awesome video bro. Amazing progress for today lets go!

[@cecilmiller6557]

You have inherent skill, part of your DNA .. great video

[@KarinHonda]

You are great at what you do and the vids r amazing, nice music well edited and all

[@xImKingx]

Fav KZbin channel 🙏🏻

[@mattmesser893]

Love seeing the progress on the Type R! Have you ever thought of doing an Evo X hatchback build? 2010-2011 Ralliart Sportback might make for a sick Evo X conversion

[@justint8079]

Thought I was the only one that Lowkey had a soft spot for the hatchbacks, would love to see a varis front end done 🥵

[@imcalebfr]

i havent been this invested in youtube videos in a minute. thank you for the content

[@bjornwiking1054]

Great work so far! Love to se a Bobbi speced Type R...

[@tracyyy99]

Loving this build.

[@hectorbgp2733]

Bro this is so addictive!!!!! Keep up the good work!+

[@codychallenger0666]

Crazy how when we first started this at the 1st start up it sounded great ND everything sounded good.. then after was together again it was running bad from start up.. was very weird how that happened otherwise I know you would of rebuilt it as u were doing the rest of the car! I watch for a mew episode everyday man! Ty brother

[@truetony2291]

Always look forward to your videos. Car has come a long way from what it was. I hope that you do different cars more often to expand your knowledge and take a break from the Subarus and Evos for a while. Been following for years… it’s nice to see a difference. Hopefully the supra can get built next?

[@andyg5004]

There is a sequence of thr hesd bolts when u torqued them down as well

[@Volcom_StoneD]

Respect from Greece 👌

[@mikek9780]

The song at 4:40 is kinda becoming Devin's theme song, lol

[@Pallidus_Rider]

Glad to see engine building back on the channel 👍 Would be nice to see an extreme NA build for Mitsubishi Lancer wagon ... 🙏

[@carlostyper153]

Saludos bro desde Mexicali BC México 🇲🇽 Ánimo ya casi queda el TypeR 🙏

[@dmoskva]

Hey Devin, Alldata has repair manuals for 2019 Type R with K20C1 engine. It's a $19.99/m subscription. If you run into anymore issues like that might be worth getting it for a month just to have all the info available at your fingertips.

[@mauriciolima4947]

Wow... Pretty buildind bro... Keep calm and will done.

[@jamieoliphant4035]

Awesome videos dev keep rocking 😎

[@paulwitulski1905]

Awesome work Devin. So between the last episode and this one, nothing had to be rebuilt about the short block or cylinder head? It just being off alignment with the dowels, it was just repurposing most of it? I wish the best man, its just like for something like this if it went this far then I would think almost everything should have been either measured again or inspected. Cross fingers. Overall I think it will run but did you want to really 100% rebuild it or get it just running. Idk, I guess even I have had so much stuff in the past that should have just been deep dived into versus, get back to running condition.

[@BananaEvo]

Would suggest using Honda bond with the valve cover gasket or it will leak oil.

[@wubbalubba4205]

Your my inspiration keep up the amazing work‼️‼️

[@nickoduroannoh1265]

Nice background music!!

[@SamPilgram]

Read the INFO above 👆👆 I have something for you 🏅 Appreciate your feedback...👆👆💯💯💬💬

[@ColoradoDorado]

Nice engine my friend ,from spain Bryan nice too meet you friend.

[@Spacebirdy]

I don't know if you use ALLDATA, a platform most mechanics I know use, but you should be able to find everything you need to know on there. Such as your head bolt torque specs.

[@n8dizzel4shizzel]

Honda motors are so simple compared to so many other motors.

[@itsneuman]

Fubar'd alignment dowls make for good give a ways. LOL

[@diveaddict6885]

Nice work lots of respect

[@NathonDrake]

I think here, hufe mistake was that, head was not done on the machine, every time you are getting off the head it should be donе on grind machine.

[@rockdrummer80]

When the new cylinder head bolt is installed 5. Apply new engine oil to the threads and under the bolt heads of all cylinder head bolts. 6. Torque the cylinder head bolts in sequence to 40 N·m (4.1 kgf·m, 30 lbf·ft). Use a beam-type torque wrench. When using a preset click-type torque wrench, be sure to tighten slowly and do not overtighten. If a bolt makes any noise while you are torquing it, loosen the bolt and go back to step 5. 7. After torquing, tighten all cylinder head bolts in three steps (90 ° per step) in the numbered sequence shown. NOTE: Remove the cylinder head bolt if you tightened it beyond the specified angle, and go back to step 3 of the procedure. Do not loosen it back to the specified angle. Tighten the cylinder head bolts to the specified angle, using a commercially available angle gauge.

[@rockdrummer80]

Sorry I cant paste a pic of the sequence

[@konstantinosnikolaidis]

Nice job mate well done !!! 😉

[@jamesharrison3459]

Love the videos, it helps me with my build. I'm waiting on a digital torque wrench so I can torque my heads. Keep up the great work❤‍🔥❤‍🔥❤‍🔥❤‍🔥❤‍🔥💯💯💯💯💯

[@reneilsmith8409]

Am in love with your m3 every time i see it😍😍😍

[@tradeMark182]

Solid video today bud ..allright

[@jomarlinmontilla9381]

Love the content brother, sugestión for you try to meet the fedX guy normally is the same guy always bless them and treat them well you will have your package always , you can set up a drop box so they could leave it

[@iainl8287]

You are freaking brilliant👍👍👍

[@kixx027]

Im so excited bro.

[@Ranma_Saotome]

He assumed that the head bolts go to 30 foot pounds and left them that way? What a guy! Lol

[@j0hnny483]

Nice progress! Can't wait for the next video. This has been a labor of love...what do you plan to do with the car after it's mechanically sound?

[@omarquezada6943]

Remove the head off the sureshot and drill one size bigger of the head and it will spray out with more pressure and more accuracy coming from a dealer apprentice you’ll thank me later hopefully you show it in the next video you use your sure shot 👍🏽

[@theodorehartman5086]

Devin, A master mechanic at work.

[@eundaddy]

Very lucky only the dowel pins were damaged!

[@mikes.4811]

FedEx is probably the worse of the carriers. I had someone ship an item in a USPS box through FedEx. It got here with big gashes in it and crushed. Luckily, it was only a cable and didnt get damaged. LOL 🖖

[@miguelgonzalez9681]

You know this engine more than I do but I do know that on a few engines the timing gear on the crank is centered using the key way. Just a heads up incase this engine is similar.

[@drivewaybuilt8944]

my finger nearly broke my phone screen I clicked that fast. Can't wait till she's finally finished

[@michaelrotherham5159]

This car better have 600hp all this effort

[@james.antonio]

Keep em coming 🔥🔥🔥

[@Codeman016]

11:36 did you already say you were getting a new valve cover? I know that you said a new intake, but this looks damaged too.

[@myspaceshipdumped5217]

Crazy knowledge 😊

[@jrus1]

Anyone know what the beat is called at 13:30. Good video though!

[@IntegraDIY]

I know it’s just vids on progress, but I feel that most of these vids have cliff hanger endings.. we wanna see it rip already 😅

[@DialedInAutoDetailing]

I got $100 the FedEx guy watches your channel and sits at home watching your videos to hear you rant about your package not being delivered lol

[@manuel13200]

This guy is going to end up rebuilding Lambos a Ferraris very soon , awesome good job 👍🏻

[@nobel2985]

Respekt, meinen Daumen hast Du....🔰🤘

[@bluacuras]

Type r lifestyle

[@dennissterner3350]

Getting there.

[@harrisonmorin616]

Oooh yeahh baby ❤

[@MrJopeeeno]

Great job man👍 Also the FK8 facelift and every day I look forward to YT to see if your next video will come out, because it's a really nice spectacle. But I have a question. When you remove the cylinder head, isn't it necessary to level it and perform a twist of the seals? As a rule, it deforms easily. I also wouldn't use the old head screws, the original ones may be stretched. Don't take it the wrong way, I'm just interested in other procedures.

[@ihate5x112_]

ik he did grab new head bolts and head gasket and dowel alignment pins, not sure if he got the head resurfaced or not though but good point

[@MrJopeeeno]

@@ihate5x112_ I don't know, although I have an auto repair school, but repairing cars has not been my main source of livelihood for a long time. I don't want to insult the author of the video, he has great taste and diligence. I don't deny that and I admit it. But I have learned this procedure. When the aluminum cylinder head is removed, it should be leveled on the lathe, sometimes the same goes for the block. We never used the original screws used to connect the head and the block. I'd like to be wrong, I don't know modern Honda repair procedures.

[@kysonreber2658]

Doesn’t the Keyway hold the balancer in place too? That’s how it is on D and B series…

[@dugangant]

Did you get a new timing chain cover? I know you said the other one has cracks but wasn't leaking yet? Also surprised you didn't send the head to machine shop to make sure it wasn't warped unless you checked it and didn't show it.

[@craigjohnson5189]

Hey Devin, any chance you could post up the part number of those head bolts? I've been getting 2 different numbers and want to know the thread size and pitch. Cheers!

[@alanvargas4821]

Let’s go 🔥🔥🔥🔥🔥

[@forty-glocc]

every time i see something i order say it’s coming from fedex i know i’m never getting it on time. Fedex legit is the worst logistics company. My UPS packages come no problem. Keep pumpin out the fuego content my guy

[@benjoaves8767]

Try pro demand, you can find anything in there :)

[@derekbuilt7761]

29ft then 90 degrees then 90 degrees again and if they are new head bolts go 90 degrees again.

[@leftyo9589]

a fedex shipment delayed, say it aint so! so common its surprising when it shows up on time!

[@barelyrollin]

Shoulda epoxied the walls on the block. Doubt it’s gonna stay stock for long unless it’s a giveaway car or something