I TORE DOWN THE STI ENGINE, IT GET'S BAD.

WIN THE STI: dvniemela.com/
• Links to Where I Purchase Parts:
eBay: goo.gl/LwmuxE\
As an eBay Partner, I may be compensated if you make a purchase
Amazon: amzn.to/2z6hMbF
• Camera Equipment I Use:
Main Camera: amzn.to/2W2ZLId
Backup Camera: amzn.to/3gMgjwj
Go Pro: amzn.to/31Yi59n
Main Lens: amzn.to/2ZX7ZTB
Backup Lens: amzn.to/2W2OgAM
Photo Lens: amzn.to/2O8sc35
Microphone: amzn.to/31ZRDfo
Drone: amzn.to/3iMOIwJ
Gimbal: amzn.to/321daUZ
• Instagram: / dvniemela
• Facebook: / dvniemela
• Sponsors: (Discount Codes)
avalonking.com/ref/dvniemela (DEVIN25)
SK Tools: bit.ly/3mdXhSl (DVNIEMELA)
IAA: bit.ly/3cMmRKk (DEVIN23)
www.braumracing.com (DVNIEMELA)
www.prismaticpowders.com

[@ckemiss]

i love the cold start for da boys

[@CrMo4130]

Tip on the allen’s that strip on ya, use the straight shanked ones for breaking lose and TQ’ing down, the ball head /wobble ones have a very small surface area and are best just for low TQ requirements.

[@xxtimeisthefireinwhichweburnxx]

Seeing Bobby made me remember, I set foot inside a chapel for the first time in almost 25 years because of the gig I was working at earlier this month. I know I joke about you guys having to have the wedding outside because Bobby would catch fire if she set foot in a church. I was kind of scared I actually would when I walked through the threshold, having joked about it so much with others and their spirituality...😆😆😆

[@shawnmartin1841]

Dang that is crazy and good thing you are very thorough job on all your builds

[@sherwaynewilliamson7072]

Thank you lord...I wasn't gonna eat lunch until you posted....Your my go to lunch and watch...if you didn't post I would just rewatch a old Vodeo❤❤😅😅

[@xImKingx]

Crazy how this exact thing is what I noticed on my block last weekend when I took the heads off

[@pab1it05]

This is a killer series!!! Just a question, where do you get all of your torque secs and clearance specs from?

[@jclc4201]

My man doin it again. I hope you get good returns FINANCIALLY for these car giveaways you do since you pu so much effort and money in making these cars look perfect. 👌💪💥💯🇵🇭👍

[@christopherthompson9642]

Good on you for breaking down the block. 🤙

[@robertwilbert1317]

Glad you tore it all the way down to find that…love the content….

[@Nickshukri]

I loved the time lapse and music I missed those as well lol

[@danielsinyakov1588]

Perfect video for lunch break, also I thought you were going to say what turbo is going on in this video

[@EM29011]

The subi vids are my favorite

[@tomlarsen6146]

Taking that sti to the Midwest! Yeewwww 🤙🏻

[@disaster6467]

man i remember when i used to tear down my wrx motor back in the days, i used to have a 02 wrx with a hybrid block 2.5l with 2.0 heads, mated with a 07 sti transmission, wiseco pistons with eagle rods, these engines are actually pretty easy to work on

[@coreyscarrepairs]

Those allens and phillips (or JIS, unsure) - always give them a couple love taps with a hammer before trying to loosen. It shocks them and helps them break the tension and come loose easier.

[@Icandothatalsow]

Ball Allen wrenches are not the way to go for tight fastners

[@Fackler91]

Would love to see it make 450. Great job so far!

[@ksathon3583]

Hi Devin, im the first one who miss thoses time laps with music Brother 😭😭 i re-watch all old video series to heard them again and remember the old ride ❤️

[@josephbreen9955]

Great job

[@WrxyDriven82]

Hey devin.. looks like thid build is turning into like youe EVo build. I strongly suggest you just do a refresh closed deck build with all new seals & gaskets for the block. 😊

[@BNR_248]

I wonder how the bores are on e85 cars sitting in garages over an extended period of time. That fuel attracts a lot of moisture. Probably good reminder to drive your car at least once a week, put a fresh film of oil on the bore and burn off any accumalted moisture.

[@levihutchins8467]

Yo Devin put valve grinding compound on your allen head sockets and 99 times out of 100 won’t strip the allen head bolts. The grit in the compound fives you a lot more grip and it’ll bite instead of slipping. Works on all sizes (including cam gear allen bolts)

[@wazzy336]

i use this when im working on jet engines for commercial aircraft and its freaking amazing.

[@dthomas17dt38]

Also called EZ grip, done saved me a shit load of times. Damn that "military grade" hardware 😂😮‍💨

[@HuntersHouse-ge2xz]

jacob .. how d you know how to sort?

[@luiwr_x17]

I love it can’t wait

[@sf2372]

Those impact philips head tools are a god send

[@murphyow4359]

Hey! I’m from Canada, is the STI sweepstake’s only for the US?

[@thefieldofdreams_]

What about a sleeve it's cheaper if it's the only bore that's bad ?

[@shane23g-easy68]

What happen to the brand new truck?

[@ryancrane6545]

Try using a hand impact screwdriver on those Philips.

[@caskisner]

The stuff you call crusty is new we're I'm located 😂😂😂

[@enafe3408]

What is the chemical he used with water for wash?

[@panther105]

I guess no one uses those old impact drivers you hold and twist and then hammer the end of. The stuck allens made me think this might have been an ideal use for it...

[@spoolinekrhdhulk-urban-c-w5709]

Everything will get better playa

[@MartiMart031]

What happened to the other truck the red one

[@SoupGunMachine]

i really look forward to seeing who wins this beauty, such a badass car. best of luck to those who entered

[@youlikethatsideboob]

Present the Torx bit. I needed those

[@shabulamwaanga565]

when is the evo 5 gona get some attention?

[@spoolinekrhdhulk-urban-c-w5709]

That comes from low oil in the cylinder so make sure to shim your oil pump and port it 18:13

[@spoolinekrhdhulk-urban-c-w5709]

They make a manifold and map that deletes that 6:00

[@NapFloridian]

how to enter the Giveaway ?

[@Jonny_trans]

Fresh engine too, I'm going to have to get in on this giveaway

[@kendallcamacho.11]

Nice decision 🙌🏼

[@chrislizotte6603]

Mine ran with a cracked piston for years. Til it didn’t 😂

[@Fackler91]

If I win, it's definitely going on sick week, and the other drag events here in Florida. Sweet giveaway, though! Can't wait to see it on the dyno

[@TheOriginalSpawn]

Salute 💯

[@blueridge8992]

I really think it’s time that we start normalizing LSX swaps into STIs. If there’s anyone out there that could perfect the swap, it’s Devin! Do it for the children!

[@azizyahoo2819]

bro take a look the evo 6 what happened is not moving thre

[@Pittbluewrx]

Lets go new vid!

[@zaucyy6829]

Last episode “I’m not separating the block because it looks in good condition” This episode “okay guys we’re separating the block” 😭💀

[@juanluisportugal8339]

Use the left over parts to repair the other STi 😂😂😂

[@sierramilano6029]

Does this STI come with a 100,000-mile warrantee.

[@chinolocko9429]

Not a kia, that it comes with two replacement engines under 100k warranty lol

[@chinolocko9429]

You might as well go closed block and it will handle all the power your can throw at it!

[@kd3942]

Ahh i miss the music & timelapse

[@bobbyjones2363]

Truck trans ?

[@kevinadkins8469]

I think I can build a Subaru or Evo motor. I don't even own either one of those. I have an Audi.

[@Evolut10nX]

Build an octane blue 10 and then I’ll participate in the raffle 😬

[@ALEXFTW32]

What happend to the red GMC

[@iankrahel]

Returned it bc it was repainted before he even got it

[@VenomWorks]

He had to return it, they actually repainted it twice and it came worse every time lol

[@pnwtundra07]

Was hot garbage had the dealer take it back

[@jclc4201]

It was garbage. Sass dealer.

[@Miamisillest786]

Someone skipped the Q&A Hawaii video lol

[@spoolinekrhdhulk-urban-c-w5709]

They make T3/4 HYBRID I HAD BUDDIES FRO TN BUILD THE CRAP OUT OF EM 7:21

[@jhesterbico1555]

iloveu bobby

[@richt247]

Was getting a bit seasick with the camera angles lol

[@davidlowe3793]

I think you need a bigger mic on your hat lol

[@Davorox1]

😮

[@LOLP33S]

🎉🎉

[@Evil_ZK]

Nice spanish! 🧐

[@tomswindler64]

Nice 😎😎😎👍👍👍

[@spoolinekrhdhulk-urban-c-w5709]

Tac it turn it 12:19

[@strongerandwiser2023]

Dont the manual boxes in these shit themselves when you do launches with anything over 370bhp ? We used to eat them back in the day when we had 400bhp+ builds. Just dont launch it is the answer I guess!

[@sagesends]

The 5 speed on the WRX, yes. The STI's have a 6 speed that is good for all the powa (that a boxer can make at least. Throw a honda engine at it and it would explode XD)

[@Jonny_trans]

STI 6-mt is stout, this car has a unique transmission. 07 limiteds got the oil pump with the long ratios. It also has factory carbon lined 4/5/6 synchros. It's going to be reliable for a long time

[@gregprevite8548]

Facts. The 6 mt is solid. The 5 mt can fail if you look at it wrong. Some of the jdm gear sets are pretty good

[@twiththe3]

hereeeee!!

[@TURBOTRISTO]

Subarus go in the bin