HIKVISION WIFI CAMERA AND NVR KIT

This week we look WiFi kits from Hikvision.
These kits come with either 4 or 8 bullet or dome cameras, an NVR with pre-installed 1TB HDD, PSU’s and a HDMI cable. Cameras are 4MP, have built in audio, a range of up to 50 meters (dependant on environment) and are IP66 rated.
This is a quick and easy kit! When installed and turned on, the cameras auto-connect and can be deployed in minutes making this a rapid deployment solution for small property installation. We hope you enjoy the video. Feel free to ask any questions.
This video is powered by Seagate Skyhawk
Further information can be found here: www.dvs.co.uk/

[@DVSLTD]

If you found this video useful. Don't forget to leave it a like and comment down below. Subscribe and get the bell on to be notified about future content.

[@cityservcentercityservcent91]

how many meters the range of this wifi?

[@DVSLTD]

@@cityservcentercityservcent91 50 metres - this is obviously dependant on environment

[@salier25]

My friend I have the same device but I have a problem. The receiver can not find the cameras Please help me

[@salier25]

Please Dvsltd what is the normal way to add cameras

[@geektechtim4919]

@@salier25 this one can be loose contact of your camera or need configuration wps

[@kennyshepherd8311]

Thank you for the informative demonstration!

[@DVSLTD]

Thanks Kenny

[@user-lt6ds3ol4d]

nice video! I love using my Hikvision cameras together with Xeoma software, everything works just perfect

[@DVSLTD]

Thanks for watching 😀

[@gimmigzgy]

Very informative! Thanks!

[@user-xp5oi6xm1m]

works perfectly with my Xeoma software

[@scaginivanua]

great video thanks.

[@DVSLTD]

Thanks for watching!

[@mohammedjasheer8308]

Hi Dave, Thanks for the Video. Very Useful. Please upload the Videos for Joystick/Keyboards. (1105Ki, 1006ki, 1200Ki, 1100Ki etc.)

[@harounakongnyuy6315]

Great video understand

[@mohamadazizabdulsamad6081]

Tq for the knowledge.

[@mikee2056]

Hi Dave, very useful video as always. I have a question I hope you can answer. At around 13:40 in the video you show network traffic. It shows WiFi at around 8200Kbps. I have a DS-7608NI-I2/8P NVR. When I go into Net Detect, my net traffic via LAN connection NOT a WiFi is showing around 64Kbps, and never seems to go above that number. I have 3 cameras on the NVR. These are 2 x DS-2DE4A204IW-DE Night Fighter PTZ cameras and 1 x DS-2DE4A320IW-DE 20x Optical PTZ. Is my setup wrong. I would have thought net work traffic would have been a lot higher. I did set up this system myself, so I may have some settings wrong most likely. Any advice would be much appreciated. Best of the New Year to you as well.

[@johnthomas384]

If you want to impress your audience with a wireless system , perhaps redo this demo with the cameras transmitting through actual walls , drywall and or concrete walls. of course it's gonna work when it's setup in the same room. Now put it to the test and show your fellow techs how it does when installed through a couple of walls

[@jiem7126]

6m same room not run perfectly i wish its 1 cam /4

[@khalidsr1]

HELLO DAVE hoping your in a good health. I do appreciate your fine explaining video and I really enjoyed watching it 2 the end. Q.u mention that wireless is not good as well as a wired one , Is there an effect with time on the cameras because we r living in a hot weather like Middle east 45c🤪👀 . God bless mate and good luck 🌹🙏

[@DVSLTD]

Hi and thank you for your kind words, in short the Wi-Fi cameras do work but can be effected by environment issue like weather, or by building material like metal , etc and other RF devices , whereas cabled devices do not see the same kind of issue , so if you can cable this it would be better but of course its not always possible , these kits generally perform very well so should not give you to much trouble

[@tufgaming1257]

May I ask you sir? Can I configure the Camera and NVR in custom settings? Like I want to connect to our VLAN Wifi? These 4 cameras are connected only to its NVR?

[@Impakzy]

Nice video. Is it possible to connect wifi cameras using the LAN?

[@jamiedoble834]

Great video mate, looking at installing one of these kits for a client as routing cabling is a no-no - how much footage can be stored from a 1TB HDD with all 4 x camera's on continuos at around 14fps?

[@DVSLTD]

using H.265+ then around 15 days @15FPS , you can change the HDD to a larger size if needed mind , but will cost the extra of course 

[@paulsp2693]

I bought same kind of camera and wifi NVR but not the entire package of four cameras, presently I am struggling to pair the camera to NVR..any suggestion?...i activated the NVR and I activated the camera as well but I can't open camera login page on web browser,that's were i am stuck, any help would be appreciated...

[@henriquerodrigues423]

gostaria de saber , tenho um kit nvr de 4 cameras , meu aparelho nao esta me dando acesso ao painel a senha nao consigo resetar, é possivel eu compra outra central e usar as 4 cameras que ja tenho ? pra nao ter que trocar o kit inteiro

[@Prescottbush314]

Thank you! We were wondering if the Hikvision came in a kit. Their night color camera is superior to any other camera we've seen.

[@DVSLTD]

Thanks for the feedback , and only the Wi-Fi comes as the kit that we sell , but many sellers do offer kits to the customer base which makes it easier , 😊

[@pafbadz101]

Hello I just received this same HIKVision wifi kit and my laptop does not detect the NVR, I connected it with an HDMI cable and there is no detection watsoever and even the app says no network connection with my nvr but i have stable internet connection. Would be a delight if you help me.

[@vlackspyder8939]

I followed your instruction but the IP camera is always inactive. Do I need to use LAN in the NVR..? Thank you.

[@mohideenyasir9353]

Nice

[@nestorelle8757]

NICE VID man! I have a question . this wifi camera have built in microphone ?

[@DVSLTD]

Thanks and yes it includes a Mic 😊

[@eddyswinney244]

Hi there. I have the hik vision wi fi with 4 cameras.the nvr is in the room next to the tv and all 4 cameras work excellent.my internet is superb ..all 4 cameras work great day and night. The problem is the hik connect app.3 of the cameras work great but the camera behind the house won.t open the video It fluctuates between 75 and even 99% but just doesn.t make the 100% It tries then error code comes up. I.ve tried rebooting .unplugging but still the same.Driving me nuts.It worked at the beginning.As I said all4 cameras work great in the room.but that one camera doesn.t show anybodys app in the house

[@Schumaher7305]

Buna, as dorii s-a stiu ce pot s-a fac in privinta semnalului wi-fi dintre camera ip wireles si nvr wireles, problema este ca intre camera ip wireless si nvr-ul wireless este o distanta de vreo 3-4m si 3 pereti de beton armat si nu prea trece semnalul, exista ceva amplificator de semnal pentru nvr-ul wireles?

[@Abhay2288]

Hey great video. I tried with 4 C1C EZVIZ cams with Wi-Fi router with regular NVR. Results are bad. Video pretty intermittent. Any thoughts on this? Thanks in advance

[@DVSLTD]

Hi, we recommend a high performance wireless router dedicated to the CCTV

[@robof28]

Just one question ,port forwarding or hikconnect ,I did connect and was so easy but other people at my work say it’s not safe ?

[@DVSLTD]

Hik connect is a great function , you should always set a strong password and use different ports other than the default ones,

[@ed.t.hansen6499]

looking for poe box to power all wifi cameras. POE NVR for wifi would be great. Saves from runmng power supplies for each wifi cam.

[@jamesriverair]

Hi, great video! How far back does the playback go?

[@DVSLTD]

Thanks , depends on if constant or motion record so 7-21 days really

[@snbuthere]

does all the wifi kit have audio and what configurations do I need to make

[@emilioestebanjimenez4711]

Thanks for the video! I have a question can you help me? I installed this kit, but I am having some problems. 3 cameras are connected to an access point but they are slowing down the speed of the internet from the devices that are connected to the same AP almost to 0. Then I installed another AP just for the cameras and it is also affecting the devices which are connected to the other AP. I dont know how to fix this error. The speed of the internet is 150 Mbps it should not be a problem.

[@DVSLTD]

Hi , so the new AP that is connected just for the cameras is on a different Frequency and channel than the existing AP, IE there not causing the interference ?, the new AP does this wire into the router then or direct into the LAN port of the wi-fi NVR ? , you could try fitting a small 4 port non poe switch at the NVR then wire the new AP into this , the LAN of the NVR and the connection to the Router , the traffic should then go into the NVR primarily and not through the router causing this to slow down

[@Chioff]

hola, que tan largo alcance tiene cada camara respeto al nvr ialambrico?

[@ericokoeguale6629]

Can I connect this nvr to WiFi internet? If yes I would love to know how

[@salier25]

Please, dear, how to add the cameras normally, since DVR can not find the cameras

[@Schumaher7305]

Salut , se poate monitoriza temperatura de functionare a nvr-ului?

[@tejaskansara2276]

Sir I have DS-2CD202WF-IW camera and DS-7604NI-K1/W nvr camera has built in antenna. Is dvr automatically scan all camera or need to configure manually.

[@DVSLTD]

You can add the wireless camera If the Wi-Fi router and LAN of NVR are connected in same network

[@terryscott5525]

Hi Brilliant video. Wondering before purchasing is it possible to use your home Wi-fi routers as a kind of booster slash extra antennas to pick the signal up and send it back to the nvr through the network & would this be possible thought the network bridging part of the menu.

[@DVSLTD]

Hi , the cameras are designed to connect out of the box to the NVR SSID , you could login to the cameras needed and added to SSID of the home router and then add to the NVR via the LAN Connection if needed, the Adhoc connection on the NVR allows you to connect to a broadband wifi connection for app use , but you could use it I support to bring cameras in , not tested it that way to be honest

[@terryscott5525]

@@DVSLTD Appreciate the reply, trying to figure out if Wi-fi signal from the Nvr to the cameras is really poor or is unable to receive the Wi-fi signal due to the environment is there a way of using your Wi-fi routers to connect to the cameras, thinking that would completely sort out any Wi-fi signal issues then send it back through the routers and Ethernet switch’s to the Nvr would this be possible buy connecting the cameras directly to the router as if you didn’t have an nvr then adding them to the box or due to the box being Wi-fi would it try to take them of the router and place them directly back on to the nvr s Wi-fi.

[@terryscott5525]

Box meaning NVR 🤦🏻‍♂️

[@ecotts]

I couldn't get past the guy beating the box like a drum.

[@DVSLTD]

Why?

[@azadsree]

hello, is this camera support ''DS-2CD2051G1-IDW1'' POE?

[@dexterlaboratory7748]

is it possible to modify the nvr antena reciever to gain more strength on signal?

[@DVSLTD]

Not currently sorry

[@pks75465]

Cash Counter ko dekhne ke liye BEST Camera kon sa hoga, his se Currency ka no bhi aa jaye

[@adrianodefrancesca5488]

Is there a way to disable the WiFi from the NVR i am trying to connect the cameras to the homes Access Points and if my router is restarted it auto reconnects to the nvrs network and then the cameras go offline. Any help would be appreciated

[@DVSLTD]

you can login to the NVR and under the SSID change / disable this on the NVR web page, you will then need to login to each IP camera via the LAN port of the camera, and under its web page and configuration , you can then choose the new SSID you want the camera to connect to 😊

[@timberry3312]

Hi with this camera can u cut the network connector off? And tape over. Im thinking this is no problem...As i won’t be using it... WiFi and 12v power only. I will be drilling through an external wall for power source, and it would make the hole smaller and easier to feed through if I could cut.

[@timberry3312]

Also I have added the WiFi camera to an existing system.... (nvr with network wired cameras)... I did this by adding the camera thru the hik connect app. Nice and easy. However it won’t allow me to configure thru the nvr, I can’t remotely login to the camera, and when going thru IP address it doesn’t recognise any user/password or prompt me to set a new one up. Any ideas

[@DVSLTD]

Hi , personally I wouldn’t as it would void the warranty but you can technically do that yes and tape it up and make sure nothing shorts out

[@dominicheng5248]

Can the nvr support cloud storage?

[@cctvngstandalonewificamera5138]

Can I connect the NVR WiFi to my internet enabled hotspot? Will the NVR go online so I can view with hikconnect app without using a Man cable

[@DVSLTD]

It can be enabled for hotspot in the menu but I have not tested this function specifically or how it would affect the Wi-Fi camera performance , I will take a look

[@JuanCarlosFiori]

@@DVSLTD did you ever try to connect with the hotspot? Did it work?

[@lakerwin4142]

is the nvr box wireless instead of using the lan wired connection is that box wireless to just hook it with wifi

[@DVSLTD]

Hi , the NVR has wifi in it to receive cameras but you can adhoc it onto another Wi-Fi existing connection in the network setup , but it may effect the performance of the cameras using it for both

[@aloeasy]

Hi, can you explain me what means the yellow triangular symbol in down left corner ?

[@DVSLTD]

this is an event warning, generally the motion or VCA detection. Or it could be a exception like HDD issue, network issue etc.

[@elizermacaron5983]

Hi sir do you have an idea if what is the Wattage or power consumption of the Wireless NVR with 1TB HDD?

[@DVSLTD]

Hi , it will be around 20w max

[@elizermacaron5983]

@@DVSLTD ok thank you very much sir for your efforts.. God bless you.

[@MikeMichaels..]

Hi ,do they work with 5 G network or it's only 4 G?

[@puneetkhaitan506]

If nvr on ground floor and wifi camera on 2 nd floor aprox 25 ft still it work or not .

[@DVSLTD]

Yes its within the 50mtrs max , but environment can effect the signal like any RF

[@chachaboy944]

does this camera come with aacusense 2.0 technologie from Hikvision ?

[@XSBINSX]

Hi, does the NVR connect to network wirelessly or need ethernet cable?

[@DVSLTD]

Please use the ethernet cable for this side , it’s the most stable

[@modaudiophilippines6698]

how do the Cameras communicate with the receiver? is that via wifi or do they communicate through their own wireless signal?

[@DVSLTD]

They talk to the NVR built in WiFi direct yes 😊

[@okoolaja]

Thanks for this video. Is it possible disable blinking blue light on this HIK camera and how? Best regards bro

[@DVSLTD]

Hi and thanks, yes on the Turbo HQHI-K & HUHI-K and latest HIK-Connect app you can disable the sound and light from the App , there will be a bell icon next to the device which arms and disarms this function, also the IDS-(B) model DVR supports this , make sure latest HIK-Connect app is downloaded and firmware on DVR is latest 😊

[@okoolaja]

@@DVSLTD I now use this wifi cameras without NVR. Record on microSD for now.

[@iwenesjoekd5648]

Do I have to connect a router for this to work and can a WiFi extender be used to boost signal

[@DVSLTD]

Hi you have to connect it to a router for the app to work , but not the cameras , the wifi extenders would probably work , I have not tested them with this specifically but it’s the same principle 😊

[@Stefan.BV84]

Hello, thank you for review. The NVR can connect to router trough wifi or I need to connect via Lan cable?

[@DVSLTD]

It can connect to the Wi-Fi but it’s not as stable and I highly recommend you use the LAN connection

[@Stefan.BV84]

@@DVSLTD What is the distance at which it works optimally? Does it depend on the NVR or the router? Can I somehow extend the distance of the cameras via wifi extender?

[@DVSLTD]

@@Stefan.BV84 its up to 50mtrs but realistically probably more like 30mtrs in real life , you could use a wifi extender , you would need to web browse into each Camera and point to the new Wi-Fi extender , it should be ok though

[@Stefan.BV84]

@@DVSLTD Thanks for the answer. You could tell me how to browse in each camera, I put the IP adress in browser and redirect to the camera or its a link?

[@hikvisiona-b8514]

Great from Yemen

[@manjureddy3030]

How much distance it will be coming

[@highflowhighflow9896]

Can you show us the webview feed? did they fix the trouble with browsers not been able to run the camera screen? well can use IE but thats ofcourse terible idea , just want to use Firefox. I also try to pickup the rtsp stream, havnt got any luck yet, trying for months to proper setup my NVR

[@jahangirali88]

Use ietab addon

[@mikee2056]

@@jahangirali88 He mentions he just wants to use Firefox, I believe this addon is Chrome only??

[@DVSLTD]

on latest firmware for NVR/DVR its now plugin less so will work on chrome and Firefox , you can update most recorders to have this , there is also a full RTSP /HTTP document on how to do this if needed

[@mikee2056]

@@DVSLTD Where could I find this document please. In addition, no suggestions/ideas on my other issue mentioned here, regarding network traffic.?? Thanks

[@ryanhosiassohn6572]

Do the wifi cameras work on any Wifi SSID ? or do they only work by connecting direct to the NVR wifi ?

[@DVSLTD]

The kit is pre-programmed for the kit but the camera can be changed to talk to any SSID in reality

[@ryanhosiassohn6572]

@@DVSLTD Thanks, So can wifi cams connect to any WIFI SSID on the same network as the NVR and connect to any NVR ? or does the NVR have to be a special one ?

[@ryanhosiassohn6572]

@@DVSLTD Thanks, So can wifi cams connect to any WIFI SSID on the same network as the NVR and connect to any NVR ? or does the NVR have to be a special one ?

[@dominicotrera2203]

what the exact part number of nvr? i cant see the page of hikvision. this is available in asia? specially in Philippines

[@DVSLTD]

Hi , not sure on outside of UK but kit is NK44W0H-1T-2.8MM

[@bossmike.g]

Sir, my camera is not connecting automatically to the nvr we have same unit. Can you help I've been working on this for 5hours. I restored it to factory settings several times.

[@DVSLTD]

Hi , in this case please login to the camera web interface and under configuration and network look for the wireless setting, search for the NVR SSID normally serial number and connect to that network , it should then come on but you may then need to go into the ~NVR camera tab and search for the camera and add it in , 😊

[@bossmike.g]

@@DVSLTD Alright Sir I will do it after i get home and check. Thank you so much

[@jacekk6913]

Do the cameras connect directly do Wifi NVR[he is an AP?] or they use home Wifi Network?

[@DVSLTD]

They connect to the NVR SSID Direct from the box

[@adiemus36]

@@DVSLTD can I connect the cams to the home wifi to extend the range or they need to connect directly to the nvr ?

[@DVSLTD]

@@adiemus36 can connect to home Wi-Fi you need to login to camera and change the SSID it connected to 😊

[@tsslinktamil7404]

Network connection is mandatory for NVR?

[@sardarshahzaib2418]

Can we also add wired ip cameras to this nvr using a poe switch or does it not support that?

[@DVSLTD]

You can only add 4 cameras , and they come with the kit, if you lose wireless ones you can then replace with wired POE via the LAN

[@Spectre_Starlord]

Great info. I am eager to buy this 4cam kit can you please mention the model num of this kit so that I can place an order.

[@DVSLTD]

Bullet kit - NK44W0H-1T-2.8MM dome kit - NK44W1H-1T-2.8MM

[@bobbylockwood8195]

@@DVSLTD how much is this kit please

[@Bruisader]

I am watching it today 2020

[@SambandamNandakumar]

Hi, can i connect hikvision Or ezviz normal ip camera on this WIFI NVR via POE switch connect to same wifi router.

[@DVSLTD]

possible but as they come with 4 cameras if there all used we cant add any more

[@SambandamNandakumar]

@@DVSLTD yes sir, I understand.

[@golamkibriashipon6147]

For tv screen and connecting cameras to nvr no need internet connection in nvr?

[@DVSLTD]

Correct , internet is for App connection

[@golamkibriashipon6147]

@@DVSLTD thanks dear.

[@AussieRC]

can that camera connect to a hik poe nvr

[@DVSLTD]

Only over the LAN as it does not support POE itself

[@adrianseno4900]

sir, how do extend its range using a repeater

[@DVSLTD]

if using a Wi-Fi extender , you normally replicate the main one , but it may not be that good , not tried myself , I would put a high powered unit in the location and wire this back to the LAN port of the NVR , you can then login to the cameras using a laptop connected to the network port and change the wifi connection to the new Wifi unit , that would be better

[@eddyswinney244]

2 of my cameras work great 24 hours,but the other 2 only can see when its dalight

[@kevinwinklaar6273]

Can i connect the nvr wirelessly on my network ?

[@DVSLTD]

Yes it does allow it

[@vincentchew2185]

when can I get it

[@davej_25]

Hi what's the range on the cameras to the nvr ?

[@DVSLTD]

it is up to 50mtrs , this will be dependent on installation environment and building layout and material , as well as external factors like 3rd party RF systems 😀

[@tonyiznaola]

Is there a HIKVISION DVR/NVR with both Wired and Wifi capabilities?

[@DVSLTD]

This has both , wired and wifi 😊

[@tonyiznaola]

@@DVSLTD Great! Then, can I add Ezviz wifi cameras to this Hikvision NVR?

[@DVSLTD]

@@tonyiznaola They come with wifi cameras in the kit , but the Ezviz ones should also work

[@GianlucaSquicquaro]

what abt this HIKVision model ? DS-2CD2051G1

[@mikeg3774]

Hey Dave, I can't seem to find this answer for the life of me. If I have wireless cameras, do I need a wireless NVR?

[@DVSLTD]

Hey , not technicaly as you can add those cameras to a dedicated wife router or any wifi router , and if the hardwired NVR is plugged into the network as normal you can add the cameras like normal , just assign the Wi-Fi cameras static IP address to match the scheme and they will be more sable, I hope this helps 😊

[@mikeg3774]

@@DVSLTD Thanks!

[@DVSLTD]

@@mikeg3774 Thank you for watching!

[@amritpalsinghjag]

Sir can you tell me the whole setup model no.

[@derricklartey7324]

my question to you is that why didnt you maintain the default ip on the nvr but static it.

[@DVSLTD]

I set all of my CCTV devices into my dedicated CCTV Lan , no other reason

[@derricklartey7324]

@@DVSLTD please how did you do the remote view config on your your router(wan) after you have connected the Lan cable from your NVR to your router. please help with me the config

[@DVSLTD]

@@derricklartey7324 Hi , we set connected the CCTV Lan into the Router ( main ) and are able to access this with default Gateway address of the LAN we are using , set in the router, are you in the UK?

[@derricklartey7324]

@@DVSLTD please i get you but can you show pictures...

[@derricklartey7324]

am in Ghana

[@karthiramalingam6903]

How to add mic to an wireless cctv camera

[@jayaramreddy4556]

How much cost Sir Hikvision kit set please

[@Alok_sarkar0311]

Maximum distance it works

[@DVSLTD]

50m

[@ashusingh-ic4tm]

Thanx for the video Could please tell me the model no of this unit

[@DVSLTD]

it’s the NK44W0H-1T-2.8MM kit

[@NISAM14]

OnceI switch from Wifi network to Mobile Internet, How can I view my wifi camera?

[@DVSLTD]

you need to add the NVR to the HIK-connect device as the hik-connect adding method then it will work on both 😊

[@shreyanshjain2609]

Where to buy this???

[@Mhargani]

how far can you setup the cameras?

[@DVSLTD]

up to 50 meters (dependant on environment)

[@dhavebarsalote810]

What is the model of the camera and the NVR?

[@DVSLTD]

NVR is DS-7104NI-K1/W/M & Camera is DS-2CD2041G1-IDW1

[@pradeeppatel3295]

How long distance suppot nvr to camera

[@DVSLTD]

Max 50mtrs , environment will play a big part of this

[@intercomamritsar9311]

I door range ?

[@jadaandavidson9156]

Can they be connected POE?

[@DVSLTD]

Np these are not POE models sorry

[@user-rd1pe3fz7h]

what type of NVR we used to be?

[@DVSLTD]

The WIFI nvr comes inside the kit , you can use a standard NVR and add the wireless cameras to the Wifi Router and then to the NVR by IP address if really needed

[@poshsincebirth898]

link for this kit?

[@kubermehrotra]

What's the model number for this kit?

[@DVSLTD]

NK44W0H-1T-2.8MM

[@preethikour6868]

Will H265+ will support smart light flash

[@DVSLTD]

yes

[@preethikour6868]

@@DVSLTD Model:- DS-2CD3123G0E-IS Sn:- D46376509 will smart light flash work on this model Thank you for replying please reply for this also

[@preethikour6868]

Sir please reply to this

[@dheerajkakade5299]

How much distance NVR or cameras approximately

[@DVSLTD]

Hi and maximum is 50mtrs , realistically , 30mtrs in real world install

[@Gabbtour]

Is this kit used for outdoors?

[@DVSLTD]

Hi, when used in range and correctly then yes , you have to be careful with distances and material in way of transmission path IE steel walls etc , and RF interference in area , but no different to standard WiFi

[@ofmbrusslebelgium8740]

hello good morning i have problèm on installing my camera is asking me to put my user and password how can i get my user and password

[@oghenekaromarvisikpeji4393]

what do i need to do when going far from 50meter.. lets say 150meters.. is it also available for 8 channel

[@DVSLTD]

Best way is wire a router to the location where the cameras are , then add the cameras to the SSID of that router by web browse into the Camera and change the Wi-Fi settings, then wire the router into the LAN port of the NVR or a network with the NVR also on , then add the cameras as IP address then as if by LAN as its using the Wi-Fi on the router instead, that is 1 easy way to do this

[@DVSLTD]

Mark John Hi , yes we do an 8ch NVR but only the 4ch Kit, you can buy the camera’s separate 😀

[@westleymills5203]

Hi what model is this how much does it cost

[@DVSLTD]

NK44W1H-1T-2.8MM. we can't discuss prices over youtube

[@jonthanshort]

How many cameras can I put on this system?

[@DVSLTD]

just 4 on this kit