Adjust Steering Tracking Hustler Raptor Zero Turn

You can adjust the steering tracking on your Hustler Raptor Zero Turn mower. If your mower is tracking to the left or right, you can make this simple adjustment and get it going straight again. All you need is a 1/2" wrench. Thanks for watching!
Wrench set: amzn.to/3Si4Bw5
Other Tools I use in my Shop:
Photo/Video/Audio Equipment I use:
Neewer Ring Light: amzn.to/2ZCCM7R
Canon Rebel SL3 (250D) camera: amzn.to/41FOPko
Canon 55-200mm STM lens: amzn.to/3DG9Qlk
Diety D3 Microphone: amzn.to/3SofWuJ
Tools I use in my shop:
RHINO RAMPS used in the video: amzn.to/3pDcRtD
3-TON FLOOR JACK: amzn.to/3w0JQKx
MITER SAW: DeWalt DWS779S amzn.to/2K7Su5x
PLANER: Porter Cable PC-305TP No Longer Available
Recommended Planer: Delta 22-555 (similar) amzn.to/47mnPHQ
DUST COLLECTOR: JET DC-650 amzn.to/2I4tOZA
BISCUIT JOINER: Porter Cable 557 Plate Joiner amzn.to/2IrCiJj
ROUTERS: Bosch 1617EVSPK 2.25hp amzn.to/41EXqnz
Makita Compact 1-1/4hp Router RT0701C amzn.to/3zZ1Hnk
CORDLESS DRILL and DRIVER: PORTER CABLE: amzn.to/44cSBBP
WELDER: Hobart 500559 Handler 140 MIG Welder amzn.to/2WrCLAe
GRINDER: Delta Power Tools 23-197 8-Inch amzn.to/4azyIJr
DRILL PRESS: ShopFox W1668 Benchtop w/Spindle Sander amzn.to/3l4SxPV
NAIL REMOVER: amzn.to/2XxSmzq
MULTI-TOOL: amzn.to/2Xu3TQl
The above are affiliate links, while they do not cost you any additional money, I do earn a small commission when you use them. thanks!
Dennis Coffey
CoffeyCraftsmanCo.
Hustler Raptor Steering Tracking Adjustment

[@user-dk2cg5kg7f]

Right to the point. No telling us ur life story. Suggesting you take the tire off. Much easier and a time saver .

[@dwcoffey]

Thanks for the view!

[@gafferno1111]

Straight to the point without 20 minutes of blah blah blah. Thanks! attacking this now.

[@dwcoffey]

Thanks for watching, John!

[@gafferno1111]

@@dwcoffey Completed that task with no problems and the machine works perfect. thanks again!

[@derekwhite4290]

Thanks for the video and for being straight to the point. I'll give it a shot.

[@dwcoffey]

Thanks for watching, Derek!

[@billymarkwell1105]

mine has been off-tracking since it was new (5 years ago) I just compensate with the steering controls. I may try and adjust it now that I've watched your video.........thanks for making it.....

[@dwcoffey]

Thanks for watching, Billy!

[@markanthony7479]

Just the solution I was looking for. Much appreciated for the well made video.

[@dwcoffey]

Thank you for watching, Mark!

[@TNGrillinSmokin]

Excellent video. Just what I was looking for. Quick and easy. Fixed my issue. Thanks for posting 👍🏻💯

[@dwcoffey]

Fantastic! Thank you for watching!

[@tonyd3029]

great to see you back. thanks for the video

[@dwcoffey]

Thank you so much, Tony! I appreciate you watching!

[@Jamesbass1968]

Great video and great explanation !! Iappreciate your help!!

[@dwcoffey]

Thanks for watching, James!

[@chrissheffer6823]

Left the mower in the fall tracking to the left, as well. Looking forward to trying this out this weekend! Thanks for the video!

[@dwcoffey]

I hope you were able to get it fixed up. Thanks for watching, Chris!

[@PeterDownie1988]

Hi, Thanks for the video.

[@dwcoffey]

Thank you for watching!

[@HunterNelson-rn7be]

Thanks that helps a lot

[@dwcoffey]

Thanks for watching!

[@wx2833]

I think I have a different issue; when I first start mowing the laterals work as they should but after a while the left lateral has less and less of an effect when trying to turn; any ideas on what might be the cause; I am new to zero turn units and haven't found anything yet that is the cause of this?

[@dwcoffey]

Sounds like the left transmission might need to be bled...may have some air in it. Thank you for watching!

[@rolloff3314]

Great video.. what have you found to be a good air pressure in your tires ?

[@dwcoffey]

Thanks for watching! I'm not a fan of these Big Bite tires to be honest. I have found that I run the rear pressure on the low side. They recommend 8-12 psi. I run mine around 7-8 psi and they seem to do ok.

[@michaelfarris2556]

Well hell I have a cub cadet zt1 50 that is moving to the left. What's the odds so now I'm gonna have to see if this trick works? Thanks for your help.

[@dwcoffey]

I hope it helps! Thanks for watching, Michael!

[@chevyguy1128]

Just bought the same mower

[@dwcoffey]

That's great! Thank you for watching!

[@alexsereika89]

I clipped the side of a tree on the left side and now, when I push arms forward all the way, it vears left some. Still learning this mower and havent check for damage but if there is none, this should fix, right?

[@dwcoffey]

Thank you for watching! As long as nothing was damaged from the hit, yes, this should fix it.

[@skipwilliams7288]

What ever happened to your Husqvarna YTH22. I have one and have watched all your videos on it. Great job!

[@dwcoffey]

Thanks for watching, Skip! It's still in the family, I gave it to my son and he's using it every week. Still going strong. I'll probably continue to make videos about it when it needs work.

[@skipwilliams7288]

@@dwcoffey Thanks for responding. You are a true gentleman.

[@geraldblackburn4883]

I have a Bad Boy, and it tracks to the right so the left is 'faster' ?

[@dwcoffey]

Thanks for watching, Gerald! Well, could be either the left is faster or the right is slower. But, yes, essentially the same issue. You can look at each side and possibly determine where each is in it's adjustment range, then decide from there which side to adjust.

[@trevermccall6762]

👍

[@dwcoffey]

Thanks for watching, Trever!

[@ericwilkes238]

Mine wont go forward are backwards

[@dwcoffey]

Thanks for watching! Your drive belt might be broken.