Stop Adjusting The Action On Your Guitar

[@dexterj5615]

Theres a reason they come with an allen wrench

[@matthewsommerville88]

Yea to stick up your nose, everyone knows this. Best bugger scraper

[@666pinkster]

Right on man it's absolutely ridiculous how much media influences people into thinking that they need stuff or need to do stuff that they don't need to do

[@benjaminlin6524]

This is spot-on. The neck relief is what I always check first. I also like a neck that is almost dead straight. If the relief is how I like it, i know that I won’t have to do much with anything else.

[@johnlloyd9613]

Well done

[@pharmerdavid1432]

Absolutely, setup 101. The best necks I've played are on Shijie S and T type guitars, owner is a luthier with a deep love for those models. Some necks are just wanky, even on old Gibson and Fender guitars, others are totally stable forever.

[@ACE-hv5sw]

I’ve only been playing guitar for 6mos and I’ve already learned to check the neck relief first if action has changed. It was all very intimidating 6mos ago but now it seems basic.

[@electricurinal]

Exactly. I'm a bender and need a bit of relief... 0.010 at the 8th while capo on 1st, and holding down string at last. I have seen that I like the relief to be equal to the gauge the little E string is. Using 10s, its 10... using 9s, its 9. I havent tried it with 8s or 11s... lol. So i dont know if that trend continues tho. Haha.

[@dietersdawgs]

A neck that is almost dead straight the strings will buzz like crazy, the bow in the neck should be the deepest at either the twelfth fret or half the scale length of the guitar.

[@jerseyrednek]

I have to adjust all my guitars relief twice a year. Everything else was adjusted once. Spot on video.

[@cruller23]

This supports the order of operations when checking the setup of a guitar. 1. Chosen string gauge at the chosen pitch. 2. Truss rod adjusted to have chosen relief for #1. After these 2 steps are performed to the desired goal, one can… 3. Start futzing with other adjustments to the saddles/bridge/neck angle/nut height/etc… One has to follow these steps. Jumping ahead to #3 before confirming #1 & #2 is a waste of time and guaranteed frustration. When the neck relief shifts with the seasons, the string pitch changes. For example: it gets dry, the neck bows a little, the string is still straight and level , but the distance between the nut and bridge is now shorter, therefore the strings are now flat. Just giving a little tightening to the truss rod back to the predetermined relief will find the strings back in their desired pitch.

[@HeyNostradamus]

Can you elaborate steps one and two? Or just like, link to an article or video.

[@cruller23]

@@HeyNostradamus There are lots of pages online about setting up a guitar.

[@licccio2133]

😊😊😊😊😊

[@SteveSterlacci]

I just went through this with a new to me Knaggs. I was going crazy chasing intonation and action height and one saddle was maxed out in one direction and wasn't in tune. I wound up adjusting the neck and normalizing the bridge height and it's now perfectly intonation and plays better than ever. Spent 2 days on a 2 minute fix. Thanks for sharing Dylan!

[@465marko]

I knew that it mattered (I guess) but I honestly had no idea that neck relief affected everything *that* much - like, to the point that saddles could be maxed out and STILL the intonation is off. I've had that problem before as well, on my first ever guitar and never would have thought to adjust the truss rod. I was also scared to do it, if I'm honest lol. I was told not to mess around with it!!

[@howardmaryon]

Best. Advice. Ever. I now understand the relationship between intonation and neck relief. Thank you so much.

[@kengoodman7719]

Dude, I live in the Phoenix, AZ area, and my necks have been moving all over the place! I wish I saw this about a week earlier. It has been VERY humid out here lately - unusually so. I did not realize necks could move so much, because here, necks are pretty stable. God Bless!

[@samstewart9249]

Living in the humid southeast you get accustomed to regular tweaks. Carry your tools and gages where you go!

[@leer.2137]

PRS is known for processing their necks to make them more ridged. There's a great factory video in Maryland where they focus on that. If I find the link I'll post it 😊

[@Kazwell111]

I agree, for years I had heard, don't adjust your action via changing your neck relief. Then I watched a highly respected luthier in my town do just that for my vintage LP. He also didn't stick to the commonly echoed technique of turning the tension rod only a quarter turn at a time for days on end. He said you only do that for very old and valuable guitars as a precaution For all guitars, if it is not easily moving then proceed with caution but within reason. You should always be careful not to strip the nut, but in most cases the" quarter turn at a time, wait a day repeat rule" isn't necessary .

[@mspeedm5849]

The key part of your sentence is "if it is not easily moving" because unless the truss rod was never adjusted before, and was slack like it appears it is in this video, with bad action and needed a turn, it will always feel tight even when OK to turn it. It's the same as it will feel when not OK to turn it if it is not lubed occasionally. Dan Earlwine is the best at showing the tricks of the t

[@rickycompton2610]

Great video Dylan, most guitar usually just need a Truss Rod adjustment, especially if you live where you have all 4 seasons, A humidifier is your best friend, ever since a started to run a humidifier in my music room in the winter months I find almost all my guitars need way fewer adjustments.

[@samstewart9249]

Humidifier is a must. I try to keep my room humidity between 45 to 55% relative. Good for those acoustic pianos too! I think some of the higher end (Steinway, Bosendorfer) pianos have humidifiers installed?

[@edwinstovall3334]

I got a Bullfighter neck-through off Amazon recently and fully expected the setup blues. I got it into the house and let it sit for a few days while playing it, then adjusted the truss rod a tad bit to flatten the fretboard. Suudenly, she played like a dream -- did NOTHING else. You just told me why that worked. Thanks!

[@johnboehr5471]

I have a PRS Custom 24 with a torrified maple neck/fingboard. This is an SE model and was made in Korea. I have owned this guiitar for about 5 years or so and have not had to adjust the neck until just last week. Incredible.

[@Mountainrock70]

My Gibson Les Paul didn’t need adjustment until its 5 year either during a very dry spell.

[@Wolf_K]

My Fenders never need an adjustment after I’ve set it to what I like initially. The weather affects them so little it’s within tolerance of my preference. My Gibsons have needed adjustments far more but certainly not excessive.

[@markn4526]

Very good point about wood quality and stability. I have a 1998 PRS McCarty Model that I bought new in 1998 which is an excellent guitar. I remember doing the initial set-up after having it home for a while and I cannot recall doing any kind of adjustments to it since then. It is the most stable guitar I've ever owned. Gibson USA guitars almost always need 2 neck relief adjustments per year. Gibson Custom Shop guitars rarely ever need a neck relief adjustment. This is after the initial set-up, of course. Better Fender guitars' necks are usually pretty stable because they are maple. I've found most maple necks to be more stable than most mahogany necks.

[@kristopherk5454]

Dylan, I have a Heritage H-575 from 2005 that has not once needed a neck adjustment or re-setup. Super high-quality woods.

[@TheFRiNgEguitars]

spot on! In some cases, the strings can slightly oxidize, which also changes intonation. Used strings as well will change intonation. In both instances, simply change the strings with the same gauge and brand!

[@samstewart9249]

Bull, even Joe Walsh's perfect pitch ear won't detect the small frequency change caused by surface corrosion. If so you could just tune by wiping the syrings clean. I personally set my string heights to my playing. The length between nut and bridge determines intonation. Over 60 years on the guitar. No a novice needs to learn how to fine adjust their instruments to them and their playing. Make it personal to you. I'll bet Gilmore does, and Knopfler, Gary Moore, et. al. many others. Bet none of them tossed those allen wrenches, Gibson truss nut tools or other things that let them personalize their instruments and style.

[@graphicartdude]

One thing I don’t understand is why you wouldn’t be checking the neck relief with the guitar in side position rather than on its back. Reason being, you play your guitar in side position (not on its back). The position does seem to affect the amount of relief (at least that’s what I’ve found). So while your method is giving you a level neck reading with the guitar on its back, it’s likely going to be slightly off when you turn it on its side (playing position). Curious your thoughts on this. Thanks.

[@DylanTalksTone]

Because it’s hard to shoot it that way

[@graphicartdude]

@@DylanTalksTone Understood… thanks for the reply. So would you recommend making relief adjustments with a guitar on its side? And should setting intonation also be done this way?

[@lawrenceglenn7162]

Great info; Much appreciated! As a guitar player that suffers from GAD(guitar acquisition disorder), i know what it’s like to play a guitar after it's sat in the case a while. First thing i do after i free it from the case is….nothing! I let it acclimate for a day or two out in the open before i adjust anything. Sometimes they settle back all by themselves. If there is an adjustment, you’re spot on…. It’s usually a minor neck relief tweak. Thanks for your video! -LA

[@curtisnorris868]

I can't eyeball 1/100th of an inch so what I do is capo the first fret and fret the low E at around the 16th fret. Then adjust the neck relief while tapping the string at the 8th fret. No relief or convex you won't hear the string tap on the fret. I just adjust it untill I get the slightest tap so the neck will be as straight as it can be but still have a tiny bit of relief.

[@livefromadive6751]

A great point in this video. Thanks for making it. As neck relief changes you may also hear a difference as the strings move away from the pickups. I have also found that bridges don't move, except, for Fender offset style bridges. The string down force on the two screws takes its toll over time. I have found multiple Squier Jazzmasters and Jaguars that strings hitting pickups just from hanging on a guitar shop wall too long. Locktite can help fight this

[@Youtubemademeaddahandle]

I have discovered that the same neck relief (after confirming the minimal string clearance at the third fret) used as a basis for the same string height (regardless of sting scale length or even diameter of strings) leaves only the need for intonation adjustment. Once all that is done once, the neck bow is the major variable subject to environmental conditions. Returning the "action' to my "feel" is done without gauges. That way I only need to carry the correct tool for that adjustment on the guitars taken to the gig. Each tool is labeled to correlate with however many guitars it fits.

[@roberthelpus]

One thing that you didn't mention: The truss rod will respond instantly to adjustment but the wood will not. That is why I always adjust less than is needed and wait a few days to see how things settle. Especially when loosening the truss rod. One would think that a more stable wood would take longer to react. Here's a story. An old house where one end had sunk down a good few inches. We put posts with screw jacks in the basement. Fortunately, we talked to an old hand that explained that it took a hundred years for that structure to sag like that and that we weren't going to restore its height in a day. So once a week, or whatever, we would give the jack screws a few turns, and eventually that old hard pine was restored back to level.

[@copperaudio9664]

The wood on cheaper guitars isn't dried as long as expensive guitars before shaping and so they change as they dry. In my experience, after two years they are as stable as any and if not, get rid of them. I think necks get blamed for cheap tuner instability as well. I put Gotoh locking tuners on everything. Every string is has the exact same temperature drift in tuning on hot days. That's the strings changing length, not the neck. Good stuff Dylan - thanks!

[@dlmyrs]

I agree with that, but I exclude Gibson Nashville from that I think that’s why they have so many QC issues. I love my Gibson guitars, but I think they’re more in to cost savings

[@sunn_bass]

@@dlmyrs KKR owns Gibson. And is only concerned about investment returns. Cost cutting and revenue increases are a must to meet their WACC, ROIC and EBITDA measurements. And while all companies are concerned about earnings and cash flow, PE's are a lot more aggressive and cutthroat about it. Large PE's have the clout of large public companies but far less oversight. I'm speaking with experience as I have to deal with these types daily.

[@onlyusernameleft2]

this must be why the low e on my new MiM strat started buzzing at every fret after 2 hot days lol

[@Bigboybooya666]

Locking tuners aren't for tuning stability. It's for string changes

[@JohnAdams-xc5yk]

It only takes 15 days to dry most woods

[@sunn_bass]

When I buy a guitar (new or used), I generally restring it and do an initial setup. I might try a couple different gauges the first few re-stings and tweak the setup if needed for the different gauge and string type. After that, I do the usually string changes and seasonal truss rod adjustments if needed. I rarely swap parts. I look at a guitar as either I like it as is or not. That applies to my Squiers, Fenders, etc. I've seen too many folks spend more on parts than the initial guitar which is ok it that's your thing, it's just not mine. The story is different on guitars/basses that I build from either parts or raw wood. That is where I experiment and spend my time experimenting.

[@steveg.3022]

Pretty much the same for me except I only have Squiers, no Fenders. And I’ve never built a guitar, not even a kit. Agree about parts replacement. I usually only replace parts that have failed. (Squier Strat 5-way switch was begging to be replaced by the proper Fender part. When one of the pickups “stopped working” that switch was outta there!) My Squier Classic Vibes haven’t needed setup adjustments since I first did them.

[@sunn_bass]

@@steveg.3022 I love my Squiers. The Classic Vibes are great. The Paranormal series are my favorites because Fender seems to have fun with that series doing more non-traditional things with it. I actually play my Squiers the most.

[@ldfox11]

Neck relief is my issue. Low humidity in the summer, high in the winter. Once or twice a year, a small neck relief adjustment is required on a few of my guitars. Once I setup a guitar, other adjustments are almost never necessary.

[@ldfox11]

Here in the Central Valley of California, we get high humidity sometimes in the summer if clouds come to us through Arizona from the Golf of Mexico in the summer. But mostly we have dry heat. If I use the heater in the house in the winter, it dries out the air, but I run a humidifier. I’m don’t run the humidifier in the summer because I can’t stand it.

[@doctorscoot]

Aaahhh, yep! I tune my guitar, check the intonation, and then play it. The only time I’ve ever had an issue with set up after initially done was when I put a completely different gauge of strings on it. And mainly it was neck relief because of different tension (and I probably should have done the nut slots but 🤷‍♀️). Great video. Just play the damn thing.

[@gorgon9786]

Yeah,. Heard about a violin player who told his violin had suddenly a bad crap sound in it..well, the answer was he didn't play his instrument enough! A unhappy instrument sound...

[@joecool5670]

I had this experience once a while. A pefect Intonation as i got my Guitar, a month or two later, Action too high, Intonation gone, another Month later perfect... Now i know why, cheers. And about Epiphone and Gibson: I own a Epiphone, actually 2 Epiphones and my Mate owns a Gibson Les Paul, well...it is a complete different Story with the Gibson, you can feel the difference and if i ever get enough money i will try to get an really old Gibson.

[@Scooter110]

A major factor with requiring relief adjustment is humidity and the control of. A guitar stored in a case with silica gell vs gig bag will resist change much more and a gig bag is better than hanging a guitar on the wall or leaving on a stand. Where I'm from we have cold winters so the heater is on producing dry air. In the summer it's hot and very dry and we use evaporative air conditioning which produces humid air. (90% rel humidity). If a guitar is left out this causes absolute havoc with neck relief as the air conditioner is turned on and off depending on the day. If a guitar is left out it may require relief adjustment on a weekly basis in the summer. The first time i noticed this i thought that there was something badly wrong with the guitar .(bass) Once i stored the bass in a case, no problem. I always store mine in cases as it creates a micro climate but the relief will still vary quite a bit from season to season. I also wipe the strings and guitar down after use to remove any excess moisture.

[@telecasterbear]

A quarter sawn neck never needed re-adjusting in southern new england. A flat sawn neck on my fenders needed a spring and a fall adjustment.

[@renmad0078]

Totaly agree it's always the neck with humidity who moves. Very good video 👍😉

[@VincentPeer]

I did, in fact, wear out nickel frets on a guitar. I played probably 3-5 hrs every day for a good 5 years. Some days I definitely got more than 5 hours. And I noticed after about 5 years I could see 6 indentations in most of the frets (right where the strings sit). I could feel them too.

[@markpell8979]

Vincent, let's take your low figure of 3hrs a day. Every day for 5yrs, that's nearly 1,100hrs a year or the equivalent of 2-1/2 to 3yrs at a full-time job. This is not unusual for a dedicated, enthusiastic musician (or whatever) to become just a journeyman at our craft. And less than half of what 'masters' have spent to be playing at an expert or professional level. To beginners reading this, guitar is a way of life. It may not be for you, or maybe you're not trying to be among the best. Even if it's just for fun, it always makes you better to practice and jam and challenge yourself. Don't get too frustrated, put in the time and work, and realize you can ALWAYS get better. And realize nobody ever really masters anything.

[@VincentPeer]

@@markpell8979 bro, playing guitar is my only job. I’ve definitely played more hours than most players ever will. I was talking about one guitar that I played 3-5 hrs. a day. I’ve got guitars that I wore the finish off the neck. I’m 40 now. But, back in high school, when teachers couldn’t think of my name, they called me “guitar.” I’d say I’m an expert and a professional.

[@markpell8979]

@@VincentPeer oh man, hope you got that I was respecting your dedication and saying it's a good example!

[@VincentPeer]

@@markpell8979 oops! I did not. I’m more used to the cesspool side of the internet. My apologies.

[@markpell8979]

@@VincentPeer No sweat, no apology needed. After summarizing the math and rounding down to be conservative, I was kinda saying to beginners, "Here's what it takes if you're serious about becoming a real musician. If you're really not, have fun with it but don't expect to get good without doing the work." I also see now you were talking about playing just one guitar that much. You're right, most people never play enough in a lifetime to wear out even one guitar. Btw I think a naturally work-worn guitar is beautiful, and fake relics are a kind of 'stolen valor.'

[@mysticmusic6045]

Thanks for that. Over the years it has become clear that the straighter the neck the better. A little relief actually robs string energy because it it pulling against a bowed piece of wood, not a straight pillar that has no flex. Guitars actually ring out better when the neck is straight. If a guitar needs relief, it probably needs fret work.

[@nestorprieto3023]

The title is provocative, so l was ready to rage-watch the video. But this is spot on. Every adjustment you make on a guitar is important, but neck relief and pick up height are, in my opinion, the two most important when it comes to being a happy camper.

[@DylanTalksTone]

Glad you liked it!

[@robbiedaug]

i have a '91 USA Stratocaster Ultra Plus with a maple neck, an ebony fingerboard, and a Wilkinson roller nut. Apparently, there are three different-sized Wilkinson types for, i think three, different string gauges (so i've heard) and i am not sure which one i have on this Strat. I bought it 2nd hand in December 2023 and it played like a dream until recently. It seems to have an. 08 high E string. I normally use .09 high E strings on my other guitars so i am estimating it was strung with a set of .08s. My issue with the '91 Strat is the B string started buzzing when played open and on the 1st and 2nd frets. . About a month ago, my high E string did the same thing around the 5th fret and i didn't know what to do, so i detuned the one string and raised the action a few times and on the last attempt, the string snapped. So, i installed a new .08 high E and re-tuned the string and it was okay. I even had to lower the high E saddle to where it was before the buzzing started. And now the B string is buzzing on the 1st and open. The only tool i have purchased is a string action ruler but i don't know how to use it yet. Standing in front of the headstock and looking down the neck towards the guitar body, would i need to turn the truss rod to my left (to increase the bow) or to my right (to decrease the bow) to fix this problem? All the other frets are fine. Or maybe i should just change the B string? I don't want to waste the string if it's still good though so I'm trying to leave a string change as my last option. I have already tried raising the B saddle and it doesn't do much to remove the buzz at the nut and "1st' frets, and the B-string's height is getting too high. Any advice on how to solve this buzz? Thanks...to anyone.

[@j6nighttrain]

Look up reseating frets. Changes in humidity can push frets out of the fingerboard.

[@robbiedaug]

@@j6nighttrain Good tip. Thanks, i just saw a video, and there is no rocking and the fret is not loose. It's seated well.

[@eddiejr540]

Dylan…I’ve been guilty of grabbing wrenches and hogging away until I’m so deep in the weeds I can’t get out…but I learned my lesson 👍

[@samstewart9249]

Well some have it and some don't! Dylan was a songwriting God not a Guitar God!

[@marlintaylor2687]

This kind of advice is GOLDEN, & it's something that you learn from experience - the NECK it the keystone of so many other factors, & super easy to change! What I've seen is that most folks are scared to turn the truss rod, but there's NO REASON not to. When they end up takin' it to "a setup guy", what's gonna be the FIRST THING he looks at?!?! NECK BOW/FRET BUZZ. EVERYTIME. 9 times outta 10, that's the only real issue, & once THAT'S back to where it should be, like MAGIC - the other variables "right themselves" too! 🤘😁🤘

[@NickDevXT]

I actually just adjusted my relief yesterday, funny this video comes up. The queues I got were the action coming up a little, slight intonation drift, and strings starting to fret out towards the middle of the board. Checked the relief and sure enough it was a little too high. Little bump to flatten it out and it fixed EVERYTHING!

[@scozz6139]

I do all my own setups including some other stuff, fret leveling for one. I own a 1974 Guild D35 Dreadnaught that I bought new in 1975 when I was 19 years old, in those days all Guild guitars were made in the USA in Westerly RI,....... ..........and I have never had it set up since I bought it almost 50 years ago! I don't play it much, I play my electrics almost exclusively these days, but I took it out just yesterday to play, because the power went out and I had nothing to do,..... and t's still perfect, it's almost completely unbelievable!

[@AnWe79]

Yep, you can think of the neck/body combo as a bow (as in bow and arrow). If the bow part expands/contracts (straightens/bends), or the tension of the string changes, the distance between the string and the bow has to change correspondingly. Adjusting the truss rod just lets the bow-part bend less/more. The tuning of the strings is like when you draw the bow's string, just more or less permanent. So if your guitar has gone flat while sitting, you likely need to tighten the truss rod. If it's gone sharp, you probably need to loosen it.

[@jimcamp2423]

I'm in humid Central FL, same thing for environment, set it up once, seasons change, check it periodically to see where it may have moved. These are $ 100 new & preowned Inconesian/Chinese guitars. This is over 5 years (2019-present) of same guitar ownership for the Epiphone LP Soecial & Squier Strats. My Telecaster are 2021's, so they are 3 years old new Monoprice guitars. Same thing, they don't move enough that tuning the strings doesn't cure. What do I think is responsible for his stability ? The HVAC system for cooling & heating the house is that accurate & good for regulating the interior humidity & temperature. That as stable and there is minimal expansion & contraction. I also oil the fretboards as necessary and that keeps the fretboard form drying out/dehydrating. Any set up adjustments I'd make, that's because what I thought may have been perfect, probably weren't, maybe I'd like to try the neck relief, string action or saddle heights a little lower or even higher. To date, I've never had to adjust the nut slot depths, and these are nothing special $ 100 Chinese guitars. I can't have gotten the only perfectly cut nut slots from China ? They did a fine job on the production line at the factory or wherever the set up for nut slots happened, and it's the rest of my set up that has to be tweaked to work with the original set up.

[@dw7704]

Definitely the wood quality matters I rarely have to do adjustments, so even my cheaper ones seem to be well made. It’s been years since I needed to do that, other than a guitar I swapped out the bridge on. (So of course I had to set the intonation and action, but I took measurements.) Years ago looking for a fretless bass I kept seeing some cheaper models that all had serious neck bow. This was at different times of year, different cities, different stores. At one store they told me they kept adjusting them, but they kept bowing. Guess what I didn’t buy? Yet one guy who did buy one was getting all worked up, and taking it personally whenever anybody pointed out that flaw. I guess he likes doing adjustments. Oh well, that’s his choice. The fretless I do own is the instrument that I spent the most on, and the neck’s been great.

[@splodgefpv5927]

My strat lives in my van as i practice on my work breaks here in the UK, I lost a few weeks leaning to play as it wasnt set up when I got it but did gain leaning set up skills, I've had to go for a standard set up and action and just go with the day to day changes. Nothing worse than fret buzz in a van so the action can't be low. I've also fitted a zero glide zero fret nut because my nut was cut to low, this seems to help with intonation.

[@mikesnyder4287]

Yes, the wood moves definitely. Do strings lose tension over time?

[@DylanTalksTone]

When you tune the guitar the strings have the original tension…. Otherwise they would be out of tune

[@Chucksguitargeekery]

I have some guitars that I just keep the truss rod covers off of.

[@Gr8FriknApe]

I love it ... "don't touch it" and then proceeds to do a set up. I like "Epies" because, with some TLC, you can make them sound better than their 5 x(s) the quality priced brothers. My latest guitar purchase needed tweaking in the relief, string height and intonation. I like a flat neck and low string height. My adjustments were correct and it now sounds better than its pricey Gibson brother hanging on the wall. That said, you do get more weight when you buy lower quality (chuckles). Awesome video.

[@scottharringtonSR]

Living in the northeast US with cold dry winters and hot humid summers I run humidifiers and dehumidifiers in the room where my guitars stay. Even with that I still get a difference of 20% from the lowest in the winter to the highest in the summer with occasional larger swings on extreme days. With a collection in the neighborhood of +/- 2 dozen I find that once I have them set up I don't really have to do anything to them. Even seasonal changes don't seem to make a difference. Once every few years I might have to give one truss rod a small adjustment. The only time I have to mess with the hardware is if I take all the strings off and manage to bump something out of place.

[@soylentkris]

You are correct. The only thing that can change itself is neck flatness... not action, not pickup height (though I did have an old guitar that would lower the bridge pickup on the bass side, due to sympathetic vibration).But, I find myself tweaking intonation on practically every string change. Typically on the B & G strings. I think that tolerances in manufacturing create this delta, even to the point that I have had brand new strings that were wildly out of tune... only to mount a new string to find the problem eliminated. Granted, I play a lot of upper register triads (with extensions) while using the lowest note I can find in that neighborhood. The upper register stuff really reveals and sharpness or flatness, because the frequencies are very close together, but also, high enough that you can hear the 'beating' between non-consonant intervals ( I didn't say dissonant, because a M3 isn't dissonant... unless out of tune.). Otherwise, great video. I had some guitars that used to punish me if I left them in the case... high action, or buzzing everywhere.... My response was to let them go. WIth all the gigs and sessions, and a family.... I don't want to console my guitar.... Kind of like a carpenter consoling his hammer.

[@ps-bi2sr]

Thank you Dylan - you've illuminated some great points for a guy who's been playing for 50 years....now subscribed too!

[@ChrisEck13]

I can't stop making adjustments on my guitars. I don't even want to, I just can't help it. I constantly adjust the relief, the bridge height, and especially the pickup height. I drive myself absolutely crazy. Even when a guitar is playing well, I get this thought in my head that I can get it a little better and then it changes the distance of the strings from the pickup and then I gotta mess with the pickup height for far longer than I should.

[@shawnawesome7770]

Yes 💯

[@pastorofmuppets1968]

Same here. I'm always thinking, if I tweek it just a tad more.

[@ACE-hv5sw]

Lol…that’s how I learned to make all the adjustments so I do it just to keep it fresh in my head. I’m always checking and tweaking but should probably worry more about getting better at playing it.

[@JE-western-rider]

This sounds like me. Is there Obsessive complusive behavior involved by any chance?

[@StratMatt777]

@@JE-western-rider A little OCD probably..... plus most people don't realize that they can only find their perfect dream sound by changing SPEAKERS. Nobody changes speakers- and they make the biggest tonal change.

[@craighamley3669]

If the guitar has been in a case for weeks, when it's usually out of its case, I don't even bother to check the neck relief, or any of the possible adjustments, until it's been out of the case for 24-48 hours.

[@peterknicked]

You are 100% correct. Always start with the relief.

[@sunn_bass]

Great video and you nailed the subject well. I do have to say that unstable hardware is not limited to inexpensive guitars though. Rickenbacker used an unstable bridge on the 400x bass series from 1961 thru 2019. Those were notorious for the back of the bridge lifting (bending) up. I'd say that at least 1 out of 4 Rick's that I have seen over the years showed either minor to serious lifting which is not only cosmetic, but must be replaced as the lifted bridge does not have enough break angle . Just a horrible design and made of a zinc/pot metal alloy. They kept that design around for tradition sake only. That bridge did look cool though. There are a few other high end brands that have used inferior hardware too.

[@dmytrogarastovych7684]

Totally agree. Simply don't do what you don't have to do. Always follow this instruction and you'll be good:: T - tune R - relief A -action I -intonation N -noodle

[@glennmichaelthompson4112]

Absolutely agree with you. Ninety percent of the time it's just a truss rod adjustment and I'm good to go. Sometimes I've found that I can simply play a guitar again for a short while and it'll settle/vibrate back into playing shape. Taking it out of the case and getting the wood used to vibrating and being played again... (could it be placebo effect?)

[@ericcoombs]

After you adjust the truss rod shouldn't you let the guitar sit maybe overnight for the wood in the neck to pull back?

[@kaoe145]

That’s what I do. I usually set it to have the slightest buzz, than after a few days the buzz is gone.

[@CQJR007]

Plain and simple advice. That is what knowledgeable and honest people give. I thank you for that.

[@b.j.taylor9576]

Very practical and good. Good point on the stability issue. Most players probably don't consider that!

[@michaelhargreaves8643]

Thanks Dylan! I was just about to do all the things you said not to do (again), tweaked the truss rod instead. Sorted action and intonation in one go, champion.

[@buck7477]

I’ve noticed some times The truss Rod will not loosen on older guitars it will only tighten or straighten the neck. I Have a couple of 80s Ibanez Roadstars and the truss rods will turn but will not give any more relief they will only tighten. But the necks on these guitars are almost perfectly straight. I just put 10s on for a while then I can go back to 9s eventually. I’m guessing the wood in these necks have muscle memory.

[@peters6589]

This is good info. IMO, the first thing I would do to a guitar that hasn't been played in 6 months or more is to change the strings. Strings lose tension and get worn over time so that affects intonation. This shouldn't affect the action as that is caused by humidity changes primarily as mentioned in this video. But again, starting with fresh strings is the best first step to setting up a guitar if the strings havent been changed in a long time.

[@giulioluzzardi7632]

Right-on. If any-one knows how-to it is you Dylan. Now, I have a 335 with P90 dogears( yes 335). It is a custim shop and it sounds fantastic un-plugged, is there a way to get closer to a Humbucking bridge tone without putting a new pixkup in, like maybe stuffung the cavity under the pickup with some-thing( metal, wood, rubber)? Thankyou.

[@moustachio334]

An EQ pedal

[@tommurrayGTR]

I always go straight to the truss rod, I rarely adjust the action at the saddles. If anything I'm a little too trigger happy with the neck adjustments, but I really like play my neck with an exact relief and when it changes it's the only thing I can think about when playing. It's a slippery slope.

[@RomeoG39]

Thank you, Dylan. I have always struggled with guitar setup and things like neck relief. I don't know why it's so hard for me, but this video helped me.

[@johnfisher2206]

I believe when the action is too high the strings are bent too much so they go sharp.

[@Sunke89]

Shouldn't you lower the string tension before adding tension to the truss rod? I believe I read that somewhere. Great video thanks for the info, I totally agree

[@rccarsandmusic2641]

Depends where you live, living in New York with wild temperature variations I stay on top of neck adjustment as they change with humidity. I have 3 guitars in los Angeles that I play every 6 months and are always good.

[@robertolsen9721]

I intonated my 2 guitars during winter, they're still ok. It's kind of a struggle with the premium Ibanez Jem because it doesn't have intonation screws.

[@NeuroplasticityReprogram]

Excellent, comprehensive explanation of precisely why. Thank you for sharing your wisdom & energy.-All the Best!

[@oldrrocr]

thanks for this maestro! at 11:20, I'm with you about my PRS guitar, it has been THE benchmark for all my other guitars. (Arrived perfectly set up*, and remains so).

[@pyratoothNL]

I'm always surprised some of mine drift a little and others are solid as a rock and we don't have anywhere as much issues with humidity as you guys. Big argument for roasted necks to get all those pockets of moisture out before the build.

[@mickthebandit]

100% correct. The truss rod is the first and sometimes the only thing to adjust

[@MichaelSorensen-bl3ec]

Temperature definitely affects the guitar. I've found that if I tune the guitar when the weather is warm, say about 25C, and then pick it up to play when the weather is cooler, say 8C, it will be very sharp.

[@stancoleshill8925]

All what you say makes sense because the only thing that changes is the humidity and I experience this every winter with forced air heating about 5 months of the year.

[@CaesarCapone]

Where should you place a capo? I've always placed it closer to the fret wire, but seeing where Mr. Dylan places it, and depending on the pressure it applies, I'm thinking I may be pushing sharp. What do you all recommend?

[@clemmcguinness1087]

I always teach my students: Kaa poh In the mid dull Stays in tune

[@richardclark.]

I would recommend checking your tuning after you add the capo and then giving a push or a pull where needed. Especially if playing with other players or a track.

[@hakanaxlund4316]

Great video and spot on. Hope that a lot of guitar playing people out there can learn from this.

[@belmontbutty4143]

To paraphrase Tom Sizemore in Heat: "What if the fiddling is the juice?"

[@JM-bg2ts]

This makes so much sense, i think subconsciously I put truss rod last on my adjustment priorities because of warnings about doing damage to it. But now i know what im doing this is going to be my starting point. Cheers 🍻

[@sgholt]

Get a string height gauge and the hex wrench to adjust the truss rod a 1/4 turn at a time...check saddle heights as well... and use a room humidifier in the dry months... and finally entonation....the essential setup process....fret files and a crowning file would also be good.

[@czarofzonk1360]

Due to onset of arthritis , I set the action as low as possible. I know when it's right. My compositions are such that I use all strings and all frets, so I have no intention of filing. Yes, I adjust the neck first. That said, double acting truss rods are resilient. As for intonation, I hesitate to make adjustments unless necessary. I use the trem, frequent finger bends, as well as playing slide, so my ears are active in the playing process. I have guitars in rotation, but I practice 3 hours per day (I'm on my second 10k hours) on the same guitar until the recording is done (audio and video). I have 7 years of content on my channel -- instrumental original compositions (no vocals, since no one has anything to say in the first place).

[@davidmultimedia2024]

Your main point is 100% true. It always kills me to see people making adjustments anywhere else than the truss rod when the guitar has changed.. just like it kills me to see people spot leveling the frets on their brand new guitar before even making sure the neck is perfectly flat. I see them toying with their fret rocker tool all over the neck as soon as they hear a fret buzz.. it's ridiculous. That said, you should never adjust a truss rod that much in one shot. You turn around 1/4 of a turn, then wait for the wood to stabilize. You then come back ''at least'' a few hours later (ideally 24h) and realize it continued to react while you were gone. Then, you can go on and give it another 1/4 turn if required. In ''some'' cases, the neck won't change while you're gone, but ''most of the time'' it does. Truss rod gives tension, but the wood doesn't release it completely as soon as you turn it.. so measuring the result right after adjustment is unreliable. This isn't my opinion, but a basic, well-established fact that I experienced myself many many times on all guitars I owned over 23 years of guitar obsession (ranging from 500$ to 4000$). This is even more important on roasted maple necks, since roasted woods are a lot more prone to crack because of the lack of humidity in the wood.

[@cironicholas526]

I used to adjust my trust rod every time i picked up my guitar because I used to be into completely flat fretboards with lowest possible action.... I'm so glad I'm out of that habit.

[@JayceAllanGuitar]

When I get a guitar I check the intonation and string height, and set them to my liking, then...rarely touch it again. I've also almost never had to adjust the truss rod in any guitar I've owned (after my first setup that is, I've had to adjust a few used guitars once). I've had tuning go in and out due to humidity, but never neck relief. I mean there's a steel rod running through the middle of the neck, so it shouldn't go anywhere, unless it's extremely dried out. I also keep all my guitars hanging on the wall and in a humidified room. The only issues I've ever had with guitars is by leaving them in the case, and that was an acoustic and the top cracked (too dry). So I keep everything out in the open to allow the humidifier to do it's work.

[@shayneswenson]

I used to be “meh” about your channel but it’s slowly become one of my favorite guitar channels. ❤

[@DylanTalksTone]

same!!!!!

[@pedrocora471]

make sense! thamk you, never thought about it in that way, just be a bit confuse what to do first, try it in the bridge nut height, etc, specially about intonation more than distant between string and neck. Sometimes is not easy get to easier facts :) so helpful!

[@johnosborne3187]

that just happened to me. I wanted to cut out a guitar to allow me to back load pickups to test new ones that make. I picked a guitar I made years ago that I hadn't used in quite a while. I finished and got the first pickup installed, and realized that it moved over the time I hadn't used it. It just took a quick neck adjustment to get it perfect.

[@johncleghorn4656]

Excellent teaching and coaching! Thank you for the guitar wisdom!

[@465marko]

Oh man, I'm 100% guilty of reaching for the tiny wrench first, or the screwdriver. I know, I know... I've always heard you're supposed to adjust the truss first. But I took that to mean: do it first because it'll mess everything else up if you do it last. And usually I'm not planning on doing it anyway. So, I was admittedly skeptical of where this was going, but this cleared a lot up for me, honestly. (In fairness, I've also been experimenting with higher/lower action because I still can't decide what I need and prefer). But generally speaking, I'm going to make a point of checking the relief with a string before doing anything else (not just eyeballing it down the neck - I don't think that helps very much, tbh). Thanks for the video. Makes a lot of sense.

[@czukone]

You just saved me trying to do a fret level on my strat. Half a turn of the truss rod an it's playing sweet. Thank you. +1 subscriber ;)

[@tommyausburn]

Really good info here. Thanks for simplifying things!

[@tvenar]

The drying of the wood is a huge factor, among others (as you allude to) and one of the reasons PRS and others, pay attention to this. But the cost of the guitar won't always guarantee it. I have 2005 Fender American Deluxe Strat that had a tremendous problem with fret sprout. If the fretboard had been dried properly and the humidity in the manufacturing environment had been right, the issue likely would not have occurred. It took me several years before the guitar aged into a better situation, as well as some pretty intense fret end work, through multiple seasons. At the time I bought it, this was the top of the production line guitar and pricey. Because of the sprout issue, I got the guitar at about 50% it's retail value (at the time, I would not have been able to afford it otherwise).

[@GabrielSkolderblad]

That's what I do to.. I only check my intonation when changing strings after adjusting my neck relief. It's just strange that some of your strings are intonated and some are not.. It would make more sense if all are bad intonated if the neck relief is changed unless the neck is somewhat twisted.

[@Tonetwisters]

I live in north Florida. The temperature and the humidity changes almost constantly. I'm always having to tweak it a bit here and there. Been playing 62+ years, so I have to work on it a bit. Otherwise it will drive me crazy.

[@YaYousef5]

Consider buying a humidifier which will keep the room at the same humidity year round and will reduce or eliminate the need to adjust your guitars so frequently.

[@CPellman]

Thank you. Someone actually has the knowledge and skills with guitars. Dude, you ROCK.

[@uhoh007]

What you do not mention: it's the desert climates where all guitars can change. Ask Bukovac about Las Vegas. Your "truss rod first" is what I've also learned to do......"nut last" also seems a reasonable rule. Damp sock in a baggie, or damp shirt in the closet seems to work fine also, with my gear after years of experimentation in high desert. I suspect that PRS might have need more tweaks with more play.

[@Joe-mz6dc]

It's not just the desert. It's changes in humidity. The Pacific Northwest is a good case in point. It gets extremely dry in the summer and then extremely wet in the winter. It's the change in humidity. Not a particular location.

[@tonepilot]

I don't worry about setup too much after I've checked it out when I first get it. I do however, try to avoid nickel frets. I DO wear out frets on guitars quite quickly. I find Fender frets are the softest. I've had to go to stainless on almost all my Fenders after the first year of playing them. Good tips though, very helpful as usual.

[@Zhaggysfaction]

I'd say the why the intonation is off when the neck relief is not correct is not due to the difference in the scale lenght caused by the bow on the neck but rather, as seen, the strings are higher so to when checking the intonation you have to fret the string much deeper so it goes sharp.´becasue you sort of micro bend it to get to the fret.

[@salsplace]

I rarely touch the truss rod on my Gibson Les Paul standard. When I had my Epiphone Sheraton, although it sounded good, had to adjust the truss rod every 3 months or so.

[@Polyphemus.]

I'm lucky enough to live in Sydney, with relatively stable humidity throughout the year, usually between 50-60% year-round. I never have to adjust anything on my guitars. I just keep the same gauge on them and store them in their cases. I've got guitars I haven't had to tweak in 20 years.

[@glenh2752]

As long as my guitars are well intonated, have no dead spots or fret buzz, I never bother adjusting the action. Some of my guitars have much lower actions than others. I think it’s good to play with different string heights anyway, adds to the variety and means if someone just hands you a random guitar with any old setup, you’ll feel at home playing it 😃

[@samstewart9249]

If they are well intonated, without dead spots or fret buzz you can bet someone has adjusted the action at some point, even its a factory set up.

[@TaahaAhmed]

Great video! Amusingly, at times I pick up a guitar that has been stored away and part of me feels that due to changes in playing style and tastes, I may readjust a guitar's setup.