Dyna Hard saddlebag install Turn your dyna into a touring bike

Рет қаралды 10,197

Күн бұрын

Пікірлер: 18

@jamespolucha8790 Жыл бұрын

Thanks for the video, I can’t find a kit for 2006 dyna, I can find for a 2008 so I thought I would just get that and cut and weld to make it fit

@briansondgeroth9674 4 ай бұрын

I'm surprised that you didn't start that carpet on fire grinding and throwing sparks on it. The bags look good. Thanks for the video. I may have trouble with my '04 Dyna. I have screaming Eagle dual exhaust on it and I'm not sure the bags will fit on it. But, I'm certainly going to try.

@alaskagarage 3 ай бұрын

@@briansondgeroth9674 lol no fires 🔥

@dcater100 3 ай бұрын

Really thankful for your video, helpt me very much. Thanks 👍 regards from Holland

@alaskagarage 3 ай бұрын

@dcater100 my pleasure glad it was able help someone out

@SB4me 2 жыл бұрын

Nice job.

@alaskagarage 2 жыл бұрын

Thank you

@wanaraz Жыл бұрын

Clean bike!

@alaskagarage Жыл бұрын

thank you

@tillmanfamilyfarm7759 5 ай бұрын

How did the rear blinkers turn out? Do they fit back in there?

@jonniemayhem 2 ай бұрын

Amazing job but looks like sht brotha 😂. Don't worry I went thru the exact same thing. What you do now is find a used road glide rear fender & taillight on ebay or somethin, then drill & mount it . Make sure to set it a little further back, don't worry if you see some empty space underneath your seat between where the road glide fender ends and your frame begins. RG rear fenders don't go all the way up like the dyna ones do. If you're handy with that welder you can cut out what you need from your dyna fender and weld it onto your new RG fender. I Didn't wanna wait or have to paint so I didn't and bc of that there empty in front of the rear shocks u can actually see thru to the other side but it's not as noticeable or awkward as having long bag with short rear fender. The tradeoff was absolutely worth it. I had to get some of those fancy all in one led tailights/ turn signal /stop that twist right into your bulbs sockets. The wiring is well hidden and works with your stock circuit board just bolt it into the inside of the rear fender. U can also new tri bar taillight that may or may not come w the rear fender you got but u can easily order one. If u really wanna look clean u can get a cvo rg fender as they've got those vertical thin lights that go between the bag and fender to complement the tailight. Not don't yet. It's not a bagger till it's a bagger. I was able to buy the fairing/headlight/radio Guage all together from a buddy that was gonna turn in his 2020 rg to the repo guy. Instead I paid him couple bucks and had him report the bike vandalized before turning it in😅. That's how I got all the rg parts I needed. U will need the rg right hand control to change the volume on the stock HD. It's amazing that the dyna ecu and bcm recognizes what those white and red command wires are telling it once you plug em in. Not gonna lie it was a pain in the ass but I got it done.

@hebertjesus9297 Жыл бұрын

Obrigado pelo video

@Fozz420 Жыл бұрын

Hi jus wondering if the exhaust being there had any effect on the bags as far as heat goes? I have V&H pipes that end under the bag just before kind of like yours. Did everything work fine as is?

@alaskagarage Жыл бұрын

The exhaust was heating up the bags, but it wasn't at a point of doing any damage to them. I'm running hard bags now tho and they drop down lower than the other ones and might run into needing the turn out but won't know till summertime when all the snow melts to test.