Dynamax Slide-Out Operation

[@gaylemccowin5573]

This video has been very helpful to us. Thank you!!!

[@sobania6095]

RV tech here, thanks for the help.

[@zayra630]

Question: If your slides are already in the IN position because they are not working, and you need to program the panel, which means that the slide in/out panels are not working, how do you get the slides out to begin the programming with the IN-slide motion first?

[@ForestRiverInc]

If the slide is already in, press the “set stop button”. That sets the in-stop right where it is.

[@chaduhtimm8768]

My 2021 30FW slide setting is fine left and right on top of alide but the bottom of the slide has over a 1 inch gap. Is there a way to adjust only the bottom?

[@ForestRiverInc]

Because the motors are at the top, it loses a little torque in the shaft at the bottom. It is not uncommon for it to be tighter at the top. As long as the rubber bulb seal is touching, this is nothing to worry about. If need be, a bulb seal can be added to the slide fascia side as well to close any gap or potential gap.

[@dorothyadams8168]

I'm guessing that the slide out trouble shooter that you just sent is basically the same as I will be doing.

[@ForestRiverInc]

This is the operation and troubleshooting video that we send for anyone with a Dynamax slide. It's not only tips on how to keep things operating, but if there is an issue, most people can use this to avoid going to the dealer.

[@vcmcrew]

Find and dandy unless you have a control panel in a 2016 that has no faul lights!

great video but now my slide is stuck on the rear side living room slide and i can not get it to extend..HEEEEELP, ready to burn this pos

[@ForestRiverInc]

It appears that we have already reached out to assist you on the Facebook Owners Group (Official) page. As the 2nd or 3rd owner there have been a few learning pains. I think we have parts coming your way, let us know if that is not the case