Рет қаралды 9,130
www.rcd330g.com/forum/topic/h...
We know that there are Dynaudio or Fender sound system on Volkswagen produced on some PQ35 and PQ46 platforms, and there is an amplifier under the driver's seat, which works with RNS510 or RNS315.
1. For RNS510 and RNS315 with Dynaudio or Fender sound system activated, Dynaudio or Fender will appear in the startup screen. As shown below.
2. The head unit of Dynaudio or Fender is not activated, as shown below.
If you don't have Dynaudio or Fender sound system installed of RNS510 or RNS315, and you activate the coding of the head unit, you will find that the sound of the song from the speakers will become smaller. This is because after the coding of the sound system is activated, the sound output of the head unit is changed from Voltage Out High(VOH) to Voltage Out Low (VOL).
I want to explain that if your car has Dynaudio or Fender sound system, it can work on RCD330G Plus.
The default coding of the RCD330G Plus sound system not installed, and the sound output is Voltage Out High(VOH). But RCD330G Plus can be changed to Voltage Out Low (VOL). Although the coding of Dynaudio and Fender sound system is unsuccessful for RCD330G Plus, it has a Skoda sound system to choose. If you code as a Skoda sound system, the sound output will be changed to Voltage Out Low (VOL), and the current sound quality will be very close to RNS510 or RNS315, Because the amplifier can work for Voltage Out Low (VOL), The amplifier gain is reduced to 16db
If you want to be more perfect, you need to use VCDS, cancel the 37-Navigation and 77-Telephone options in the Installation list of 19-CAN Gateway, and then try to clear the error code.
If you have Dynaudio or Fender sound system, and there is no sound after installing RCD330G PLUS, you can try disconnecting the positive pole of the battery for 10 minutes, and then reconnect the battery. Will work fine. The purpose of doing this is to clear the memory of the original encoding of the sound system. If you have VCDS to set related options and clear the error code, you don't need to disconnect the battery.
To make it look even more perfect, I also made Dynaudio and Fender's Volkswagen boot screen. Just to be cool.
Of course, the Volkswagen sound system, Skoda sound system, Dynaudio sound system, Fender sound system have different codings. I think it is not only set separately for the different boot logos, it should be related to the setting of the amplifier. My understanding may not be completely correct, but for reference only.