DYNO & TRACK TESTED: A90 Supra Stage Comparison

One of our favorite things about the A90 Supra is how ridiculously responsive it is to basic modifications! A few bolt-ons, and it's ready to go toe-to-toe with some exotics. And in this video, we show you how each of our staged packages perform on the dyno back-to-back, and how Stage-3 compares to stock at the drag strip.
And if you're ready for this proven performance from your A90 Supra, check out our packages: nationalspeedinc.com/packages...
We want to hear from you!
Contact Us: nationalspeedinc.com/contact
Phone: [phone]
Connect with National Speed online:
Subscribe to our KZbin channel: / nationalspeedinc
Visit our Website: nationalspeedinc.com
Like us on Facebook: / nationalspeed
Follow us on Instagram: / nationalspeed
Visit us at one of our shops: nationalspeedinc.com/locations
0:00 Intro
1:16 Stage Overview
5:10 Baseline Dyno
6:03 Stage 1
7:12 Stage 2
8:40 Stage 3
10:14 Track Testing

[@phill4337]

supra is a future classic

[@williamlatorre3441]

Beautiful content! Super professional!

[@TechnoHouseHD]

Getting ready to updgrade from my gti and these videos get me excited. Thank you

[@srdjanbjelanovic]

Awesome comparison!

[@andrewchristmas2026]

Still the best video yall have made so far

[@peaceprayer595]

This really kicks butt and is consistent with my life philosophy of the most bang for your buck. Would I like a 700 whp Supra? Sure, but this set up is what really rocks for the money and the 93 octane. Nice..very nice.

[@M340B58]

Fantastic video!!

[@justinmedina2050]

Solid video and info provided 💪🔥🔥🔥🔥🔥

[@thelastsignature]

I love your Supra content 🎉

[@TheBestN1gga]

Following the channel because that way this guy explains everything is sick 🔥🔥⛅️⛅️

[@andrewchristmas2026]

Good shit I'd love to see more videos like this

[@audia4gt3076]

Great video

[@Philly_boost]

Nice work.

[@allenrowdy810]

Thorough video I like it

[@chrisnorcross3322]

It seems that you could’ve benefited from wider rear wheels. Great video.

[@badass1g]

Awesome video

[@NationalSpeedInc]

Thanks! Digging that F32 you've got!

[@badass1g]

@@NationalSpeedInc thanks for checking out my channel :)

[@andrewfranco4826]

Great video, would this be the same on a newer 6port Supra?

[@Mkv_jaahze]

My 2022 Supra ran 11.91 with jb4/ catless on street tires 285/35 19 on 92 pump

[@65sohc]

My Supra has similar mods to this one except I am running E50. My best Dragy time at the same DA as yours is 11.64@126.04 mph. This was done in "Mexico" rather than on a strip so my 60 ft. was terrible at 2.14. In better DA I've trapped as high as 128. E50 is awesome.

[@NationalSpeedInc]

Oh yeah, definitely a mid-10-second pass in it! 126-128mph is hauling the mail.

[@israSam]

e50 on stock fuel system?

[@vincenttang1171]

@@israSam e50 is as much as the stock system can handle.

[@vsmk5512]

Same here, I have a 21 with a locked ECU running a E30 on JB4 map 3. I ran an 11.8 at 123 with a 60 foot of 1.9.

[@andylam4350]

I wish you guys have a shop here in the Tri-State Area.

[@NationalSpeedInc]

We have customers ship in from all over the country!

[@LichaelMewis]

I want a native solution for the 2023 Supra manual transmission. Not a trick box like the JB4. Please advise.

[@pollorobot69]

For My Stage 1 Stock Hardware Stage 2 FBO Stage 3 Turbo Upgrade

[@589supra]

How do you get the torque up? I'm at 470 hp at stage 2 but the torque is only 410lbs ft/torque

[@Logicilly]

Won’t all the back firing or popcorn tune fuck up the cat anyway? Can I just go with a catless down pipe?

[@quinnyen]

Any plans to offer a similar package for the G42 M240i? Many of the parts seem to carry over from the Supra

[@NationalSpeedInc]

Yep, that is on the roadmap! Tons of carryover from our GR Supra program to B58-powered BMW models.

[@Giuliaveloce23]

So basically stage 1 is similar to stage 2 . So the tune is everything and the Hilton’s don’t do much .

[@ericsakuraykishaba5545]

is the computer modified?

[@TTVSITHLORD]

Have you guys been able to unlock the 2022 models yet ?

[@NationalSpeedInc]

Yes! There is a workaround. Feel free to contact us! www.nationalspeedinc.com/contact/

[@lobbywasabi8152]

NS, thoughts on the new 6 speed supra reveal?

[@NationalSpeedInc]

We'd love to see it happen! I guess we'll find out in April, ha. But frankly, if you're building for straight-line performance, the 8HP automatic still gets our vote. But for sheer fun factor? Oh yeah, the A90 would feel perfect with a manual transmission.

[@A90MKV_]

What’s the website to buy these packages

[@NationalSpeedInc]

Right here, Angel! nationalspeedinc.com/packages/toyota/supra/2020-mkv-a90-chassis/6-cylinder-3-0l/

[@einquantumprivat1674]

In germany is a stage 1 only software 450 hp and 650 newton meter. Why is this on your shop stage 3

[@JasonCabrera]

How do you do the relearn trick for the tire pressure

[@NationalSpeedInc]

This site has a good write up: enginepartsdiagram.com/toyota-supra-tire-pressure-monitor-light-reset/

[@JasonCabrera]

@@NationalSpeedInc thanks and nice vids love em

[@lilturk726]

Are you guys able to tune the 2022 A90s too?

[@NationalSpeedInc]

As it turns out, the 2022 ECUs are untunable, however there are workarounds! We'd love to share the options with you, fill out our form on our website and a Performance Consultant will reach out to you. www.nationalspeedinc.com/contact

[@butterlord9915]

i was gonna ask dose the mpg change with the stage 3

[@K03sport]

...most likely. More air, more fuel. However, if ones tries to stay out of boost as often as possible and is easy on the throttle to keep engine load as low as possible, the fuel economy impact can be minimal. Plus, a properly tuned car will use its fuel better and there is a chance fuel economy can go up....but who goes stage 3 for fuel economy. 🤔

[@pawelludew291]

Full exhaust system missing. This would give probably 500hp and 550ft/lb torque

[@omranmkv]

These numbers whp or HP?

[@NationalSpeedInc]

Our dyno measures at the tire.

[@Carlos.Rivera]

Wonder how it goes for the 4cyl

[@350z33hr]

😒😒

[@NationalSpeedInc]

The 4-cyl hold their own for sure. For our testing, we chose the 6-cyl models!

[@K03sport]

Similar principles, but different parts. Software change will give the most gains. The hardware swaps will compliment (intake/exhaust) will compliment but not give the same benefit w/o the software....

[@f3nixfire]

I'm wanting to buy one of the 2021 Refraction Blue A91 Supras. Are those tunable now?

[@carmello000jp]

No

[@f3nixfire]

@@carmello000jp what are the alternatives? Piggyback?

[@carmello000jp]

@@f3nixfire my 21 tunable I had it tuned by botti back in September of 2020 ecutek. The opiate cloning John Visconti or buying a recked 2020 ecu, or Findlay. Check out on you tube Gms racing, click the turbulence grey supra

[@f3nixfire]

@@carmello000jp ok thanks

[@mkvjohnny]

i have a stage 3 supra 🤯

[@NationalSpeedInc]

How are you liking it?!

[@K03sport]

Carbon fiber engine bits are there to impress your friends, the dealer service bay crew, and to earn extra show points. I see no reason to litter the engine bay with carbon fiber. I do like your budget-minded approach to this build....

[@tombarber8013]

I like the mods that lessen the restriction to air flow. However the "tune only" improvement (25%) is obviously achieved by relaxing the design limit on boost pressure, which is to say, by changing the management of the wastegate. I think the interests of people looking to mod their cars would be better served if tuners (not to single out this one) would say this plainly, i.e., "We changed the software management of the wastegate to permit a substantial increase in the design limit on boost pressure, and this resulted in a 25% increase in engine torque throughout the rpm range." Engine torque may be thought of as an expression of the amount of work an engine performs with each individual rotation of the crankshaft. Engine torque has a linear relationship with this amount of work, and since this amount of work is in proportion with the quantity of fuel+air that is consumed with each individual rotation of the crank (and since the the mixture ratio is always going to be very close to the stoichiometrically correct ratio no matter what), it is apparent that the only possible way to bring about a 25% improvement in engine torque is by way of a 25% increase in the volume of air that moves through the intake manifold with each individual rotation of the crankshaft. This is a fundamental truth that everyone interested in improving engine performance should absolutely understand. Most people who make performance mods probably have some understanding of this fact, but it is probably true that the typical performance enthusiast does not have a perfectly clear understanding of this fundamental truth. Once you have a perfectly clear understanding of this fundamental truth, the question that you can't help but wonder about is how it is possible for a simple software change to increase this volume of air (the volume of air that moves through the intake manifold with each individual rotation of the crankshaft) by 25%. For anyone who thinks it is a good idea to do this, another way to achieve much the same effect, at even lower expense than a software change, is to swap out the spring in the wastegate actuator, or else modify the valve that is in the feedback loop (boost pressure is returned to the actuator via this valve). That said, the better way to do this, for anyone who thinks it is a good idea, is probably by changing this software, since this allows the tuner to make other changes that may be needed to accommodate the increase in peak intake manifold pressure.

[@65sohc]

Thank you for the dissertation on how an engine creates power. Anybody who doesn't understand that you increase power in a supercharged engine by increasing boost pressure needs to be driving an EV. As far as swapping out the wastegate spring to increase turbo output, this is 2022, not 1992. The B58 wastegate does not have a spring you can simply replace.

[@SheekTresSesenta]

Bro swapping wastegate springs hasn’t been a thing for almost 2 decades on German motors….. they don’t even have springs man

[@tombarber8013]

@@SheekTresSesenta Dude, first off, you and I are not "Bros", or anything close to that. Second, you ought to find some way to try and behave like you have a little bit of sense. What I mean by that is that you completely overlooked the point of the comment I wrote and picked out something that was not even a little bit important. If you aren't able to identify the important points of what someone else wrote and respond in an intellectually honest manner to the important points, then you really ought to just stay quiet. FURTHERMORE, as I ALREADY POINTED OUT in my response to 65sohc, BMW switched to electronic wastegates in 2014, which was eight years ago. 65sohc thought it was thirty years ago, and you think it was twenty years ago. Thus, you both were so determined to find a way to take cheap shots at what I wrote that you homed in on something that is very low in importance, and then when you did that, you didn't even take the time to make certain that you knew what you were talking about. I'm not going to restate the gist of what I wrote because it is fully apparent to anyone with any sense and with a modicum of intelligence. You and 65sohc are simply a pair of clowns, and I have no doubt that there are thousands more like you out there. Anyone who has any sense and who understands anything at all about the problems encountered when applying either a turbocharger or a supercharger to an engine knows perfectly well that detonation is a fundamental problem and that the way that this is ubiquitously dealt with by all reputable manufacturers of stock vehicles is by using a lower compression ratio to begin with. If you don't know this, or if you know this but don't understand the reason, then you are simply ignorant of the topic being discussed here. If you do know this and if you do actually understand the reason, then the appropriate and honorable sort of comment for you to have written would have been something along the lines of, "Yes, that's correct."

[@henerum]

Why did the thumbnail make me think this was a GT7 video

[@NationalSpeedInc]

Ha! We can definitely see it now.

[@henerum]

@@NationalSpeedInc exactly hahahhahahaaha

[@supitsolivlogs]

Aftermarket charge pipe is completely useless at this stage. Waste of money

[@NationalSpeedInc]

It is an optional part, which we spoke to in the video!

[@Not_jdm_af]

Agreed. B58tu- b30c mkv and b30b mkv does not have charge pipe issues . Was issue on previous gen b58. Stock charge pipe good up to 25psi. Stock turbo 93oct, max 22psi....usless to change out until further mods. Also stock intake is best. Cheers

[@corndawgz]

2600 dollars buys a downpipe and air intake and a tune?

[@carguy...]

The simple fact they didn't answer you tells you all you need to know. RIP OFF

[@NationalSpeedInc]

Correct, the package includes the ETS catted downpipe, MST intake, EcuTek flash points, In house ECU unlock, labor to install all parts and a custom calibration. When you total it up, the value is there!

[@beexiong2995]

That's not a bad price actually. Id personally prefer a catless downpipe in my opinion. It would also make it cheaper

[@350z33hr]

@@carguy... They replied 😒😒

[@badass1g]

@@beexiong2995 cheaper and more hp and tq but then you gotta live with the horrible stench that a car with no cat comes with. I hate mine lol.. so stinky