Рет қаралды 7,839
When I started this project, I expected to be done within 20 minutes. I was wrong. I discovered that the new wideband 02 sensor requires 18mm threads but the stock 02 has 16mm. The entire exhaust had to be removed, the 02 bung needed to be drilled and tapped with precision to ensure proper o2 sensor position. It was a little intimidating, but this is how I did it and these are the parts/tools I purchased below:
- DynoJet Autotuner www.fuelmotous...
- Bilt Hard 10" Drill Press amzn.to/3skCp1f
- Drill Bit and Tap Set amzn.to/3Hh3Ddy
Contact Me
Web: clickthruvt.com
email: michael@clickthruvt.com
Follow Me
/ sstressfl
/ stressfl
Thank you for your support and for subscribing to my channel / sstressfl