Dyson 2 Years Dust Clogged Internally

[@AkadeProductions]

I also took it all apart and even washed the insides with water, cleaner and a brush then I blew it out using air compressor and let it air dry for another day put it all together and my dyson is working like brand new

[@kyokomachida3934]

Do you have a reference video on how you did it

[@SerynityTv]

@@kyokomachida3934With water💀 can you not read

[@predatorishi]

I threw it away. It’s not a reliable machine.

[@WeSRT4]

This is from running the machine until the bin is overfilled.

[@battery_wattage]

Actually that space surrounding the central intake is the cyclone discharge chamber. That’s where the dust gets ejected from all the miniature cyclones. It’s a shame that Dyson makes the area behind the shroud so difficult to access since that is where a lot of dust can linger.

[@filiplaskovski9993]

Best thing for it is to get some compressed air and blow out the cyclone chamber when deep cleaning machine

[@annikajsutherland]

Thank you! Took it apart and had the same dust clog. So helpful 👍🏼👍🏼

[@EclectickMusic]

The only thing about this Dyson that’s better than a Henry, is its cordless design and the fact that it takes up very little space. Other than that, Henry wins all day. Simple and really efficient. I’ll definitely be reverting back at some point in time.

[@Oakcitymedia]

2 yrs later mine still like new with 3 dogs in the house. Always clean every week

[@ha1234]

In have a v11. Yes I agree, a lot of fine dust gets trapped inside. I noticed the clogged bit in the middle would remain unclogged if I followed 3 steps: 1. Open the canister the normal way by pulling the red lever. 2. Completely remove the clear outer covering by pressing the small red button. 3. Vigorously tap the bottom end of the machine in all directions to shake out all the dust. Hope this helps.

[@anneann9127]

I've been doing this a lot and I'm always shocked at how much dust comes out. We also use an air compressor to clean it. I still find after shaking it and knocking it against something that there is a lot of dust still trapped inside. I'm going to do what this video shows and take it apart. The dust inside also smells horrible.

[@chanicec3023]

Hopefully this works. My bf’s dog is a shepherd and the hair is insane

[@Animal_lives_matter]

Hey I am having this same issue on my V10 and have to keep shaking the dust out of those little channels. I reckon it might be easiest to use a second vacuum cleaner and make a custom nozzle funnel to make an airtight seal around it and just vacuum it all out.

[@blakaeg]

It’s designed that way so the user upgrades to their next latest and greatest! Not a very good design for anyone who wants a quality product that will last years and years of course Dyson is not designed to. It’s good for Dysons profits.

[@ExtremusStupidus]

bro this is called planned obsolescence, literally every company on the planet does this

[@LawnmowerMaster]

Agreed at this price buy a Riccar

[@Bleutigerr]

Ive had a few dyson cordless hoovers over the years and the amount of dust that gets stuck in places where you cant get to is ridiculous. So i opted for the Henry Quick and have to say it’s way better and no problems like what you’re showing in your video. Every pod thats ejected is quick and easy no messing with dust everywhere.

[@den-yc3hv]

I use my leaf blower to blow all the dust out of it .

[@Jan-1337]

basically that was already full after the first clean with the v12. so I guess I had a "2 years Dust Build Up" in my apartment :D

[@yeagemk]

Just bought the v15 to replace my v-11, but I am curious to try this technique to see how much is in there. Ive had it nearly 4 years and used it daily, so im sure its a hot mess. Thanks for the tip man!

[@filiplaskovski9993]

Shame with these cordless vacuums when it’s on low speed the cyclone generated isn’t enough to keep dust away from the filter like the corded bagless Dyson’s are!! Only when running the cordless Dyson on high settings is the cyclone generated actually effective at trapping fine dust in the bin!!

[@mrspiffy1981]

Dysons don’t like fine dust. Basically anything that will fit through the holes in the grate will eventually clog it up. Particularly if you live in a home where there’s a lot of building work going on, stick to a good old Henry with a bag.

[@Christophertys]

Do you have tutorial how to dismantle this? Thanks

[@fbasicst]

Why is there no single video on dissasembling the v12?

[@GrumpyBugger.]

Best way to clean a Dyson is using an air compressor machine. Air will clear in minutes. Do it outside. The one in video is still filthy.

[@digs6881]

Where can I see dust clean up. LOL

[@ivanlawrence2]

Thank you! That is amazing! Do you do a lot of overhead cleanup or something that might explain this? I just got my first stick vacuum (the V11 also) and I did notice that screen getting plastered with dust when overhead cleaning!

[@Animal_lives_matter]

Yep, same issue on my V10. These Dyson stick vacs cannot be used pointing upwards otherwise dust backflows into the filter , caking it instantly in a thick layer of dust. When cleaning overhead I use the bendy tube to angle the hose and rigid tube upwards so the filter stays level.

[@bcfran3g844]

We clean mine out every week and a detailed clean once a month.

[@seapeoplesdidnothingwrong1307]

I spryed mine out w a water hose, and left it outside on a hot day w a fan lointing at it. works better now.

[@BeforeThisNovember]

Did it give you the flashing nozzle block logo? I’m having that right now and considering taking it apart like this

[@chrisfirgaira]

Yes indeed! Mine is doing it now 6 months on, thinking of doing another disassembly update :p

[@Lilyflowers659]

It shouldn’t clog up if you don’t let it get full and clean it every time.

[@Rehbraun]

And when you see this after 3-4 years you’ve got payed 600 bugs what simple technic is inside you ask yourself wtf! 🤷🏻‍♂️

[@unclebob8419]

I'm back to bagged machines. Far less hassle

[@wtfman1217]

Bud bud ding ding 🛎️

[@kingtryton]

An average consumer would probably just throw the machine away

[@SBMAN123]

Even the new Gen5 has this same problem... What a awful design

[@tommymai3062]

You probably empty your dust bin once a year also

[@mikesolo84]

This brand is build products to be replaced by new ones and not be easy to repair by a normal human. That's why i don't buy Dyson.

[@triforcelink]

Definitely high maintenance, but man they’re good when working.

[@Limuh2]

Mine is doing the same thing an Dyson couldn't care less. I still have my canister Miele that is

[@peetabrown5813]

So we buy a hepa filter, no bag vacuum for a healthy home and then because of bad design we undo all that by exposing ourselves to a shit load of dust fixing a vacuum that has failed after only two years of use

[@MrJarod2003]

maybe a design fault, have a v7 , and using it for 4 years, no problem

[@minigamer2202]

Probably vacuumed ash

[@shaikahshey8042]

Can l have the name of the tools please

[@chrisfirgaira]

Using the iFixit computer repair kit, it's a 6 side torx security bit :),

[@jacobbillups4715]

I know this is over a half year late just putting in case someone down the line has the same issue. Like the above guy mentioned the full name of the bit is a torx bit (looks like a 6 point star) and they come in different sizes mostly in intervals of 5 (some exceptions). So if you see T15, T20, etc that’s how to work it out. There are a bunch of places to get one, personally I have an impact driver bit set for bigger jobs and a $10 electronics repair set from Walmart that includes all the real small ones (plus every other bit under the sun no lie lmao)

[@cal87249]

just use air compressor bro

[@chrisfirgaira]

Didn't work in this instance because there are filters covering where the clog is, and similarly it was so heavily clogged, I end up doing full submersed washes now after electronics removed

[@parkerford3800]

There are only two people that I know that talk and say the word lovash. His my people from across the pond my people who live in the UK and people who live in England and then my friends in Australia either way is something I just wanted to point out that I thought it was the dorables thing cuz it may just be me but I think it's adorable as little thing when they say little things like rubbish

[@mmapokemon2070]

Hey buddy can I get some astral radiance codes if you are not using it? Liked and subscribed

[@predatorishi]

Excellent. You pay 700$ for this crap and then clean it urself 😂🤣. No thanks.. regular 150$ VACS are better.. throw it after 2-3 years. Get a new one

[@philippephilippe8963]

c’est pas un v12 c’est un v11 🧐👎🇫🇷

[@Lintahlo]

Great vacuums, very poor design.

[@picklerick3459]

It’s actually great for their business as we buy more of their crap

[@therandomman6647]

All this instead of just buying a good vacuum.

[@Modi-Drink-Moot]

For the price we pay Dyson should make it easier to clean n maintain the machine like taking it apart via clicking which Dyson loves so much of