Dyson DC25 Black Latch Replacement! Fix a FLOPPY DC25!

[@IonaAurinko]

This video is still helping people, like me, and I even chuckled while fixing my vacuum, instead of grumbling. My vacuum wouldn’t lower all the way, and it was this same latch that was the problem. The screw & washer had come off, and fell out once I detached the ball. Was easy to get the vacuum working again, thanks to you. Made my day. Thanks so much!

[@cmarwah1]

You know mate; you’re absolutely nuts but I love it haha! Great video! Thank you for the help!

[@TIMMROZ-z3u]

Just a quick note to say thank you. You saved me! 😉

[@davidvowles4451]

Thank you so much. I didn't think fixing a floppy head could be so easy! 😂

[@andrewdavid-RYH]

Thank You for a simple and clear video. Was able to fix mine after watching your video.

[@jsware]

Perfect. Just the video I needed. Dyson DC25 back working. Thanks for the walkthrough.

[@elisafleming668]

Excellent video. Very helpful in troubleshooting our problem and then helping us to fix it too.

[@robsharp968]

Fabulous video. My Dyson DC25 is now match-fit again!! Thank you for putting this together.

[@JerryMckissack]

Thank you...exactly what i needed to see!

[@rkbearce]

Thanks for an excellent video. It was all I needed to do the necessary repairs on my wife’s Dyson.

[@martinwalker3088]

Another cracking video Sam. You make it look so easy. It was your strip down and reassembly of the DC25 videos that helped me so much to change a damaged spine. My youngest daughter is using the machine to this very day. Thank you so much 👍

[@gingamog]

Great video, just what I was looking for. Thank you for taking the time to make it.

[@dbtxn78]

Excellent video, I was able to fix the problem with my gf ds25. Great instructions. Thanks.

[@markcullip806]

You're a star ✨ thank you for your very helpful vids. 👍

[@jonfrancis93]

Perfect, also fixed the issue where the brush bar wouldn’t lower after moving the handle.

[@nethmonkey5414]

For anyone that has this happen I was able to resolve this by only removing one half of the ball and then using a small allen wrench (3/32 i think) instead of the t15 torx to tighten it down a quarter turn at a time. This means only needing to remove the 4 screws for the ball and no electronics.

[@justinmitchell235]

That was very helpful! And saves a TON of time! Thanks for the tip, my friend!

[@brucegustafson282]

Same here. I left the white wires connected taking care not to rip them.

[@9Fortman9]

He’s Brilliant! Thanks for sharing this!!

[@markcullip806]

Great help, thank you. 👍

[@drvacuum5697]

No I don't. But I have a DC24 blueprint something. Thanks for the video!

[@KirbyEnthusiast]

Great repair video Sam 👌👌👌👌

[@ParditkaLajos]

I love your detailed repair videos. A typical DC25 error, not like the screeching, crying sound that is the fault of simple, single-minded users who are lazy and illiterate to clean and replace even the filters. I have already repaired a couple of them, and instead replaced the original with a bushing and a stronger screw that goes completely through plastic.

[@lottie141516]

But Where do we buy the screws and that little piece of circle plastic that goes around the screw it

[@beko1987]

Probably be some used on ebay. Same screw as the Recline pedals too, and was used in the dc24 and dc25.

[@WHITECOMOFLAGE]

What is the part number for the black latch?

[@AwesomeVacuums]

Great video

[@ratm4484]

I was having trouble getting the latch back on the peg that the screw goes into. One end of the spring attaches to a hook on the body of the vacuum. The other end of the spring hooks onto the latch. I ended up removing the spring from the hook on the main vacuum body. Then I installed the latch, replaced the screw and then put the spring back on the hook I removed it from. Hope this helps if anyone else is having this problem

[@Ncheyne2006]

Do you know how to fix a Dyson UP22 that when you recline it, the back wheels don’t retract fully.

[@JaiJai-vb5vy]

Go to dyson put serial number in or model then replace the stabilizers

[@nathanproductions5817]

I saw Felix Fly bye is it Felix I don’t know can you tell me if it is Felix cause I’m not sure

[@beko1987]

Close, it's Phoenix but he doesn't understand either way 😂

[@nathanproductions5817]

Okay I know it was Felix but I just spell some words wrong when I’m typing

[@nathanproductions5817]

You know I think Dyson DC 25s are the best

[@paulcowan3222]

can anyone recommend an adhesive to repair broken handle swivel on a dc02.

[@beko1987]

Qbond has always worked really well on Dyson plastics I've found 👍

[@paulcowan3222]

@@beko1987 nice one mate am trying to keep a dc02 out of landfill due to broken handle swivel. Spent 4 hrs watching your Dyson videos last night. My wife was not happy 😁

[@TommyCullen-VacuumConnisour]

plug in a 110 volt step down transformer backwards and send the 440v through a vaccum cleaner that you dont like cough cough shark cough