E-Class Mercedes Benz 2003-2008 W211 radio hardwire installation

[@erosmichelle1901]

Wow thats great work but now for benz that has sensors only. How do you run the ones that need reprogramming.

[@Mangohabernero]

Very helpful bong

[@titanron30]

Excellent video!!! Thx a ton

[@khmerohio]

Thank You!!!!

[@Jemstk]

Lil confused i got so 2 things first that ACC red wire goes to cig lighter why youbsaid blue wire to cig lighter? Also simce i ran my own amps were is best place to hook up 9 wire conductor?

[@khmerohio]

17:56

[@khmerohio]

Think it this way the 9 wires conductor has 8 speakers wires. The 9th is the blue wire. Just think blue is red

[@Jemstk]

Ok thanks I was confused I thought blue wire was remote amp turn on red Acc 12 volt. Yellow 12 volt constant

[@Jemstk]

Yes I hooked everthing up all works but radio reboots here and their while I drive?

[@khmerohio]

Make sure your connection is tight. Other than that, your radio might be defective

[@Jemstk]

​. Yea bro it was the radio so xtron sent me the new updated one with new can bus box. I to this day still have not seen proper harness on my 04 e320 harmon so I had to splice solder and heat shrink. I noticed some models that big iso block plugs up and ones like mine nope so you have to depin the yellow and black ground and depin the speakers so ypu can connect. But it's done. I connected conductor same spot then ran the piece I cut to amps all good.

[@Jemstk]

What color power wire for backup cam

[@Mangohabernero]

Did you run a antenna wire if so where did you get it from also

[@Jemstk]

Any luck the antenna wire they give don't do nothing so I got the long cable with fm on it Rantoul back I got couple station nothing like I had though that has never been figured out yet I think

[@pheapvlogs]

Nice 👍

[@JohnnyThomas-ct8mw]

Where did you run your amp wire

[@Jemstk]

Remote? It's blue in the 9 wire conducter

[@Jemstk]

Okay got it bro one issue the back of unot gets so bloody hot . I smell it bro. Everthing workes xtron said i should have just olug and play i explained the yellow and black ground has to be hardwired. They dont plug in anywhere solder amd heatshrink i tore all that fiber crap out after market everthing. I ran rcas on most model w211 the iso harness does not plug and play lol they dont get it lol

[@jeffdieringer1]

BE CAREFUL!!

[@MaestroRoss-i6x]

dam bro that buts car as as fulty as it can be

[@KumbangNogori]

I don't speak inglish.canyou teach me indonesia