E-flite Turbo Timber Evolution 1.5m BNF Basic Assembly EFL105250

[@frankpalmer6678]

Thank you, Boozer. Another great presentation. You "splain" everything so well.

[@johnsons74thsquadron74]

1st one here. Talk about a perfect time for newcomers to get in the hobby since you’ve got the perfect 1st model right in front of you.

[@Jebusisblatantidolatry]

So i made a turbo timber evolution X... o bought the X wing set and modded the wiring, used the night X wing decalsz changed to the X 2 bladed prop and she flies AMAZING!!!!

[@jacksampson7711]

Love the dialog and accents. Great review and unboxing. If I wasn't so cheap this would be my next plane. Would like to see a cheaper version without floats or other unnecessary parts. Old buy slides a: "that's what she said" in there!!!!

[@FlailinMonkey]

Like the video as always! One step you guys didn't cover that I think would be useful especially for newer pilots is to mention/show ESC calibration before putting on your prop.

[@MerryBoozerRC]

That would be good I will try to remember it next time

[@kennethanderson-pe5jd]

great video , just got a turbo timber evolution 1.5 smart .

[@payitfwdrcl6171]

Oh yeah. Love the TT Evo. I tied up my wiring harnesses for rhe wings to keep inadvertent contact with servos and help aid in assembly of the wings. Highly recommend it. She flies great and is a touch and go machine on smooth asphalt if you have that option where you fly. Wesley, I also recommend the Night Timber X even though the battery is a bottom feeder. You would have fun mixing up some 3D. 👍👍😎

[@SunriseRCAviator]

Do as I did, purchase a Night Timber X wingset and some servos and you have two planes by just switching wing.

[@DadsRCHangar]

I do like this timber, great video guys 👍🏻

[@keithfilkins2043]

Thanks guys, great video! I want this plane!

[@paulmcneil5529]

I like the new colors on the new timber.

[@MerryBoozerRC]

Me to much better than the blue on. But the battery hatch 🔥 need this on the timber X now

[@SunriseRCAviator]

Yes they are so much better than the Turbo Timber!

[@thewholls7176]

What about adjusting the centre of gravity?

[@watrrfowler]

Can I use my dxs transmitter that I use for my aeroscout to fly the timber? It’s just the basic transmitter.

[@recedingairlinesrc1597]

Is there another upgrade version coming soon? I want this , but also want the latest. I know this is a few years old.

[@eugenetufaro6987]

You were supposed to use the washers on the screws holding the springs

[@craigschray4486]

What about trimming the control surfaces? I'm assuming you would have to loosen the linkage at the servo?

[@MerryBoozerRC]

yes there are covers under the wing that allow access to the aileron pushrods if they are incorrect out of the box.

[@Jaxter1137]

Does anyone know if you can pair a rds 8000 airtronics radio to this aircraft

[@KB_RC]

Well done Boozer! I want this or the Night Timber X. Just worried about the lights burning out on that one. Do you think they will ?

[@MerryBoozerRC]

No I don’t think that would be an issue. I have several of the old night planes from horizon and haven’t had any issues with them.

[@KB_RC]

@@MerryBoozerRC Alright thanks Wes !

[@descontracao6566]

Thanks

[@dbowman8580]

Can you take a picture of your receiver. I want to make sure I have my ports are set up correctly because mine is not binding

[@MerryBoozerRC]

Make sure you step back at least 5 feet when you bind or it will not work.

[@dbowman8580]

@@MerryBoozerRC I've done that. I realize you probably take a pic so can you tell me what you have in port 5

[@MerryBoozerRC]

Can’t send a picture on KZbin but port 5 is blank. When you power on the airplane and press the Spektrum logo on the receiver is it blinking? Also what transmitter do you have?

[@dbowman8580]

@@MerryBoozerRC yes it blinks and I have the dx6e transmitter. Port #5 is blank and so is the port next to port #1. I have a plug that that has wires attached to some servos but I don't know what it plugs into

[@MerryBoozerRC]

That is correct when it’s blinking with your DX6e hold the bind button and turn on the transmitter should say binding on the controller

[@snoriverrc3842]

I pre-ordered mine the day after it was announced, finally received it 2 months later...damaged. Here we are almost 4 months since pre-order I still havent received the replacement wing...I love HH birds, I buy all their products, batteries, receivers, transmitters, but this experience is making me look elsewhere for ALL my new planes.

[@MerryBoozerRC]

Sorry to hear that 😐 this year has been hard for all RC companies with shipping and parts availability it’s a fun bird if you happen to have the old blue wing it actually fits to get you flying

[@Mintzent]

what do the slats for

[@MerryBoozerRC]

Helps the plane make more lift at slow speeds so makes it fly slower