E&L QBZ-191 GBBR In-Depth Update - Part 2 [Nonocat Review]

[@YioAirsoft]

I just bought the 191! Thank you very much for this incredible review, your advice will be very useful to me 😀

[@boyanmichael8301]

Nice to see the part 2🎉❤

[@Sightblinder801]

Thank you very much! I had purchased one if these and was trying to figure out the best ways to increase performance. This was very informative and I appreciate your effoet in making this video. It helped answer a few of my questions. Hopefully I can get mine running a little more consistently.

[@jaxim1668]

most detailed video on this❤

[@626KiDD]

I was really on the fence on getting this gun, but many players recommended TM's or VFC's GBBRs. I want to like this gun, but you pointed out the gun's short comings. Here's hoping E&L fix these issues on a updated model in the future. Thanks for the update.

[@tigerking1668]

Thanks for the update on the gun, has E&L comes up with any upgrade and improvements on the mags and gun.

[@NonoCatNZ]

Not really a comparison. The TM and VFC are not HPA systems but you could run an adapter. They'd run better and more consistent imo but it does mean spending more money for the adapter and upgrade parts(especially the mws).

[@JedociderShou]

I'd still go for the "proven and tested" TM gbbr hpa setup. I want my money well spent 😅

[@johnnystacks9468]

Great review.

[@MaximusThe12th]

2:25 adding this O-ring to the stock gun on 650PSI made it jump from 0.5J to 2.3J with 0.28 gram BBs... I'm trying to hit about 1.1J like how you did at 1:27, what other mods were done to it? Just the 3 from the last video? Cutting the nozzle spring, adding the rubber pads to the back of the metal spacer in the bolt, and adding an O-ring to the metal nozzle?

[@yuanyuanxi262]

The 2 mods you listed are for increasing the FPS

[@CapitanPlaneta1715]

So, if we put an O-ring on the nozzle like at 2:50 and cut the spring of the nozzle but leave the regulator at 850 psi. And we modify the nozzle itself by drilling it and adding a screw to reduce the air flowing through it, which then goes into the barrel. This way, we reduced the speed of the Tippmann M4 Carbine, which is quite similar in terms of its system. It’s still based on a paintball marker and works in a similar way. What would happen?

[@littlehorseyhorsey]

Liking just cuz of the beginning bro 😂

[@arvo_septus]

I really love the idea of this gun. I want more GBBs that can be HPA and with aeg mags. But this just doesn't look like it has the build quality for the price its at. It seems like it takes a whole lot of custom work.

[@NonoCatNZ]

To be honest, the price is still justifiable. You won't find a HPA ready item at the price and you definitely won't find much GBBRs at the price that has a one piece steel barrel, full steel internals and a DLC coated steel bolt. There isn't really much work to be done either... just some o-rings and tape. The design is not perfect (if not lazy) and Quality Control is horrendous but that's about it.

[@zeeksy6276]

The build quality looks really solid? Tf are you talking about?

[@ChristopherTamer]

Glad you could get your barrel off. Mine is on so tight I even tried to heat the barrel nut and still could not get it to rotate!

[@NonoCatNZ]

There's that little notch on the top that pins it. Was that depressed before turning?

[@ChristopherTamer]

@@NonoCatNZ it was depressed.

[@wanliliu9527]

I have a question, by putting the O-ring on the nozzle (2:20), can it lead to inconsistency in BB placement because the nozzle would not go deep enough into the hop up chamber?

[@TankeShashou]

its been a little over a month since I got mine and Ive run into a problem I cant seem to fix. I had been intending to run mine with c02 but after tightening and piercing the cartridge all the CO2 seems to just leak out. The first cartridge held fine but after a few rounds it started to leak. There isnt much on the rifle so I was wondering if there are any solutions for this.

[@pewpewDino]

I like mine, but I truly hope it is as accurate as my MWS

[@NonoCatNZ]

The hop system is very inferior from the MWS but it does output a significantly higher velocity to make up for it.

[@maxchen6871]

due to the lack of after market support, i have actually designed and made quite a bit of body modifications, a Mlok handguard for my type 191 foam dart launcher.

[@masonchiu2854]

im interested in your MLOK handguard, ive been putting together a parts list and the MLOK rail has definitely been unobtanium. Do you have a website or somewhere I can see your work?

[@aterriblefuze9540]

What are the conditions for the 4 setups. Can the stock gun with a tank output pressure of 650 and .28 gram BBs hit below 350 FPS and 1.2 Joules?

[@MaximusThe12th]

My stock gun shoots 0.5J with 650PSI with 0.28 gram BBs

[@MaximusThe12th]

I added an O-ring to the plastic nozzle like in the video, and it immediately went up to 2.3 joules; I'm finding it hard to find the sweet spot; I'm going to try cutting the spring next

[@lymbo5303]

Where can you get the bayonet?

[@marcuskahn3783]

Sort of remind me of the ARs featured in Wolf Warrior 2 still a good Hong Kong action flick with a barrel of laughs to be had.

[@TK7837]

Did you block the old co2 cartridge, otherwise it will just feel up with air 👍

[@NonoCatNZ]

The whole point was to take up some space yet leave enough to supply for burst fire. See 9:10 for issues if there isn't enough.

[@velowelder6333]

This is a production beta tester prototype trying to recover R&D expenses of a failed project. E&L should of just made this a paintball marker like it wants to be.

[@hide.ygamechannel6849]

👍️✨

[@Terminatorbart]

👍

[@invisiblehans6879]

❤❤❤

[@jamesboler6185]

I'm having the same issue with the mags on my ics. Tomahawk, I think it's the src bbs All other bbs feed fine, so not a mag issue

[@NonoCatNZ]

@@jamesboler6185 Hi James, ive never had issues with SRC BBs for the last 10 years and all work perfectly fine in any other replicas. As the Video shows, the mags do split with the screws free floating. This also only happened with the mags 3-4 games later.

[@Lobotomylover1]

Lobotomy

[@理塘丁真-v3d]

感觉你越来越像男的了

[@pakjai5532]

If you have nothing good to say, then it's better you say nothing at all.

[@理塘丁真-v3d]

@@pakjai5532 我就是故意的，咋地