E168 Error Message

[@maryrawson4324]

Thanks for that, I had not a clue, as my water was running cold, so took your advice and reset it, working fine, and I do not know a thing about boilers, heating so I would have been having a cold shower tomorrow!!!! So thanks again.

[@dudekushie3762]

Replacing the board doesn't always fix E168. P.C.B is common but E168 can be indicating that there has been a previous fault of a different code that has not been fixed and is still undiagnosed, therefore E168 is displayed as a replacement code when a previous code has been cleared and it cant remember what the original code was. E168 can also be linked to most of the other components not operating or lacking electrical integrity.

[@ARBoilers]

+Craig C Thank you for your comments we always learning from each other

[@fionaclark3632]

Craig C

[@fionaclark3632]

Craig C thank you soooo much for this comment Craig! I am glad I came across it, having the E168 error code I was dreading paying a hefty bill for a new circuit board but I just tightened the pressure valves under boiler then bled all radiators, reset boiler and all is fixed! 😀😀😀😀

[@tomspotley5733]

Oooo I got all excited that this might fix our problem. We had a gas engineer turn our boiler off and replace a part in the meter housing after we had a carbon monoxide alarm go off. Since that we’ve had the E168 error. Sadly can’t seem to clear it :(

[@MrAhmedYAli]

Before you call out someone try switching off/on the plug at the wall. That worked for me.

[@GGJ150392]

Had this error the past 3 months! It turned out to be the room thermostat!

[@baitroute5554]

Joker thought he was going to explain what to do instead he’s advertising

[@joncocks2262]

From what I've seen E168 is something to do with eh diverter valve not clicking over between heating and water.

[@ARBoilers]

Yeah that can be the case

[@robertstanway9893]

If it's your own boiler you dont have to be gas safe registered but must be Competent, I hold all current ACS qualifications, dont have gas safe registrat6but can work on my own boiler

[@ARBoilers]

No the same rules apply sorry

[@ARBoilers]

Also can you subscribe to our channel 😊

[@jessicagould8584]

I’ve re settled it and done the water pressure and it’s still saying it?

[@ARBoilers]

This looks like the pcb if it's E168

[@robertjh123]

Great! Your boiler is not working. So call out a plumber. I knew that already. Video only shows a boilier with nothing wrong with it.