E36 FINALLY gets a COMPLETE interior.. (door card solution!)

[@hammerswrenches2174]

Dude the homie vibes are what makes this channel. Sure the cars are sick, But having fun and chilling with the boys is what it's really about!

[@alexelrod242]

Listening to donny try and do words good

[@Relentless2E2K]

word bro, i moved across country and miss my homies the most

[@seangraffis7361]

@@Relentless2E2K Make new homies🤷‍♂️ Homies ain’t gonna pay the bills for you

[@SteezySquintz]

FR DOE feels like you standing right there

[@Relentless2E2K]

@Yousef Maverick get the fuck out with your spam

[@shaneroberts8668]

So happy to have helped jimmy find the manifold. So cool kind to kinda be a part of the video 😭🙏

[@PpLaaY]

Putting a thin layer of insulation behind the door card would eliminate that cheap feeling when you knock on it.

[@parkd240]

that fiberfill fluff shit you put in subboxes maybe? absorb sound and all

[@Aspen51]

That thin lightweight sound deadening stuff...... used it on my door cards & it worked mate

[@Tanner731]

the dynamat/killmat rubberized peel ansd stick shit would make it nice

[@parkd240]

@@Tanner731 i used Noico brand off amazon in my whole 240sx and it did stop rattling a bit maybe, mostly stopped noise from getting in or out. Noico is cheaper and does the same exact shit. although filling the volume behind the panel is probably better for these plastic cards vs air space still there with a little mat. i’m assuming.

[@Tanner731]

@@parkd240 I have the noico in my car, I think the move is to use the rubberized shit to deaden the plastic panel and some insulation to fill the cavity

[@N3M3S1S357]

Nothing like a bunch of homies sitting around rubbing one out on an intake.

[@DNASocial]

I laughed so hard when everyone started yelling at DJ for pushing mongo 🤣

[@ThomSkateFB]

Car guys are just grown up skateboarders lol

[@nathanbennett9025]

Wtf is Mongo

[@11fbody]

@@nathanbennett9025 leaving your back foot on the board and pushing with your front foot. If your regular, or left foot forward, you would leave your right foot on the board and push with your left. It's a bit unstable, and looks horrible.

[@DNASocial]

@@ThomSkateFB that or BMXers 😂 but yeah i think I've only met 3 or 4 car friends that haven't done one of those two before becoming a car person

[@nathanbennett9025]

@@11fbody oh dam I wouldn't know that I came from dirt bikes to trucks lol

[@paulwemhaner9343]

Gotta love being a Patreon member and supporter of the channel. Love getting those videos EARLY! Keep up the great work Jimmy and friends!

[@excitingstuff420]

That's my Patreon schtick.

[@magradrift6271]

Well rather than spending my money on patreon I'm spending it on trying to have a drift car half as nice as just 1 off Jimmy's....... And as for getting videos early.... Patience is a virtue my friend!!

[@excitingstuff420]

@@magradrift6271 yeah that $5 bucks is a killer.

[@magradrift6271]

@@excitingstuff420 it all counts my guy!! I ain't rich! Got an average job, rent and bills to pay car to run and building a drift car..... The free content is good with me! And I don't think Jimmy's missing my 5 bucks!

[@j0m017]

"Patina of 90s patina" shirts would be dope. With a stencil of DJ's face on the back.

[@thesixtyfoot7059]

I would buy that shirt! 👌

[@timotheus2003]

I was thinking the same thing as Donny, add some fabric.

[@ady-bdavid1173]

It would look awesome if he flogged it

[@bobbysauer7826]

@@ady-bdavid1173 flock*

[@NoShowNC]

Love the Saturn door card Jimbo

[@RT-qt1xh]

Who else want a "cooking with jimbo” cooking content ? Like a special content with guest like the gang one for one 😂😂😂😂😂

[@menyus711]

"no longer FReddy but a real GReddy" you wont reGReddy!

[@cultclassicmotoring5636]

Jimmy, you should flock those e36 door cards!

[@rs3hank]

agreed, ive done it on door card inserts when the fabric was peeling. way easier to get good results flocking than doing fabric

[@Mikesxrs300]

agreed would look better

[@miiiikee_]

You can always sound deaden the back of the door panel and use 1/16” foam tape on the edges of the panel to kill rattle to the door.

[@michaelphillips8960]

Those door cards are rad! I bet a tiny rubber trim, like the kind used for overfenders, would look clean as hell and cut down on vibration.

[@ChimenyDust]

I love when RJ says have a great night and then smothers the light of reality for the viewer. Really hits different.

[@friedtoast69420]

Glad DJ is back in the regular videos. Dudes hilarious and you and RJ going back and forth with him is great.

[@Kennefff]

The rhd E36 is by far my favorite out of all your cars.

[@gateaccess818]

@10:54 dyna matt for car audio. will eliminate that "cheap" feel, make product sound solid when hit or tapped as it eliminates the vibrations and makes panel denser

[@PaceWorks]

You could wrap the Door cars with black velvet fabric , Would look like flock , Would look sick 💯👌🤙

[@thomodonnell8896]

Use some sound deadener inside the door cards, couple strips inside each will take the knocking sound out.

[@waterlover]

Spray dynamat on the other side of door panels it will help like no other . Also they sell button style screws that you bolt up then they have a cap that you just snap on for the seamless look

[@meangreenrt7608]

For the door cards, you could also spray some Bedliner/undercoating behind the plastic so it doesn’t sound hollow or “plastic-y”. Also use some foam tape where it makes contact with the door to prevent rattles

[@hextasy000]

17:52 this needs to be in a Braille video or something

[@megav0us]

totally agree :D :D :D

[@bradt9244]

If you end up needing the strap for the door make a slot in the panel and put a couple fingers width hanging out but mount it on the inside. That would give you a handle without a floppy ricer strap hangin around

[@mikebanks6704]

I am so excited for my rivnut tool n serts to get here also ordered a ton of downstar 10mm bolts with black n gold beauty washers im hype af thanks to jimmy i now found the perfect most useful tool ever the rivnut tool

[@brandonrichter6910]

Fill the large voids with spray foam and put some thin toolbox drawer foam on the inside with spray glue and it'll sound and feel better

[@Oki-kq1iq]

you shold add like a rubber seal around it like the one that are used on edges of door for dings. also maybe using canned bedliner on the back or even the one that is made for "sound deadening" from walmart might work to make it not rattle.

[@notsofairisit]

Also for the door cards maybe add some light sound detoning (if that’s how you spell it) and some fabric in the outside, you know it’s the little things

[@timholubowitch9097]

If you wanted to get crazy sound boom matt stuff. And maybe flocking this dash and doors have less glass reflection and numb the plastic sounds

[@Nimbus.]

Some people go their entire life and dont find friends like this. Keep this videos coming Jimmithy and crew.

[@010720]

Spray the inside of the plastic door card with a light coat of undercoating, then get some oem looking fabric to put in the middle part where it has the fabric on the factory door card, and then flock the rest of the door card, boom looks good, and no more cheap plastic sound and feel

[@kermaniriarte7541]

Add some sound deadening behind the door cover and flock the outside. It will look and feel much better

[@skylarbop8118]

Use the part from the top of the old door card. It will cove that little gap and you can throw some m3 on it to support the door on it

[@top10488]

I'd definitely dynamat or at least put the foam around all the edges to prevent rattle and stiffen it up. Looks great tho.

[@adamstilldrives]

I agree. Once it goes through summer and then winter it could change size and rattle a little bit

[@greysinclaire]

Little tip Jimmy! 1.) For the door hardware, put an o-ring between the hardware and the plastic door card. 2 days of driving it will instantly start to crack it. 2.) You can use some home depot roofing tape to sound deaden the plastic door cards and remove the plastic sound of it. It will instantly make the car more quiet.

[@gregstoddard8097]

Dynamat the back of the cards and add pinch trim molding to the edges and that should get rid of 70-80% of the hollowness sound of them.

[@joshjones2053]

Take some of the dynamat stuff for sound deadening bet that help alot and a universal windshield trim might fit on the top edge

[@ELLeeOh]

Spray the back of the door card with undercoating or use boommat to make it feel and sound more oem-ish. Just my two cents 👍👍from this guy

[@rossflores9342]

Cool to see he used these door cards, I've been on the fence about getting them for a while but was never sure how well they fit.

[@jacksonpolicani2491]

I’ll throw some extra stickers in if you get them ;)

[@tobi9441]

You could put sound dampening mats in the doorcards, or Brian could spray a layer of undercoating in the cards (also a way to insulate things)

[@RAYJR-ZN]

Hey Oakes Try some sound deadening material on the inside of your door cards, (dynamat)... Us sound guys use it to sound proof and reduce vibration and road noise.... Proper stuff will add a few kgs of weight but really good stuff.

[@RAYJR-ZN]

The one with the sticky rubber texture behind the aluminum

[@DadBodGarage]

I think you helped me pick the door panels I wanted. It was between the hard motorsports ones and the Mkah sheet metal ones. looks great!

[@hondacota4rt]

I have to try the WD scotchbright trick on my 30 year old bmw motorcycle. It has a lot of filthy cast aluminum.

[@Olie_d94]

If you don’t like the pull tab like that, open it up so that it’s flat and not flapping. You can even mount it low and out of sight. Just with enough slack to fit your hand behind to grab it. Won’t be flapping around or looking cheap.

[@Sauerbrew777]

Line the back of those door cards with dynamat to make them feel more solid. It will help with that hollow plastic-ey sound too!

[@davidhatcher1584]

Ya could put some sound dampening material on the back of the door cards and you can try flocking the front to get rid of the plastic look.

[@blksrsil]

Jimmy, I'm down for doing the 33 in stages, but while you have the engine out you should 100% do head drains so you don't kill the motor. Looking forward to the builds future 👍

[@michael_graper]

Throw some sound deadener on the back of the door card, it will add some density and make it seem less plasticy

[@twodogsyyc6729]

Get some spray glue and felt. Put it on backside of door cards. It makes a million times nicer they just feel and sound so much better 100% trust me buddy luv the progress on this car

[@Tito_Drifts]

Spray the back of the panels with flex seal or truck bed coating , should help alot.

[@gateaccess818]

if you added syno matt to back side of door cards they would no longer sound like echo'ing plastic, it would sound thick and soil when hit as it would absorb vbrations due to dyna matt

[@-gnicE-]

Jimmy you should really do head restrictors and a head oil drain for it. It makes these cars 100% more reliable and removes so many future headaches. Its so cheap to do as well. You just pop a rear frost plug out, tap 2 holes and run it to the oil pan and all your future oiling issues are gone. The Aussie boys say its a must and they know their RB's.

[@DjSaLsA64]

Seriously, that Skyline is such a cool car. Even if it is a base model, I’d buy that thing in a heartbeat

[@jordtizzle]

Use some sound deadening on the back of the panels to give it a more solid sound.

[@ahamedkhan232]

3D print a lil pocket you can epoxy into a cut out on the door card, in a spot that feels natural.

[@xDMAN767x]

Flocking the door cards would look super dope! And I think if you put some sound system style insulation on the back side, it would help with the feel and any potential rattles. 😁 love the content!

[@kyddzofcali]

Ey the e36 door cars are dope would definitely recommend sound deadening the inside of them get the plastic sound out 😉

[@dirtfloorcustoms]

Jimmy I just place and order with deutsch works and made sure I let them know you were the reason I was buying from then

[@coleferns1464]

"STOP PUSHING MONGO!" Brian is the best, always cracks me up lol. Also you should bring back the Long Live The KA merch

[@Jinx-dv7ne]

if you wanna loose some of that plastic feel when u trap spray the inside of the door card with rubberized rocker gaurd

[@caseyhubbard4350]

I recommend you Dyna Matt the inside of the doors to quite down the interior some and also retain the oem ride quality

[@SiggsGBR]

Yo Jimmy, pop the little plastic ring for the lock pins, off the old doorcards. It'll stop them catching on the new door panels when you lock the car

[@333krook]

"STOP PUSHING MONGO" lmfaoo

[@NicheEscape]

cut bellow the door handles and put the factory inserts in it so you can close it if the window is up

[@justinbarhorst]

I would just spray foam the back of the doors to make them sound less hollow and also it would probably dapper the sound coming in

[@tannersorgenfrey7566]

Love the effort DJ

[@geraldrogers9481]

Hates the smell of WD-40 , me loving the smell 😁

[@ethanevenson1037]

Maybe try flocking the door panels and dash. Probably clean it up alot more! Also would maybe deaden the plastic sound

[@shaneanderson8358]

Strips of Dynamat would make it feel quality for sure. Drill out the holes in the card for the tweeters and dynamat themmmm.

[@engersreyes3782]

Throw some hush mat or dynamat on the back side of the door cards, that will help the plastic sound.

[@yung-qn9nt]

Nothing like fun with the gang! I think some car audio sound deadening would take away that plastic sound.

[@discgolfstu4127]

When Friday is boring so far and then jimmy uploads a video! Heck yeah! Keep it movin and groovin!

[@fvpaquetqc]

That intake manifold looks great :O just the right amound of shine

[@123jrichie]

Get some oem bmw door pulls and graft them into the door cards and maybe add sound deadening to the back tho. Cool upgrade for the e36 tho! Keep rolling man

[@FEARLEZ0PHANTOM]

You should put some sound deadening sticky sheets behind it to help with the plastic clanking

[@TheGuysFly]

80mm throttle body 🤘 Low end response 😐 Power when the turbo spools 🚙💨

[@quintonthompson1677]

Jimmy Jimbo to fix the plastic feeling buy a flock it kit it will make it feel way more oem and I used spray foam in the back to make it not sound hallow but it's jank but worls

[@tybojengles4582]

All you need to do is use some spray glue and wrap the door cards in thin black fabric like a headliner. BOOM! They'll instantly look higher quality and more OEM.

[@ihaveaname1894]

That engine and intake together look sick

[@brandonrobishaw7606]

Best way to change the sound of a plastic door card is body filler on the back side of the card Also stiff foam between the metal and plastic

[@jacobsammons8047]

You should sticker bomb the door on the part that would be plastic on OE to give it some character but understand if not it's a slick build my guy 😍 and those cards are dope 👌

[@fallenbullseye]

THOSE BEANIES ARE SICK. AND AT FIRST, I THOUGHT THE APRON WAS SILLY BUT ITS ACTUALLY DOPE. I WANT!

[@rsvpjcp6569]

I coped me a apron and a 1

[@80Beau]

use expanding foam then cut it down even to fit. its light weight as well.

[@christopherwagner7781]

I love that you guys made an awesome slogan by accident. HOP BELOW SHOP JIMMY O! Lol priceless moment👏👍👌

[@notsofairisit]

I love how you were all able to help on the intake manifold. If I tried that with my friends it would end up with two of us knocked out lol

[@gateaccess818]

you can tel the casting for greddy is slightly thicker then freddy as outer diamitors are a chair narrower in omparison. thats why they whine like they do. very thin

[@grzegorzrygiel1766]

Nice video's man!! Greeting from Poland, hopefully that part works out for you!! We have a big e36 scene here xD

[@Rctreadaway]

I'd put some sound deadening on the back of those to help eliminate that hollow sound.

[@isaacberry5023]

That RB is looking saucy now. Love watching this swap go down

[@lagunalogan3349]

Use the honda civic style door handles, could drop the little hand bucket right in the plasticl door handle. Paint em up make em look oem

[@LonTierney]

Got my greenie beanie ordered!

[@LateNightRituals]

There also also metal top brackets that helps hold the door card. I havent tried those thi

[@danielward8649]

Maybe you could put spray foam or dynamat on the back of the panels to make them sound a little more solid.

[@AUTARKYDESIGNS]

The vibes in that shop are epic bro

[@erickrodasjr1660]

I leave the sticker on the bottom it’s the best!!

[@RYP3]

As soon as that drill bit touched the floor while spinning you blunted that bro, use a bit of wood under when you drill, your drill bits will last a lot longer

[@captainawsme]

You could use expanding foam inside the door cars

[@ryancrevier]

Jimbo - you need to get that Black downstar hardware - some black chrome hardware would look fire!

[@jeffreycaves2756]

That door panel with some BLK Down star hardware :) my OCD went off right there