E39 Auxiliary Fan on Amazon: amzn.to/2IQ60b3 E39 Auxiliary Fan on eBay: ebay.to/31HUNC8 Video Quick Short Cuts: 0:00 Front Bumper Removal 3:29 Fan Shroud Removal 8:24 Fan Failure and AC Problems 8:57 Removing the Old Fan 10:18 Installing the New Fan 12:00 Reassembling the Shroud and Bumper
@asmircar12 жыл бұрын
Ebay link is dead
@BIMMERZEITT2 жыл бұрын
@@asmircar1 thanks bud I need to fix all of those links. will update
@andrewandrzejewski3656 Жыл бұрын
Just had to do this service last night on my E39. Thanks for the video it was perfect no needless filler.
@BigDoubleDee4 жыл бұрын
Great video man! I like the simplicity and clear instruction of how to complete this without any extra non relevant commentary that other you tubers tend to add. I’ll be attempting this today. Thanks!
@SkipsFavorites3 жыл бұрын
Very good instructional video. Just did this replacement on my e39. However, the e39 bumper in this video doesn't have headlight washers. But easy enough to handle. But with these models being 20yrs old now, my washer fluid supply line was so brittle it disintegrated. If you have the headlight washers, plan on an extra hour and +$100 to replace that system while you're in there.
@BIMMERZEITT3 жыл бұрын
Good point! Yes if the lines break, it can slowly leak washer fluid over time onto the garage floor which is very annoying!
@technik3335 жыл бұрын
Thanks for video, another brilliant step-by-step tutorial - very clear and concise. As always, well done!
@buzzardbeurling3 жыл бұрын
Great concise video. Super easy to follow. Just ordered my fan
@ISellPron5 жыл бұрын
As a multiple E39 owner seeing your separate video of bumper removal I already knew that AUX fan DIY is incoming. These fans die so often.
@BIMMERZEITT5 жыл бұрын
haha yes exactly! I've done this job on several E39's I have owned, finally recorded one for the channel!
@AB-iw4kw2 жыл бұрын
Nice video! I am about to replace mine on a 525 M Sport. This has given me the blueprint.
@SAABguyMD Жыл бұрын
Thanks! Good video. I've had my e39 apart for months, been lazy about finishing it up. I didn't realize I was only 8 bolts from being done lol
@RobinSinghАй бұрын
Nice video. Made it look simple 👍🏽
@kerlowkeyАй бұрын
''We need to losen the headlight a lil bit'' proceeds to yank it off completely. Lmfao 😂
@tonys47513 жыл бұрын
This was a fantastic video. Instructions were excellent. I want to share a development that I experienced and viewers should be aware of since the e39 is getting older and corrosion sets in. The two 13m nuts holding the fan auxiliary on passenger side could become a problem (9:00-9:15). The bolt that these nuts fastened onto are not set and begin turning. There is no access to get to the bolt head. It wouldn't matter anyway as they are flat and round. I have no idea why these bolts are not welded to the frame. Long story short, I had to saw off the nut after failing to use an extractor. My bolts are still long enough to rest the new auxiliary fan in place but I need to figure something out to secure secure it. It is a total PITA , everything was going so smooth too. Driver side nuts were not problem. I believe this happen because this side is susceptible to anti-freeze getting all over place when bleeding the system.
@elusivespeedster5 жыл бұрын
Had to have a cooling system rebuild on mine. That was fun.
@BIMMERZEITT5 жыл бұрын
I did the entire cooling system on this one as well, back in February. A real dream to do that one in winter!
@ainsleynorman44252 жыл бұрын
Im doing this tomorrow. Thanks for the info and god bless me😂😂
@AB-iw4kw2 жыл бұрын
Thanks for the video I used it today to replace my auxiliary fan on my 03 525 msport. Unfortunately for me I couldn't get the last of the 4 nuts off the lower left bolt. The bolt and nut were so rusted and the bolt just kept spinning when I tried turning the nut. I had to cut the nut off. I probably need to pull the whole radiator out to replace that bolt as there's just not enough room to get that bolt out.. Ugh. For now, I just zip tied the lower left side as the remaining bolt is too short now to put a new nut on it. Great video though!
@lucastolte1931 Жыл бұрын
Thanks very much. Great straight forward to the point informative video
@unosec5 ай бұрын
very nice video tutorial, we have the same BMW 5er, thanks guys👍👍👍
@teodiazgonzalez67985 жыл бұрын
Can't be better than this... Great job. Kool!
@BIMMERZEITT5 жыл бұрын
Teo Diaz Gonzalez thanks Teo!
@vasilasenov6572 жыл бұрын
If this is not working properly will the car overheat ? because mine did and that fan i can se it doesnt turn ON at all
@gdhand15042 ай бұрын
Thanks for the info. Just did mine with your help.
@BIMMERZEITT2 ай бұрын
Nice work. Just in time for Summer!
@josemedeiros0074 ай бұрын
Great video and tutorial. Does your auxiliary fan come on when driving or sitting at idle? Mine only comes on when I use the conditioner. Also your Amazon link says Currently unavailable.
@joemoscinski25784 жыл бұрын
Hey there! I’m seeing this video is 11 months old, was just wondering if the fan is still running strong? The one in your link is significantly cheaper than all the other brands and I’d love to save a hundred bucks if the part is still reliable
@ucc1-3082 жыл бұрын
Thanks for those perfect instructions!
@JamesBond-hy4kv Жыл бұрын
Great job! Thanks for making this seem simple!
@Minsc205 Жыл бұрын
Thank you very much for the video! It helped me a lot.
@maughaja4 жыл бұрын
worked great for me. thanks for the effort to create and post. Sorry that I already had the fan so didn't use your links
@BIMMERZEITT4 жыл бұрын
James Maughan cheers James, be well
@chrisnewbold98763 жыл бұрын
Time to get a proper trim tool set!
@sebgp91023 жыл бұрын
Nice clear and simple video. Thanks.
@steliyans43403 жыл бұрын
Great instructions. Can you list the tools required for the job.
@JR-jc9uh2 жыл бұрын
Great video. Just watched this . It’s 2022 and I need to replace the aux fan on my wife’s 2001 525I. Question? Those plastic pop rivets you removed on the top.. can they be used again? If not do you know what size they are? How many did you buy and where. Going to attempt this repair but I want to have everything I need beforehand. Thanks so much for a reply and your help. Also anyone else in the know with an answer would be greatly appreciated. Thanks! JR
@abro9598 Жыл бұрын
When you swapped your front bumper to m5 style did the shroud interfere with the wiremesh grill? If so did you trim shroud? Thx for all the vids!
@michaelcruz.4 жыл бұрын
very helpful and i loved the video! Though I was wondering if I needed a new fan when my fan is weak causing the car to overheat and theres a leak through the cooling system. Do you any advice on a beginner regarding this issue? :) Thank you!
@ariannalerdo65444 жыл бұрын
Hey! This is exactly what is happening to me RN lol, first the coolant tank popped so I replaced it only to find out the fan wasn't spinning at all so I'm replacing it thanks to this video!
@michaelcruz.3 жыл бұрын
Arianna Lerdo just got my first proper diagnosis for my car and it turns out it’s a problem in the engine (valve hitting, need new gaskets, etc). Glad you got yours figured out! Drive safe 🙌🏽
@ariannalerdo65443 жыл бұрын
Michael Aaron Cruz woah! That's such a simple answer I would've never thought!
@DaveyJonesLockerwithJazzy4 жыл бұрын
Don't you check before replacement, many years of service work hard lessons taught me to do that before reassembly?
@maxextz5 жыл бұрын
Thanks for the video. Very good and helpful.
@beltowski70943 жыл бұрын
Nice video pretty helpful
@Brisco15 ай бұрын
What about the fan clutch? You didn't replace that at the same time?
@BIMMERZEITT5 ай бұрын
I typically show one repair at a time so they can be used individually as a guide or overview. Check out my fan clutch test video here (on an e39): kzbin.info/www/bejne/nKLRp4KPrMurmLcsi=iHMkj1yZpXSPiFuf
@Brisco15 ай бұрын
@@BIMMERZEITT Ah ok, thanks!
@juniorserrano93332 жыл бұрын
Hello today I forgot a socket in the front and dropped inside and fan destroyed it and a hizzing noise was loud like something leaking but not actual fluid u think I messed up the condenser??
@juniorserrano93332 жыл бұрын
Should I replace everything even tho only the propeller broke
@Sankara-Setu-Mutanda-752 жыл бұрын
Can you help me please. That “snorkel piece”, what is its actual name, eventual part number? Checked realOem, and my local supplier can’t seem to find just that part! Had it at a mechanic that has lost one bolt, and broken the item and the seal😞. 4:18 to 4:28
@fli20114 жыл бұрын
Any easy way to stop the fan shroud catching the fan ?
@user-hv9rd1cd6b4 жыл бұрын
شو نوع الزيت يلي حطلا ياه 10 / 40 ولا شو
@mgnumd89445 жыл бұрын
perfect, thank you very much
@agustajensen91144 жыл бұрын
I did this and my new fan is not working either
@alhasnabukres98774 жыл бұрын
It also happened to me. And I fixed it
@tarzan6885 жыл бұрын
Thank you
@alhasnabukres98774 жыл бұрын
Thank you so much
@BIMMERZEITT4 жыл бұрын
Alhasn Abukres thanks for watching :-)
@MegaFREEAIR4 жыл бұрын
thanks!!!
@bahysa_BMW2 жыл бұрын
Size of tools plzzzz ?
@MHD_854 жыл бұрын
Hi I have a problem in my car BMW E39 electronic fan front does not shut down continuously even when the engine is fully extinguished Is anyone help me and thank you
@BIMMERZEITT4 жыл бұрын
M Al Nayef what year and model?
@Problematicars2 жыл бұрын
Can the car over if this fan is bad ? Or it's jus for ac?
@BIMMERZEITT2 жыл бұрын
Yes it can overheat. Especially if the fan clutch has also failed and the car idles in hot ambient temps. The fan has dual purpose, AC cooling but also kicks on if it hits higher temps.
@Problematicars2 жыл бұрын
Thank u very much bro
@joaquinfonseca65634 жыл бұрын
when are you doing a electric fa conversion on a e39?
@BIMMERZEITT4 жыл бұрын
I like to keep my cars in factory condition so I probably wouldn't be too interested in doing that kind of conversion to be honest. It does sound interesting though, thanks
@joaquinfonseca65634 жыл бұрын
@@BIMMERZEITT thank you for your videos
@mrcow71955 жыл бұрын
*me wanting to spin the fan intensifies*
@BIMMERZEITT5 жыл бұрын
exactly! lol
@knansfrov67523 жыл бұрын
👍👍
@doc24195 жыл бұрын
Why would anyone want an weak aluminum engine case and head on an engine, oh, I know so BMW can sell more parts.
@BIMMERZEITT5 жыл бұрын
How weak can it really be though. My 2001 525i is 18 years old with 240,000 miles on it and still going strong. The aluminum saves weight. There are other materials used in later models, magnesium etc!