Arrma Vendetta How To Set Up 104 mph Changing 1 Part ? I Show It All

[@turonewyley9858]

I'm glad you picked up the color you did,now maybe you'll be able to see that yellow from a pretty good distance, you know us old guys,..our eyes aren't what they used to be....great video 😃😃✌🏾✌🏾😎😎,

[@gillian9178]

I agree 100% with you on color, my heart wanted the blue Vendetta but my head said green. My head won & i got green, at least my weary old eyes have more chance seeing the car better lol.

[@TheTylerjoy04]

Awesome! Thanks For The Tips!!😊 Btw What Size Drill Bit Did You Use?

[@RoostedFilms]

I just ordered my 6S ESC today. I sure didn't get a grub screw in my speed pinion. Thanks again for sharing all your work.

[@Bluecuban71]

Very nice to see how it's done . I like both colors but for speed runs I prefer the neon green also . Great video

[@soundmindtv2911]

It’s a good lesson with the antenna. Most people I think don’t understand that part at all. And the more vertical it is, the better reception it’ll get. The Vendetta really does seem like an amazing speed run starter car. Can’t beat that price!

[@earlmoorhead5555]

Yes 👍

[@DB-qm4jx]

Except I like the 4 tec better because of all the metal

[@we4fm175]

@@earlmoorhead5555 wonder if a piece of thin heat shrink would work to lengthen the antenna? Even if you didn't heat it up just a piece of tape at the point of them joining together.

[@pettre6016]

you can beat the price now with it at only $199.99

[@thomasford4184]

Only the the unshielded part of the wire is for reception. Lengthening the shielded part of the antenna does nothing really.

[@we4fm175]

Your video really explains and shows what to do very well. Did what you show and even being a newbie had no problems at all. Can you explain why you only adjusted the rear shocks and not the front? And is this done to raise the chassis or to give it a firmer ride, or both?

[@earlmoorhead5555]

Raise the back to keep the rc from backflips at 100mph also stiffer rear suspension as the wing will push it down causing it to flip if it’s to soft so I max out the rear and leave the front soft to push into the assfault 👍👍💯

[@we4fm175]

@@earlmoorhead5555 now I understand Earl. Appreciate your help and quick response. Really enjoying your channel and videos. Retired and just getting into the hobby. Some 50 plus years ago did the slot cars and this is proving to be just as fun. Thanks again 😊

[@Gazelle0078]

I’ll get a vendetta one day based on your videos but I can’t do it right now, I’m building two drag race cars that are sucking up all my money. Gotta love the hobby

[@C_J_Edit_z]

Wow these builds are getting good 😂 love the vendetta!!!great video 👍keep them coming!(definitely will have to do this upgrade if I get a vendetta!!)

[@branhamphotos5354]

"Attention to detail is not about perfection. It's about excellence, about constant improvement." That Earl

[@earlmoorhead5555]

Thanks 🙏

[@stuckintrees4796]

That’s a heck of a nice looking workbench. Great builds Earl👍

[@saltydreamsrc2786]

Waiting on my 150amp esc to complete the build with your advice! Thanks for the great info!❤️

[@jonvoogd511]

I like that neon green/yellow body for the vendetta, I wouldn't have been able to see the dark body down range. Thanks for tips on the wing hopefully it won't rip off at higher speeds.👍👍

[@scottm2398]

A 6s battery on that motor (98,000rpm on a full battery) is almost twice the motors max rpm of 50,000. How many speed runs before that motor burns out?

[@earlmoorhead5555]

Idk when it will burn out it’s still going years later 🤔

[@we4fm175]

Excellent video. I'm a newbie and really appreciate your time in doing these videos. Thank you

[@earlmoorhead5555]

Thanks 🙏

[@andrewmagro7703]

i just got my go pro 7 Black Today so Now i can start to unbox some kits as i have a Vandetta in green and also a Felony in black i have been wanting to rip for ages but also wanted to video tape it all so now i can just waiting for the weather to be nice to get out there and run me some RC i think i will too be raising the lid on the Vandetta as i don't wanna be rubbing the body on the tire at high speeds as could potentially cause a crash and break apart the tires , i would like to be able to get a bit of fun usage out of it before i start throwing in cash as i know i will need to at some point but prevention of where and when is possible is best so huge thanks for this video as i think this is the second or third watch getting more itchy to start this speed run thing that im really looking forward to with some higher end cars as of far i have just been using the WLtoys and HSP still getting up to 50 MPH(hsp) and for me thats fast, atm so any insight and handy tips ill take onboard for sure thanks Earl M for these awesome Video's its really appreciated 🙂

[@andrataylor6070]

I trying to put some grp on my vendetta,. I can raise the body, or how do I raise it so grp tires won't rub...Thx

[@bobbyhaltiwanger5102]

Morning from SC What you think about Drag racing this bad boy? What i was thinking just run the car for fun. Thanks Bobby

[@westtxgreg]

I was looking for a vendetta on sale but didn’t have any luck around here. Did grab an EXB Krayton on sale.

[@dvang9034]

Thanks to the 50t spur gear that arrma came up with, that makes every and any upgrades much easier to hit 100mph+.

[@earlmoorhead5555]

Yes 👍 I agree now all we need is a metal one and possibly a 47 tooth spur 💪💪👍👍

[@dvang9034]

@@earlmoorhead5555 omg yes. Def a metal spur gear would be so nice! I've seen some people doing the mod1 spur conversion, but it just seems too much work for not a whole lot of difference. So idk, still researching some more.

[@earlmoorhead5555]

Yes and heavy 👍👍

[@danielketchum7853]

Thanks Earl !! I just followed this video to a T. Can’t wait to go test out the results 🙏🏾

[@earlmoorhead5555]

Nice 100mph hear you come 👍🔥🚀

[@danielketchum7853]

I watched your speed run testing video after this upgrade and you had some oil coming from rear diff housing. Did it end up being the diff or was it the problem you found in the wobbling tires video you made about the vibration of the tires?

[@earlmoorhead5555]

@@danielketchum7853 wasn’t a problem looking like assembly grease leaking a little

[@danielketchum7853]

Awesome!!! Thanks for taking the time to reply to me. I watch a lot of your videos 💪🏾

[@earlmoorhead5555]

@@danielketchum7853 🔥🙏

[@chadbiermann3380]

Can't wait to see those new tires on there and if they handle the speed!! 💯💯 Looks really good!!

[@edwindegraaf6373]

Today I achieved 96mph with the tips shown in your video. Vendetta with spektrum 150amp esc. Thanks!!!

[@earlmoorhead5555]

Nice 👍

[@justinmihalaki7206]

how many S 4s?

[@earlmoorhead5555]

@@justinmihalaki7206 6s not 4s as I have a playlist showing this conversion to achieve 114mph with just an esc replacement

[@jeremystewart1785]

Did mine step by with your video...speed run test soon ! Really like the Vendetta more and more.

[@chrisstevensrcadventures9017]

Cool build I didn't see you tight down the motor bolts just a heads up.

[@earlmoorhead5555]

Yes I edited the video to cut it down but it was done 👍👍

[@chrisstevensrcadventures9017]

@@earlmoorhead5555 awesome just wanted to make sure before you ran it I know how it is when you get excited about a new rc and forget a step lol

[@antman1978]

On what battery?

[@dutchrc7759]

This is useful information 👍 Keep up the awesome content!

[@dr_racing7998]

I have 2 vendettas, I plan on trying to upgrade one of them. I might just get the 120 amp esc because I don’t plan on trying to run it on anything higher than 4s

[@lloyderc]

I just put speed pinion on mine. Can’t get clip on because the screws hit the back of the pinion . No idea how you got yours to work . Mine will not bottom out without hitting motor screws.

[@earlmoorhead5555]

There should be a spacer behind the pinion gear I believe 🤔

[@lloyderc]

@@earlmoorhead5555 mine didn’t have one. I’m not sure why it’s like this. Crazy for sure

[@earlmoorhead5555]

🤔

[@Bobsbargainbasement]

Darn Earl! You’re making me want a Vendetta real bad! I have a spare esc , all I need is a Vendetta! 😂

[@andrewwhiting5526]

I picked up one up the other day same colour as yours definitely looks better in person, that's an easy mod👍 I wouldn't mind trying those powerhobby wheels but unfortunately can't get them here at the moment due to USPS not shipping to Australia already had one batch of saga gears returned to him an my original order sitting in Jakarta for the past couple of months now unfortunately. So I'm curious to see how these tyres go, great video 😎

[@je2916]

Nice work! I know exactly what to do when mine arrives..💨💨

[@turonewyley9858]

I think it's great that you have the reference car right there👍🏾

[@theodoreelenniss8492]

I need to know how to make my car have reverse and how to get it out of amateur mode

[@JAMZ87SS]

I ordered the vendetta last night. Because of your videos. I think my wife is gonna send you hatemail lol. I can't wait to see what you do with this car now that you have one of your own ;) P.S. I ordered the green because my eyes could not see the car in your vid and I'm hoping I can see the bright green ;)

[@earlmoorhead5555]

Thanks 🙏 it’s really a perfect 100 mph learning rc car 💯💯👍👍👍

[@jamesbutler3239]

What pinion would make that setup good for drag racing 132'

[@rubenenergypoprider2048]

You are awesome ❤🎉 happy holidays

[@JAMZ87SS]

So changing pinion and ESC ... That's 2 parts ? no ?

[@theconsciousone9017]

What's a good battery

[@mikebarran7789]

I just bought a vendetta.what size bolt is that? Will a Traxxas xmaxx 4s or the 4s venom battery fit?

[@earlmoorhead5555]

Traxxas battery for the xmaxx normally to long but you can remove the stop on the vendetta to make it fit

[@JAMZ87SS]

RED LOCKTITE ???? on that little screw ? Wouldn't blue be enough ?

[@daviddelgado5954]

Just subscribe to your channel, I found it extremely informational! Love your videos man!! :)

[@earlmoorhead5555]

Thanks 🙏

[@jackladell5124]

The Sledge handles awesome got real good speed very durable

[@romper4444]

So help me understand, maybe I missed something...How is 1 part changing out a pinion AND an ESC? That ESC is a big cost upgrade, little different than throwing a 5 dollar pinion at it and going 100+mph no? I like what you did here otherwise, some good tips in the video. Working on a 75mph infraction mega right now. Sticking with nothing but cheap stuff off AliExpress.

[@earlmoorhead5555]

Pinion comes with the rc only have to buy one part and the esc is a take off unit as most have them from the infractions or any of arrma 6s line Or Jenny rc the cost is not bad to go 100mph for so little money 💰

[@joeabrenica4467]

Men i really liked your vids very informative, greetings from san francisco!👍👍👍👍👍

[@brainbleed5191]

I just wish the bind I put on mine with the DX5 would stay. I would rather not leave the receiver box open. . .just in case.

[@orangemound135]

Wzup Mr.Moorehead!!! Great advice and info about the Vendetta.

[@johnboy6955]

Man that green limitless is sick.

[@lukef5370]

Why put the the yellow wire to the orange and vice versa?

[@earlmoorhead5555]

The 6s esc spin the other way around so two wires need to be flipped 👍👍

[@arrmaracing9853]

Hi man,i do the same with 3 and for 4s and after two passes they cut off (esc).why?

[@arrmaracing9853]

And motor and esc is too hot 🔥 with only two passes.

[@Killa_b_rc]

So this motor mount is differ than the other 3s line motor mounts? I know that on my vorteks I couldn’t get my 26t pinion in there. It was too tight

[@earlmoorhead5555]

32 pitch so more teeth on the new speed cars 3s line that the difference

[@Killa_b_rc]

@@earlmoorhead5555 ooohhh ok. I’m running the vorteks 20t option speed pinion, spektrum 150 esc and 6s in my vorteks with an outcast wing on the front to keep it down. I had wheelie issues because it’s not the most aerodynamic body. That wing acting as a splitter keeps me plants but I can’t get pass 82 mph. Think if I get the hot racing motor mount and throw in that 26t I should get closer to that 100mph mark?

[@earlmoorhead5555]

The spur gear need to be a 50t the VORTEKS spur is to big to get 100 mph I show it in the infraction mega build 👍👍

[@Killa_b_rc]

@@earlmoorhead5555 oh ok. Got it. Appreciate your help man

[@earlmoorhead5555]

👍🙏🙏

[@junebugpetty7386]

Have you tried a bigger pinion ( bigger than the 26 tooth speed gear) with the Firma 6s ESC on 4S or on 6S? Thanks Thanks

[@earlmoorhead5555]

Yes in the infraction mega build 34/50

[@junebugpetty7386]

@@earlmoorhead5555 Have you tried a 36 tooth pinion with 4s or 6s on the Vendetta?

[@earlmoorhead5555]

Won’t fit as 32 t with the 50t spur is all that will fit without grinding the mount like I showed 💯

[@earlmoorhead5555]

34t is max after grinding

[@fcbaker65]

Good stuff ,I ordered my Kyosho parts from Power hobby ,seem to be a great store!..👍 Another great vid with tips!..👍😎

[@earlmoorhead5555]

Thanks 🙏

[@dcuoscissorkickz1614]

What's the best tire for 100+?

[@anthonyjaques5844]

When you put that 150 esc in there what size battery do you use

[@earlmoorhead5555]

Lectron pro 5200 mah 6s battery 50c

[@anthonyjaques5844]

And that 3300kv can take the voltage

[@anthonyjaques5844]

I got the 17 mm conversion and some grps

[@earlmoorhead5555]

@@anthonyjaques5844 yes like I’ve shown watch temps it’s not meant for bashing but speed runs if your doing back to back runs you need to watch the motor temps and outside temps don’t be running on extreme hot days and expect things to last a electric motor only cares about rpm and temps to live 💯

[@anthonyjaques5844]

@earlmoorhead5555 that's ausome ima try that out

[@raptorscott49]

What is the biggest motor that will fit in these platforms?

[@earlmoorhead5555]

Idk been using the stock motors

[@raptorscott49]

@@earlmoorhead5555 Do you think the ESC out of the 8S platforms would kill the stock motor on 4S?

[@Ken_412]

Do you have time to put together a Limitless for a decent fee?

[@earlmoorhead5555]

No sorry I don’t build them for anyone 🙏👍

[@Ken_412]

@@earlmoorhead5555 Right on man, I appreciate your content 😎👍👍

[@madmatt2769]

Great video! Loving the tips.👍🏻👍🏻

[@ethanrobledo1506]

How many cells do you run to hit 104?

[@earlmoorhead5555]

6s

[@ethanrobledo1506]

@@earlmoorhead5555 the stock motor can handle 6s ?

[@earlmoorhead5555]

Yes most motors don’t car about power just need to keep an eye on temps it’s not like an esc that’s says 6s rated most motor are build to handle more power 👍👍

[@ethanrobledo1506]

@@earlmoorhead5555 I see now, thanks for your help gotta get me that esc now

[@sammygonzalez7627]

Been staring at the limitless, what tires and wheels you running in them ?

[@theconsciousone9017]

Did you use the original motor

[@Rc-ho4sv]

🔥🔥🔥 Thanx 4 the info . might be doing this in the future . still haven't hit that 💯+😒😂

[@mikelester5524]

So u put a 6s ESC & left the stock 3900 kV motor in it ?? & Run 4s on that 3s motor

[@earlmoorhead5555]

Yes and run 6s on the vendetta

[@mikelester5524]

I can't believe that stock motor can handle a 6S battery

[@mikelester5524]

🤔💥

[@mikelester5524]

Have you had any problems with that dx3 controller and receiver I bought a vortex and it came with that controller and it didn't last a month

[@earlmoorhead5555]

@@mikelester5524 motor don’t care about the battery just rpm and heat kills motors so watch temps and motor will last no back n forth passes with a hot motor

[@carlosvelazquez4649]

Good afternoon Earl , happy Sunday

[@williamhodges1734]

What size battery did you use

[@earlmoorhead5555]

I show the batteries used in the series on my playlist as I’m not sure where you are in the series but the complete build and running in every stage so ppl can easily copy it is in my playlist 👌

[@my89foxbody1]

Great video! Just got one! Thanks for the insight!

[@Taino-Photos]

What batteries do you use or recommend

[@earlmoorhead5555]

Lectron pro

[@markbuttrick9594]

Great video very informative. Only thing is you say nothing about its a $160 dollar upgrade. And false with saying outta the box

[@earlmoorhead5555]

It’s a used take off part plus Jenny rc for the whole motor and esc combo is $130.00 or just buy the esc from them on eBay for $100.00 if you didn’t remove one from your other arrma 6s line like I did on my felony and infractions or 6s Kraton I had many laying around and everything on the rc is box stock including the speed gears included in the box with the speed wing ?

[@markbuttrick9594]

@@earlmoorhead5555 ohh trust me I'm not hating on you. Very informative video. I have the 3s vendetta Only bought it cause it was on sale for $319 at my local hobby shop in Massachusetts. I build a 2wd street slash that does 70mph. So this video sparked my interest on making the vendetta faster.

[@coreyharrell9079]

@@markbuttrick9594 Now their down to 199, I might bite on the Vendetta, kind of a steal at that price.

[@r8d4tube]

@@coreyharrell9079now every major online hobby store has it on sale for $199 till end of July. I’m getting both colors.

[@lawrenceroe8961]

That beautiful green build in the back is for me ..back off guys lol '

[@kirkkelsey6178]

I got 2 of them this week from Amazon on sale from $200 I got 2 they are seriously fast got 2 for $400 there still on sale now

[@earlmoorhead5555]

Nice cheapest 100mph rc you can buy esc change and put the speed parts on so $350.00 and go 114mph 👌

[@gamechangerrc4633]

Great how to video once again👊👊💯💯

[@chrishill2185]

What battery are you using matey

[@earlmoorhead5555]

Anything I have lectron pro and spectrum battery nothing special

[@DavidJohnson-rb2wi]

Wooow!! Nice pass 👍👍👍

[@soundmindtv2911]

I was at Ace yesterday & noticed they have spray cans of undercoating and spray-on bed liner. Was wondering if these might be good for reinforcing/stabilizing those weak areas of the body?

[@earlmoorhead5555]

Yes

[@brainbleed5191]

Wouldn't gear and ESC be 2 parts?

[@earlmoorhead5555]

The gear come in the bag with the rc car so only have to buy one part I also put the high speed wing on as that come in the bag with the rc as well

[@brainbleed5191]

@@earlmoorhead5555 OK the speed wing IMO doesn't count as it is just a piece of less than rigid plastic.

[@bobbyhaltiwanger5102]

Hi Again tires fr drag racing n the Vendetta ? Thanks Bobby

[@earlmoorhead5555]

I’m not sure what your asking sorry I understand there a language barrier but can you plz try again thanks 🙏

[@boydbadley7147]

Great video as usual man.

[@treysals]

Do you ever mess with the esc timing?

[@earlmoorhead5555]

I’ve tried it but not worth the heat it end up producing

[@turonewyley9858]

I wonder if you might go faster than 104mph due to less wearing on the rc🤔🤔🤔✌🏾,obviously I'm commenting as I watch

[@kevonrcguy2205]

What the punch settings on esc

[@earlmoorhead5555]

Stock untouched so around 3 middle settings normally

[@kevonrcguy2205]

@@earlmoorhead5555 k thank you

[@earlmoorhead5555]

@@kevonrcguy2205 speed car just doesn’t need punch at all 0 would work great as well 👍👍

[@Antonio-l6o3x]

Nice thanks for the tip sir

[@junebugpetty7386]

What's the length and size of the screw that you put in the wing? Thanks

[@earlmoorhead5555]

What ever fits I used two different style and showed how to in the installation video whatever you have

[@krishnadongordon]

Rc master from the hood

[@jordankeith6745]

You literally changed 2 major parts lol.

[@andrewap77]

Thanks for the tips…

[@thomasford4184]

Why not just run a short screw and have the nut facing up on the wing.

[@earlmoorhead5555]

The screw head still doesn’t fit in the small space but as an air frame power plant mechanic we are taught never to have a nut on top incase it falls off the screw will hold it in place 🤷🏻‍♂️

[@goofy21792]

For get a vendetta soon

[@wasa7]

Thanks for the tips, I got mine out for its first rip today. I Still need to pull the antenna out to increase the range a bit but I got 84mph on 4s and a 120A Esc.

[@Nobz619]

You don’t have issues of the throttle giving out? Or the power cutting out? I have the same thing just a 50t/29t gear ratio

[@earlmoorhead5555]

@Nobz619 no I put it in wheelie mode so it only cuts power in a wheelie

[@Nobz619]

@@earlmoorhead5555 how do you do that? Is there a video you have uploaded that shows how to do that?

[@earlmoorhead5555]

@@Nobz619 this question popped up in my promoto video today

[@purplelegorc2170]

🔥

[@emanuel616]

Oh yeah 👍

[@mzansirc]

Technically changing two things there Earl....Pinion and ESC😁

[@earlmoorhead5555]

Pinion comes with the rc the esc does not so I’m only replacing one part 💯💯

[@mzansirc]

@@earlmoorhead5555 lol yeah correct.Replacing and changing mean two different things lol.Keep up the good stuff.Love the new colour Vandetta you got.

[@garyellington3953]

Thank you so much

[@comments7335]

Changing 1 part??? More like the whole car!

[@earlmoorhead5555]

When I crashed it I did but only put an esc and tires 😳

[@comments7335]

@@earlmoorhead5555 👌

[@kennethmeyers5008]

Hell yes man

[@rcguygarage]

Careful with those SMELLS

[@earlmoorhead5555]

Lol 😂

[@iExcIuded]

Just picked up mine for 200$!!!

[@morganyates6598]

Hell yeah..I picked up 2 lol..both colors!

[@chriszak3282]

Like watching paint dry

[@timwatson7254]

Giver er a rip

[@waltersquires5232]

Ř4sêşeéẽ I am so eeřh

[@1521joe]

best video on the Vendetta, thanks Earl. Hopefully that stock motor holds up. thanks again.

[@earlmoorhead5555]

Motor seems to be doing well I know it should last as long as I can keep it cool 👍👍

[@1521joe]

@@earlmoorhead5555 yes sir. just to let you know the vents over the wheels, suck air out of the body which keeps it planted. thanks earl