Arrma Vendetta On 6S Finally Found A Weak Point ? Over 100 MPH Runs What Let Go ?

[@davidrivero7943]

I neatly duct taped all wheel wells on body with good results. Noob on a budget & happy with 73 mph, for now. Wealth of imfo., Sir and TY.

[@jamesgeorge609]

EARL....what really impresses me as how WELL PLANTED it stays on the road at those speeds,,,nice design....

[@earlmoorhead5555]

I agree hast gotten away from me yet at these speeds it’s impressive 🔥🔥

[@glennjthompson332]

Wow!!!!! Amazing it is! 104mph! In the record books! Nice one, Earl! (A+B+A+) The Bandit is still smokin!

[@tigerone2353]

Impressed by Arrma rc's. Nice car. 104mph...fast ! Thanks, I enjoyed the content. Thinking of buying one

[@mikebird8290]

GOOD AFTERNOON FROM ENGLAND EARL. I NEVER THOUGHT I WOULD LOVE SURFACE RC AS MUCH AS I DO. IM A PLANE HELICOPTER GUY ORIGINAL. STARTED CRAWLING IN THE WINTERS AS WEATHER FAR TO BAD IN ENGLAND TO FLY RC THEN. SO I STARTED CRAWLING NOW IVE GONE FROM CRAWLING BASHII AND NOW DRIFTING. SURFACE SEEMS TO BE TAKING OVER MY ♥️ FOR RC. THANKS EARL FOR ALL THESSI GREAT HELPFUL VIDEOS SIR. TAKE CARE BUDDY HOPE YOU HAVE A GREAT WEEK.🇬🇧🇺🇲🕊️✌🏻👍🏻

[@jeremystewart1785]

That beast was hauling straight and steady. Just got my order in for mine !

[@earlmoorhead5555]

Nice it really runs great even with the factory controller just pull the antenna up all the way it’s putting in work with no real big issues I’m surprised for sure 🔥🔥

[@travisdrury5556]

Impressed with your knowledge im just getting into the speed scene

[@rcjunkie260]

Those side winds gusting make for challenging speed runs😳 I bet that noise on the first pass was the wing ripping half way and you just didn't notice. And the 103 run ripped it all the way. Another good video!!!

[@earlmoorhead5555]

Very possible 😳🔥🔥

[@pitbullrcltd6252]

Nice runs E……you do have nerves of steel my friend…..,I’m still learning and My PB is only 75mph with my Felony using a 19T pinion … Gr8 content…..Thank You…..👍🏻😎💯

[@earlmoorhead5555]

Thanks 🙏 you will get there just keep running as much as you can 🔥🔥👍👍

[@mercer29-4]

Great video! Love the safety and k just grabbed one of these yesterday afternoon! I won’t exceed these speeds but cool to see others do it! Drive safe and happy RCing!

[@Bluecuban71]

Did not see that coming 😳 👀 Great video , a wing that's wild !

[@earlmoorhead5555]

I agree never even look at it that close 👀😳😳

[@nicoli9329]

Decent runs Earl. Run it without the wing, leave the side uprights n see what speeds you get with less drag. could be interesting 🤔 I believe it'll be stable enough, the body provides plenty of down force. Do power steps start @ 75% 2nd run 85% if it does well then adjust accordingly to 100% run w/o wing. I'm sure you'll achieve 110+ mph God speed & peace out .

[@fredstoychest]

Great runs as always. We know you were pushing for me but this was so great. Thanks for talking about the safety component. I had my Infraction ESC fry last week. Luckily I was in a parking lot but I’m going to be carrying a fire extinguisher from now on. These little power plants can cause some scary fires.

[@earlmoorhead5555]

Very true 🔥🔥👀👀

[@johannjoesten648]

Wow Earl I’m super impressed brother. No major failures. Also thank you for the tip. Safety first right lol. I carry a fire extinguisher in my truck already but I should grab my old vest out of the garage and keep it in the truck too.

[@earlmoorhead5555]

Thanks 🙏 Safty is important just wanted to express that so we all set some pb out there 🔥🔥

[@mikeg1841]

just ordered mine today with fee smart charger from tower hobbies because of you and your vids on this. I love watching your vids Earl!

[@earlmoorhead5555]

Thanks

[@robertruiz5417]

Your safety items are excellent

[@EXTREMERC416]

Clutch snapped

[@EXTREMERC416]

Bruh lol

[@earlmoorhead5555]

I expected the spur to let go to 👀👀😂😂

[@Ikonzrc]

Great run Earl

[@michaelkowell7106]

Three successful test runs on your way to 120mph. Ever considered increasing the size of the front fender holes to allow the tires to expand and at the same time keep the front end down as low as possible? Keeping a fire extinguisher in your vehicle is a big plus for so many reason.

[@dominic9279]

Be great if you did a live stream Earl I reckon you'd get good people up. Loving this video

[@earlmoorhead5555]

Yes I try and do lives with rc guy garage channel but have never done a live on my channel do to KZbin doesn’t really push them to anyone but I will try and go live next year when I get a proper live set up to record on 🔥🔥🙏🙏🙏

[@andrewap77]

Great tip on the wing!!! Thanks

[@earlmoorhead5555]

Thanks 🙏

[@InnovationRC]

I just got the same results! Literally attempted to run on 5s today and I'm literally literally in the same boat as you! Grr. We got this though. You'll find a way! I thought it was transmission related honestly. But car drove fine as if nothing is broken.

[@earlmoorhead5555]

Yes 👍 I know you definitely got this down I feel the tires might just be to soft for any higher speed without popping or ripping apart 🔥🔥💯💯

[@InnovationRC]

@@earlmoorhead5555true. But let's be honest. I didn't think these tires would hold up anywhere near with out test, without even being belted! So they are a solid tire for sure. But they have their limitations... Absolutely above my thoughts being out of the box tho. Solid video. Solid runs. Keep it up!

[@earlmoorhead5555]

So true I’m shocked the glue is holding up as well I’ve been waiting for the pop noise 😂so I’m letting off quick ⚠️⚠️

[@justindover8142]

It's the mega slipper u need the blx

[@Killa_b_rc]

Aye I know this vid is about the vendetta but your BMW looks good! I paused the vid on the shot of the bmw and stared at it for a min. 🤣

[@earlmoorhead5555]

Thanks 🙏 it was my first new car I bought and I still own it 11 years later just hit 100 k miles 👍👍

[@Killa_b_rc]

@near sighted time traveler riiiight! It looks good!

[@Killa_b_rc]

@@earlmoorhead5555 sheeesh. Looks good. Btw that motor will last more than a few runs on 6s… believe me I know🤣

[@kgm5512]

Officer: I see you lost traction back there Nah sir just trying to get some! Nice run man. Pushing it to the limit. I had a set of rovan tires blow the foam inside the tire. I’m guessing the center drive shaft breaks

[@earlmoorhead5555]

Pretty good guess I felt something in the drivetrain would let go looking at this rc 🔥🔥🔥

[@kgm5512]

@@earlmoorhead5555 and the guy who said 4 runs probably has the gears jacked and is not monitoring heat and running back to back to back with no rest!! 🤙🤙🤙

[@Virgovenom]

Sheesh that's a rocket 💯 I always like the 3s series chassis not too big and the power to weight ratio is wild.i have the big rock so if and when I get bored with it I will be using vendetta parts to convert it

[@carlosvelazquez4649]

Here, greetings Earl

[@earlmoorhead5555]

👍🔥🔥

[@soundmindtv2911]

Thanks for being safe, Earl. I see the fore extinguisher, plus good job on the PPE (vest) 👍 (Purposely not browsing comments yet because I want to see the outcome in the video before I read about it from someone 😉)

[@earlmoorhead5555]

Thanks ppe is important specially the Safty course I’ve taken make me at risk as I can’t say I didn’t know 🙏🙏💯💯

[@gamechangerrc4633]

Great video looks like a great RC to invest in 👊👊💯💯

[@earlmoorhead5555]

Definitely 💯💯🔥🔥

[@monsterrc1681]

Very nice Earl

[@kenobi5032]

It would be a risk but it would be a good test to remove the wing assembly and add the rear black diffuser back. Definitely will go faster. Great videos

[@josepenate7367]

Smooth and fast👍👍👍😁😁

[@earlmoorhead5555]

Yes real stable for sure 🔥🔥

[@ErocsRc]

Sounds crazy fast!

[@junebugrc3015]

Awesome speed run !!! 😁👍👍

[@earlmoorhead5555]

Thanks 🙏

[@kennethmeyers5008]

What’s up earl!!

[@earlmoorhead5555]

👍👍🔥

[@dirtbike9003]

I was wrong thought drive train... pushin that beast nice!

[@earlmoorhead5555]

Me to 🔥💯💯

[@riskaddictionrc]

I'm getting there. I pulled 101 yesterday. I put the hot racing spool on it with a 34/32. I also put the spectrum 150amp 2050kv combo in it too. I'm trying to find a better road cause I ran outta real estate.

[@earlmoorhead5555]

Nice 👍

[@DrHyde-cq3eg]

Time for BASHERQUEEN'S MAGIC!

[@losidude11]

yooo that e46 tho 😮😎

[@monsterrc1681]

Very nice earl

[@galennii4794]

Damn the wing lol 😂

[@earlmoorhead5555]

Right 😳😜😜

[@jeffreyhay2610]

wow i was wrong i said tire thats nut about the wing broke

[@earlmoorhead5555]

😜😜

[@DanjaBis]

Time for some foams! Speed cars outgrow the rubber glued tyres pretty fast when you get up there.

[@OmniMan_Racing]

Tires are definitely a problem. Arrma has the 85mm belted hoons coming out. Also think that single plate slipper doesn't like to hold power. The 3s chassis is actually easy to get into triple digits once you get the formula down

[@restinpiecesrc5528]

Im curious what you would get out of your 8s setup in a vandetta

[@OmniMan_Racing]

@@restinpiecesrc5528 I'm curious as to what I can get out of my granite still lol 111mph @89% throttle on 6s in 1000ft so far with plenty left in it. My vorteks is another car I still haven't seen what is fully capable of. I gotta link up with some Florida speed runners to find some really good locations

[@earlmoorhead5555]

Yes I’m running a 1k feet as well I really need to run it out but tire will pop

[@OmniMan_Racing]

@@earlmoorhead5555 you got plenty of potential in that vendetta man. If BSR or grp get on board with making 85mm wheels itll be a real game changer. Standard size grp's would require a good amount of cutting to the body unfortunately

[@orangemound135]

Wzup Mr.Moorehead!!! You're a guru at this. Just listening you talk about the tires and their treads, listening to the car deeply and safety. Good 👍 advice about the Vendetta. Arrma strong 💪

[@earlmoorhead5555]

Thanks 🙏 wish I was told this stuff starting out hopefully it helps ppl get into speed runs 🔥🔥

[@candybutcher8662]

thats a nice BMW m8

[@jonvoogd511]

Definitely the wing probably flapping, Tires ballooning

[@westtxgreg]

The body may give enough downforce without a wing since your just going straight. Be a lot more slippery through the air. Good video thanks 👍🏻

[@earlmoorhead5555]

Back end gets to loose without the center part on I’ve tried it on 3s 🔥🔥👍👍

[@westtxgreg]

@@earlmoorhead5555 ahh well sounds like it’s time for a carbon fiber wing. Maybe #Basherqueen will get something going.

[@rykerthestryker777]

Also what do you think would be a good beginner speed run car could this be a good option?

[@earlmoorhead5555]

Yes I said this in the first speed run video a perfect warm up car or a beginner speed run rc 🔥🔥

[@blaketundra3216]

If it takes 6s to find a weak point, I need one.

[@nofreerides7033]

Go for it … foams and gearing up ??? But if not 104 is good enough 👍👍👍 thought my XO1 was quick at 76 😂😂😂

[@leigholding1397]

would be interesting to put a camera facing the wing and see if the wing lifts up at those speeds, recommend carbonfibre the wing. also are the rollbars loading up equally left to right?

[@earlmoorhead5555]

Roll bars ?

[@leigholding1397]

@@earlmoorhead5555 swaybars..

[@C_J_Edit_z]

Are there little reflector pieces on the doted line in the center of the road mabey it hit that and it was too much for the wing 🤔

[@C_J_Edit_z]

Too much torque and down force 😬

[@earlmoorhead5555]

No reflectors on this road there are two next to the fire hydrant but no where near the rc car that’s why I run backwards 🔥🔥🔥

[@C_J_Edit_z]

Ok that makes sense great video ☺️

[@earlmoorhead5555]

Thanks 🙏

[@chancelbrown4526]

Best thing for the tires rubbing the body is foam tires

[@earlmoorhead5555]

I agree ☝️

[@silentassassin7175]

Do you have factory esc?

[@bigboyztoyz6981]

Hey bud Ii stumbled on your channel ’m a fan of your channel and also have a limitless with 160amp esc and I’m wondering what your gearing is

[@bigboyztoyz6981]

I’m trying to break 100 mph thinking about going to a 39 tooth spur and still deciding on pinion …keep up the great content

[@earlmoorhead5555]

Start with a 27/34 gearing and you’ll need batteries with a high MAH rating 6k or higher as the spectrum esc cut out if voltage drops half way threw the run pull trigger super slow and run an external cap pack from Phillip jolly or flopack rc on eBay should be 102 mph set up 👍👍

[@MJ-gq9nv]

Like toolz 👍

[@chadbiermann3380]

I was hoping for more!!! But still very impressed with the vendetta so far! 💯 maybe that noise your are hearing is the center of the wing vibrating off the body rib?

[@earlmoorhead5555]

Yes me to I know one tire hit and yes I believe the noise was the wing as well flapping in the wind 🌬

[@chadbiermann3380]

@@earlmoorhead5555 Looking forward to your next video! I thought you were going to run on Sunday!! But anxious to see what you find when you get it on the bench.

[@kevinmagiera9157]

WOW 👍🏻 You catched us all with the (rtr) vendetta speed fever 🤒 I cannot tell how excited I am waiting for the next episode of this story 🔥 so if you asked for a unexpected breakage I thought about anything in the drivetrain but the wing🧐 no- one of the last things I would have expected! It’s a mess you can not pull any data from the esc to get an idea of what goes on in the power system 🤷🏻‍♂️ On my last call on the 111 I thought by stopping the tires rubbing on the body it will gain some miles ☝🏻 But now I think the system-especially that motor- is at the limit. May the next bigger can size would change the game 🚀 if it would be on me figuring out I‘d try to gear down two teeth to see if it’s still going 104. Actually the motor should spin to 60/65k rpm so there’s some more in it at 6s⚡️ Like I already said I‘m really excited to see what you’re doing !! Really good work Earl 🤘🏻

[@earlmoorhead5555]

I’m at the limit of the tires the motor cold and there room to gear up but the tires just can’t handle any more speed 🔥🔥🔥

[@tonysmith7989]

The reason I said wheel come off, is if the Vendetta has the same platform as the other 3s lineup, the hidden screw inside the shaft that will work its way loose and the wheel takes off. Find the wheel and wonder how in the heck everything is still together and where did it come apart from. Inside the shaft that goes to each wheel is a 2mm hex head screw. Good thing is it can't come out of the shaft. J feel like everytime now I need to take the shafts apart to tighten the screw as I don't want to be chasing wheels. Lol. And cant threadlock it. And its usually just on the right side since you righten tighten but the wheels spin the screw out a little over time because the wheel is turning the opposite direction than it was tightened. The left side of course turns the same direction as the way it was tightened so haven't had one take off on that side. I usually make sure everything is tight before a run, but that was a new one to me. Now I feel like I need to take the drive shaft to each wheel off to make sure they're tight before I run it. This typhon from day 1, 2nd time I drove it the servo pentameter whent out, after 2-1/2 month of backorder finally warranted out, then the 4th run the motor seized, another 2-1/2 - 3mnth backorder wait again and was taking so long the horizon hobby guy felt bad since other than 2 runs, has been sitting for half the warranty and sent me an arrma 3s instead of the spektrum since it was still gonna be awhile for the spektrum electronics (may tell you something about them) and now ESC went out and right now you cant get ahold of Horizon. I bought a new servo due to the second one going out aswell, and no it was not because I didnt set the steering endpoints. I think that my typhon had a bad QC check trying to see if they will send me the Arrma esc and not another Spektrum. And when the servo whent out the 2nd time I was rounding a corner during speed run and it aimed me at a storm drain and all I could do was hit the break and it threw me into said storm drain and it stuck half in half out and cracked my chassis. I like the Typhon 3s but the spektrum electronics just haven't been good to me. My notorious 6s v4 last model with aarma electronics and not one warranted part needed. Someone I know has the Kraton 6s v5 and already had the motor and esc replaced. Plus transmitter as you could tap it and it would turn off, tap again come back on. Lol. So in essence I have a over $300 paperweight.

[@earlmoorhead5555]

Yes I’ve seen it to

[@chrismetalwilson2588]

When you do speedruns how do you set your camber and toe? Just curious would help with my speedruns

[@earlmoorhead5555]

On the vendetta there is no adjustment but on my limitless check out my smart phone wheel alignment videos pretty cool what you can do with an iPhone 🔥🔥🔥🔥

[@earlmoorhead5555]

kzbin.info/www/bejne/n3uooJebma56iq8

[@kevinmagiera9157]

Oh, and what about the center driveshaft? Is there a possibility for a huge wobble going on at higher speed?

[@earlmoorhead5555]

The bearing seems to hold that in place

[@MJ-gq9nv]

Rr x chassis flexible hmmm 109 here Time tor bracelet 👍

[@travellrobinson7268]

What esc are you using

[@johnboy6955]

What did you change on the vendetta just the esc or did you change motor and esc?

[@earlmoorhead5555]

Yes esc and rear body post to get it up higher I did explain everything in this rc as I changed parts 🙏💯💯

[@johnboy6955]

@@earlmoorhead5555 I must've missed the video of explaining the changes sometimes I don't get the notifications.

[@earlmoorhead5555]

Oh KZbin issues 🙏 I made sure to do a series even showing the gears after the run 🔥🔥🔥

[@johnboy6955]

@@earlmoorhead5555 yeah I don’t get a lot of notifications so I’ll have to go through and find the video to watch it. Thanks

[@earlmoorhead5555]

Two days ago it was my last video I believe I show it again on weds 🔥🔥🙏🙏appreciate all the comments and support 💯💯🔥🔥🔥

[@robertruiz5417]

I love this video

[@TheMiller607797]

So i put armmas 6s setup in my vendetta. On 3s im only getting 50s on 4s still 50s. Everything is stock but 6s motor and esc. What am i doing wrong. The thing should fly. ???? Help!!!!

[@THEMASKEDMASTER]

✌🏻😎🏴󠁧󠁢󠁷󠁬󠁳󠁿 104 at least it’s consistent 😂. It would have hit 104 again if you wasn’t dragging a wing 😂. I guessed wrong too. breaking a wing didn’t even pop into my mind 😂.

[@earlmoorhead5555]

I had no clue the wing would break off either 😳😜😜

[@kevinmagiera9157]

What about some fishing line on the tires to prevent the ballooning 🤔?

[@earlmoorhead5555]

That works on dirt and grass but on road it just gets cut off 🤷🏻‍♂️😱

[@arrmaracing9853]

Hi man,I have weak brakes since I changed the electronics.why?(2050 kv,150 amp esc spectrum).

[@earlmoorhead5555]

Programming is off or recalibrate the controller with brake trim at zero throttle and brake at zero and up the brakes in the esc

[@surfside75]

Probably that wing vibration on the body.

[@earlmoorhead5555]

I agree

[@jerryhughes6844]

the baby universal joint in the axle shaft?

[@earlmoorhead5555]

There holding up

[@jerryhughes6844]

@@earlmoorhead5555 I'm assuming they're like the Senton, That's one of the 1st things that broke At half that speed.( Some guys get all the luck.)🍺👍

[@klausochs7006]

Respekt 👍

[@soundmindtv2911]

What’s the wing material? Lexan? I’m surprised it failed. It must have been oscillating and fatigued at the bend. Good thing to be aware of gong in! Now Arrma def needs that Earl Moorhead tuned edition, complete with reinforced aero components 😉

[@earlmoorhead5555]

Lexan yes 👍

[@wizard7mm]

Fire extinguisher is a plus lol ask me about my new electron pro quad lol

[@mark737-c4x]

Is the original spectrum motor still alive? I ask Because I'm planning to run mine on 6s.

[@earlmoorhead5555]

Yes all three of my vendetta on 6s motors are still alive watching temps is all that matters

[@terrynavin55]

Would I be better off buying a 6s esc and run it on 4s, or just buy a 4s esc to run it on 4s?

[@earlmoorhead5555]

Depending on weight of the rc heavier rc need a bigger esc

[@restinpiecesrc5528]

Id probably try belted 1/8 street tires or some foams

[@earlmoorhead5555]

Yes there on order come in January 10th

[@rykerthestryker777]

hows the motor temps

[@earlmoorhead5555]

I show temps in the video 🔥🔥🔥

[@dutchrc7759]

Easy fix could also be to wake the wing out of carbon fiber

[@justinbonnette3784]

What gps do you use?

[@earlmoorhead5555]

Sky rc analyzer

[@travisdrury5556]

Did you upgrade to metal ring gears

[@earlmoorhead5555]

No

[@travisdrury5556]

Thats crazy to me 3900kv motor not getting hot on 6s🤘

[@Bobsbargainbasement]

Wow wing! I got it wrong! Lol

[@earlmoorhead5555]

Crazy right not what I expected 💯💯

[@mikeblankumsee4668]

What was needed to qualify for the limitless?

[@earlmoorhead5555]

New limitless giveaway should be soon rules will be the same need to be subscribed and comment in the video I said will be the giveaway video & not have a KZbin channel making money off rc videos as I want it to go to a true subscriber that want the rc not to use my build on there channel or sell it 💯💯🔥🔥🔥

[@mikeblankumsee4668]

@@earlmoorhead5555 ok. It would be my first kit if i won! #cantwait

[@robertkanady6489]

great job on the vendetta earl i did not know that 2 3s packs would be faster than 1 6s pack. how does that work? love the video.

[@earlmoorhead5555]

It’s not faster it has less voltage drop so it maintains better I still don’t understand why as a cell is a cell but for some reason it drops less running two pack with it own feed wires in series I feel it’s in the wires not dropping voltage to the esc 🔥🔥

[@robertkanady6489]

@@earlmoorhead5555 thank you earl appreciate it. you had some really good safty tips great job earl.

[@michaeljohnson254]

@@earlmoorhead5555 is that stock motor

[@earlmoorhead5555]

Yes only part replaced was esc everything else is stock

[@michaeljohnson254]

@@earlmoorhead5555 damn nice howa stock motor holding up with 6s does it get hot n shut down or is it best do 2 runs let it cool or what because ima do the exact same thing too mine

[@robertruiz5417]

Cordless leaf blower with you cools these cars fast

[@justindover8142]

That would be the sound of the slipper slipping because it's the mega version.. I just think the blx version would hold up to the power better Get a blx slipper!!!

[@earlmoorhead5555]

Innovation rc having the same tire issue as it’s good to find the limits of tire and all components slipper clutch is just not one yet 👀😳😳

[@tonysmith7989]

Wheel comes off.

[@travisdrury5556]

What green is that on limitless i really like it

[@earlmoorhead5555]

34p 30 spur

[@tor6333]

Are those stock gears??

[@earlmoorhead5555]

Yes

[@somethingbrutal666]

You vegas based by chance?

[@earlmoorhead5555]

California

[@somethingbrutal666]

@earlmoorhead5555 I thought those mountains looked familiar lol

[@patriotcontainers4349]

Those Hoons elevens suck. Get the dboot silvers and adjust the camber to 90degrees and you should pick up a few MPH out of them and they will last too, mine were cambered in for a few sets and just destroying all of them, straightened them out and im still lasting on same set and my car is going faster. Running mega infraction with all vendetta 3s 3900kv internals 50t/26t and hitting 73mph, also made a 3mm abs bottoms for the car with a splitter to keep air out.

[@earlmoorhead5555]

I did run the deboots later in the series when they where released at this point they were not available

[@randysmith1736]

Has anybody told you to screw the shocks all the way down to make them stiffer so the car won’t bottom out and that way your body won’t rub as bad either

[@allyoucando8486]

I think the weak point is to go to much voltage, and remember the only thing in parts are from arrma, the metal parts for now don't exist, that the first weak point, the vendetta is a good platform they exist much better

[@earlmoorhead5555]

Metal parts do exist from HR 👀👀

[@Lord_Pistachio_Nut]

Now wait.....is this 6s on STOCK electronics? Or did you drip 1/8 scale electronics in it? The "over volt" comment has me slightly confused lol.

[@earlmoorhead5555]

Esc swap only everything else is stock

[@Lord_Pistachio_Nut]

@@earlmoorhead5555 thats fantastic! I was arguing with myself between the vendetta and the limitless as my first REAL road car......I think you sold me 🤣💪

[@shamarcbahamas]

Is that on stock

[@earlmoorhead5555]

No

[@Bobsbargainbasement]

Diff?

[@earlmoorhead5555]

Slipper clutch in center diffs stock if that’s whatcha mean 👀😳

[@Pete100]

Motor mount.

[@galennii4794]

Hmm 🤔 maybe motor I think rear tire

[@reginalp1997]

well just one mile off thought the Wing was stronger than that

[@earlmoorhead5555]

I never even though about the wing as the limitless center wing never had an issue 👀😳😳