Easiest Boat ROD HOLDER Install Ever!! Learn This TRICK Now!!!

[@BornAgainBoating]

Check Out The New Gear!!! bornagainboating.myshopify.com/

[@Slobfishn]

Nice shirts!!!!

[@urielviveros9392]

Do you have any previous videos of outboard motors such as maintenance or common issues and what to do if you switch from freshwater to saltwater maintenance?

[@barry009]

At present, I don’t have any rod holders. I purchased a ski boat last summer that needed a little work before I could use it. My plan is to use it for fishing too. There’s lots of room for a few rod holders! I enjoy your videos, keep them coming. Thanks

[@wallycoon3454]

28 total rod holders and rocket launchers. 16 for albacore rods. Trolling, live bait, jigging and casting. My wife just rolls her eyes. 😅

[@patdghop]

I only have one rod holder on my boat and this video has given me the information needed to add a bunch more. thank you!

[@lovinhouse374]

Eight #rodholders but I need more! Flipping the rod holder over to find the correct drilling angle is a great tip 👍🏻

[@rickmcmorrow8829]

I only have 8 and need to add more. So this video was very helpful. Best, Rick

[@imanalien1984]

#rodholders 33 on a18ft Kenner...16 horizontal on gunnel wall (keeps rods off floor or out of the air when trailered or when fishing, casting). The other holders are used while fishing if necessary, most have something other than a rod in them or when a rod needs to be set down. 6 vertical in center console, 6 vertical on cooler seat holder, 2 vertical off front deck wall, 2 angled in rear deck, 2 on handrail on Center Console, 1 Railblaza next to troll motor on front.

[@firefightergarcia]

6 on my action craft. 4 in the console and two adjustable in the polling platform.

[@eddiesolis7599]

18! 6 on center console, 2 upfront on bulkhead, 4 rocket launchers and 6 under gunnel although only good for storing umbrellas and dive flag telescoping pole!

[@MrCybernick]

Yet another great video thank you .. As for rodholders only 6 at the moment.....🎣🎣🎣🐟

[@Reelhooked]

26 rod holders total, I think I’m good in that department but I can really use another fishing shirt 😎 Great videos, always informative! Thank you!

[@lifeofdave1237]

4 at the moment, but still renovating, by time it's done and ready I'll have at least 6, 3 each side, and possibly 2 or 4 across the stern. Maybe a couple at the bow on the rails as well. 😁

[@davidd8435]

I do not have access to the underside of the gunnel so I’m looking into a Scotty mount and rod holder to be a surface mount, thanks for the content.

[@josephkearsch7307]

Four in the gunnels and plan on adding more. I have eight on the top of the t top.

[@akusa3894]

Love the Channel! #13 rod holders and I need more

[@AtomicFront242]

0! New to the boating world and new to me boat. Thanks for the informative to the point video.

[@BornAgainBoating]

You're welcome! Glad to hear you're into boating! If you're looking to fast track your learning we have a Boater's Program at BornAgainBoating.com there is a 3 Years Boating Experience in 30 Days Challenge. It's about 30 minutes of courses a day for 30 days that'll teach you basically everything you need to know about boats!

[@jimpergamo9246]

Nice video! I've got 9 holders and a tri, but I definitely need more cup holders!!

[@maverickmisenko7234]

Only 3 #rodholders on my CC but planning to add 3 more as the spring progresses. Love the videos keep it up BAB!

[@travisupchurch3448]

Just had a few more ideas for some extra! Thanks!

[@dannyv2335]

I have 8 flush mount, 6 on the rocket launcher and 6 inside the boat for storage. I’m ok for now but I usually go out with 3 people.

[@jonathane984]

I have 13 vertical rod holders, 4 horizontal under the gunnels, and can fit a few more in my rod boxes. Really want a few more vertical ones though.

[@ronwallace7563]

I have a Bass Tracker bass boat and I only have one rod holder on my boat (it uses the VersaTrack system). I'm looking to add more as this system seems pretty versatile and there lots of options out there to utilize, if needed.

[@kishidabu]

I have 6 #rodholders that are permanent but I also have 2 that I can attach to the side rails if the need arises.

[@darianpitcher2683]

I want to instal some more rod holders along my funnel but I don’t have access to under the console. Anyone use self tapping screws and have hood results without the rod holder pulling out? Any tips appreciated

[@huntm7592]

Another great video we are up to 16 on our boat.

[@jackgonzalez4292]

28 total on my 23 Seacraft, and you are absolutely right, I need more lol

[@workingdiligently8458]

i got 6 in my little boat - two in the gunwales two bolt on to the console and two clamp on to the leaning post - for just me.. its enough.

[@bokettom]

I have 5 #rodholders flush mounted on each side, 4 on the back of the leaning post and 5 across the top

[@UrbanFisherman]

Looks like I'll be adding some more rod holders now.

[@brucekrupa3132]

Currently have 14 need to add more on gunnels

[@fishingfool2644]

On my 16 ft, I have seven rod holder. 2 rail mounted at the bow, 2 rail mounted stern and 3 mounted on the transom.

[@BornAgainBoating]

Congratulations @Fishing Fool! You're this weeks winner! Send me an email to [e-mail] with your address and shirt size and we'll send you out a fresh BAB shirt! Thanks for all the support on the channel!

[@marvinfigueroa1147]

Great video, i have 16 rod holders but sadly i currently only have one fishing rod.

[@RidgeRunner4X4]

I have 19 #RodHolders at the moment, but planning a few more up on the bow.

[@stevewood4255]

4 Rocket launchers on hardtop, 6 rod holders along cockpit gunnels (3 each side), 4 verticals (2 stern, one each side of hardtop), 2 trolling outriggers, 4 cup holders (2 on gunnels, 2 at helm). 22-foot Pursuit

[@bruceevans3554]

16 vertical and 6 horizontal. Need more!

[@hookednrolling2009]

Get gem lux best ever no screw holes have your local welder make a deep socket I made mine out of steel they are heavy 40$ maybe make out of aluminum into a socket a lot lighter they are out of I think pompano fl rod holder is 75$ or used to be

[@craigallan8667]

I have 6 rod holders, but looking to make it 10. After that, time to look at rocket launchers. Thanks for the Videos

[@Fireship1]

I have six flush mount #rodholders on my 21 foot Century. Two port, two starboard and two stern. Plenty enough for me!

[@MrOrnan]

How do I replace a cup/rod in an existing rod holder hole in my boat? How do I find the center and how do I drill an already existing hole to match the new rod/cup holder?? Perplexed 😢

[@BornAgainBoating]

With that big of a hole you should be able to double up the hole saws on the arbor, but here's another way to! kzbin.infokqRH0HXwKRY?si=Kik7jr3dgxF--ZGh

[@MrOrnan]

That is awesome! Thank you!!

[@JohnWilliams-rs1gv]

Right now if you count all of them there's 20 rod holders, some on the cabin, in the the cabin , on the stern, and the gunwales

[@aviadler4102]

I currently have 20 #rodholders on my Sea Hunt 219 Ultra. How many do I need?... At least one more!

[@Slobfishn]

#8 #Rodholders on my 1979 Renken love using all #8 them

[@MEGA_SOKO]

7 #rodholders but I certainly could use more. This was some great content, I'm trying to add more without making it look like a floating disaster.

[@lpdriftn]

As you said in the video not enough although I do actually only have 12 at the moment

[@johnclemente6615]

10 more than enough for me great content !

[@beksd9362]

I have four mounted on the back of my sea ray bowrider

[@miguelvelazquez6073]

I have 4 under the gunnels, 2 on the rails and 5 on the hardtop rocket launchers.

[@dustin9035]

#8 rod holders but I need more for the rear when running. The side console holders beat up against the boat when running, errrrr!

[@CapntainRon007]

4 rocket launchers on my tee top, 4 on my leaning post and three surface mount along each gunnel 14 total

[@chucktripp5722]

I love rod holders it beats holding them if the fish aren't biting...lol

[@nickp9981]

I only have 2 but its on a bassboat used on lakes and rivers.

[@randykane474]

26 rod holders and rocket launchers, with 2 Mate cup holders. As below, set up for albacore troll, jig, bait and casting.

[@augustjones4630]

I have 6 Rods holder need to add more.

[@gillesgomez3091]

Only 2 holders on my boat. I'm not into fishing so I'm not using them. They were installed by one of the previous owners of the boat.

[@SFROutdoors]

17 on my 17ft center console, you can never have enough!

[@WhiteHotMist]

13 total rod holders but only 4 actual functional fishing rod holders. The ole 05 2100sv didn’t come stock with too many! Back rest for leaning post takes up 2 as well.. love the channel. I wear XL! #rodholders #technitiontuesdays

[@syed0000]

Zero #Rodholders. Too busy top fragging.

[@robertsales3845]

12 #rodholders about for more if I use the yeti mounts

[@nicnowak823]

22 vertical and 6 under the gunnels

[@BIG-DIPPER-56]

Man,,, thanks a lot for that one ! ! ! 🙂😎👍

[@BornAgainBoating]

You bet!

[@jayzimmerman2257]

sadly have 2 cup holders that have the inserts removed to serve as rod holders.

[@djemdubb]

I have 8 #RodHolders and trying to add more, of course!

[@alanme1984]

I have 13 #rodholders now but I'm adding 3 more this week

[@marionguthrie2776]

4 mounted on splash well, 2 on the gunnel, 7 on the t-top for storage/trolling #Rodholders

[@benduea2713]

It’s all about rod holders and beer holders!

[@stoneman69125]

20 #rodholders in total. Including rocket launchers, gunnell vertical, gunnell horizontal, and horizontal in cabin

[@HughJazz69696]

That sir....is the correct answer...just MORE! #NotEnough

[@_noname617]

My girl's a good rod holder, never lets me down

[@keithanderson862]

6, can add more. Scotty holders.

[@marcosa.lopezjr.1313]

I got 16 rod holders an 8 cup holders to go with

[@lakeratatouille]

It's all about the angle of the dangle

[@dn9268]

#10, but I want 10 more. Love your channel, but this vid was waaay too quick & dirty, just punchin holes and slappin in rodholders. Folks need to know that 1) if their washboads are ply under the glass, they need to epoxy coat the exposed wood before installing holder with sealant to prevent water intrusion and rot when the sealant ultimately fails from weathering and stress under load, and 2) if their washboards are balsa cored, they need to remove coring and fill with thickened epoxy that seals the coring from water intrusion and makes a hardended puck that won't crush under the torque of a loaded rodholder. 👍

[@kevinhoffman8214]

great info 28 rod holders

[@evripidisefstratiou6814]

only 2. but there abou to become 4 cause i need a tent ......

[@MD-173]

WHEN I get my boat I will install as many as I can, without turning my gunwales into Swiss cheese of course !

[@bigdghost3319]

20 rod holders :)..... Now I can install the last one...

[@OfficerDave78]

I would be afraid to drill in a new boat to add rod holders

[@SniperViper198]

24 #Rodholders can never have enough

[@khalidhassan1562]

Thank

[@sebastianhead2723]

24 #rodholders on the 23 open…only one net 💪

[@devinparkinson915]

Just 4 on my kayak.

[@dirtyfish6238]

2 My left hand & my right hand.

[@techrfun]

I have 12 on a 20 foot boat.

[@dainperrault6497]

12 rod holders. 22 blazer bay.

[@johnathanwaldon4769]

My kayak has 5

[@ericdavi1231]

If there’s still room for another rod holder, then you need another rod holder!

[@TurfSurfer]

#rodholders #9 rod holders on my mako Back country!

[@chucktripp5722]

#rodhoders 5. It's a Hurricane not many good spots..

[@joesodaro5240]

I have 20 on my Cape Horn

[@pap91rt50]

Unbelievable!!! Are you sure there's enough fish??

[@acouey123]

22 #rodholders on a 22’ center console

[@Irbhxo2539]

#Rodholders 1 per foot, as a rule of thumb.

[@ryansavage2733]

#rodholders We have 4 running on 2 gunnel mounted tracks

[@jerseyfreshfishing6613]

Cool tip with the hole saw...btw you need a hair cut bro

[@fishingologist5074]

8 #rod holders on my boat. 21 ft

[@billwallenstein3387]

the most I ever had was 37 rod holders

[@fishingologist5074]

8 #rodholders on my 21ft boat

[@joethegiant]

I have zero rod holders.

[@mitchelcardenas814]

15 rod holders on an 18 foot skiff and I could use more

[@kentmelenich1870]

I have fifteen rod holders.

[@JimB-lm3zq]

6 #rodholders Love your channel