DIY Boaters MUST KNOW About This Stuff!

[@WesLovelace]

Outrigger and downrigger bases....key switch....electronics base...in gunnel rod protectors....navigation lights.....floor extensions...hatch covers....antenna bases...exterior trim....dive tank holders....seat cushion bases...internal wiring switches and fuse boxes....cutting boards....pliers & boga grips....fuel water separators...external rod holder base.... and dive platforms.....Can't get enough of this stuff.....LOL!! I realize now you guyze are in KCB.....You have saved my vacation in KCB several times in the last 25 years

[@lilrip2691]

PVC board has way better bonding when scuffed. Use fiberglass resin thickened with cabosil for bonding to wood/ fiberglass / carbon fiber surfaces. Use router to round edges then lightly sand with 220 to perfection. Also can be painted with epoxy when sanded with 220. I run mechanic dept. for a world class yacht builder and we went away from starboard and now just buy 4' by 8' sheets of 1/2" and 3/4" PVC board for all our mechanical/electrical mounts. PVC board is also cheaper.

[@kennyvelez8060]

How or where can we buy pvc board, I'd be interested in it for my boat,

[@john92214]

Kenny Velez Home Depot sells it

[@robertnicholson771]

I used pvc boatd from Lowe's to build a wake shaper. They had 8" and 10" nominal widths in stock. The pvc board is open cell so it floats.

[@ridered7262]

@@robertnicholson771 Very nice, I was thinking about doing that myself.

[@land7776]

Would PVC board be suitable to attach to back of a transom in a small boat, to secure a 25HP outboard motor? If so, what would I use to attach this piece to back of transom (it's aluminum, with 1.5" of plywood inside)? Thanks

[@RobB-vz2vo]

For smaller thinner panels of “Starboard” I buy cutting boards from the discount stores. It’s the same material (HDPE) with the same textured finish and a hell of a lot cheaper.

[@marklemist6928]

You can buy all the hdpe you want from McMaster carr.

[@mountainslopes]

My local boat store recommended this too for small projects!

[@bpadlows]

True. I’ve bought cheap 1” thick cutting boards from amazon for smaller projects in lieu of pricey Starboard. Works great!

[@jkg6211]

​@@norml.hugh-mann True. That why you buy the solid white or colored cutting boards.

[@HighDefinitionVideo]

I first saw king starboard about 30 years ago and was blown away at how awesome it is. Works better than wood, super solid, no maintenance the works. Love this stuff.

[@philmapockitz8216]

For panels & dressy areas I'm an acrylic guy. For cabinetry/structural components i use starboard & for cleats & reinforcements, mounting blocks to fiberglass etc. I use pvc board it bonds amazingly with 5200 and you can fasten (screw) your starboard to pvc. Also pvc board is available at HD & very light weight & inexpensive. You know starboard bends & is rugged but if you scribe the surface or score it well enough you can snap it clean apart. You can also router the edges, sand the texture off finishing with a 600grit & polish to a smooth shiny finish. With a gameplan, tools. determination, & creativity your possibilities are endless. Peace Y'all

[@BornAgainBoating]

Awesome comment!

[@captainjayc9217]

Do you need to pre-treat the PVC board with heat before applying 3M 5200? Please let me know. I am interested.

[@kevinwelch9940]

Marine-Tex also works great to bond starboard to fiberglass, wood, or another piece of starboard. I’ve used this without screws.

[@ubercai]

I just recently got into boating and being a snow plower, we have a high density plastic snow plow blades that is used for interlock driveways, instead of standard steel plow blades that is going to chip the interlock brick corners. Once these blades are worn down we just set them aside. But now I found out these can be used as an alternative for starboard. They are generally at least 1/2" thick and after fully worn down, is still at least 3 inches wide.

[@BornAgainBoating]

Nice!

[@corradomusicstands639]

Notes: learn to scribe in order to match an uneven surface......It’s simple to do - every carpenter/ tiler knows how - Your Starboard pieces will match any uneven/ curved/ or intricate shape perfectly..... Finally - running a straight, razor on edge (or run the edge through a jointer - if you have one) Razor scraping the edge of the starboard BEFORE you rout will give you a perfectly machined edge.... Best

[@BornAgainBoating]

Thank you, that would have been perfect in this video! :/ I didn't know how to scribe :( but now I do lol that's super simple!

[@JasonLefevers]

It’s a great product for marine applications. Tip: Never cross-cut any material using a table saw as seen in this video. Use a miter saw or a cross cut sled with a table saw. Very dangerous cross cutting against the fence like that.

[@kenk8215]

The most dangerous part was putting a hand on each side of the piece and using the rip fence. Never use a fence while making a cross cut and only keep your hand on the piece where the miter gauge is.

[@TheDoug9901]

@@kenk8215 SEEN A GUY IN HIGH SCHOOL zap off his fingers

[@kesselrunheroj8497]

Very good advice- I learned this the hard way in my 20's trying to cut a square panel on a table saw. Ended up with a bruised rib and a little meat missing from my index finger. Luckily there was no permanent damage ans all i have to remind me of it is a 1/2" long scar on my finger and no worse for wear. lesson learned.

[@datamack]

Does hdpe actually have a “grain” direction such that there is such a thing as a cross cut?

[@thomasking9524]

You will be pulling a board out of your spleen if you use a table saw this way. Due to the acute angle, it will grab and shoot back like a bullet. Use the miter attachment made for this purpose unless you like to bleed.

[@mtnbiker0205]

Bro you and Andy need to collaborate. Your content is better knowledge than almost anything on the tubes.

[@brucefuller5331]

HDPE can be purchased from anyone who makes poly furniture. in Ohio and PA there are many Amish companies who use this material for out door furniture. It comes in very nice colors as well.

[@michaelyarmas4423]

Starboard is a great product, used a full sheet (4.5 X 8) of Arctic White Starboard Anti Skid , to make a swim platform on the back of my 2455 Ceria overlayed over my small molded platform, cut to the curve of the boat. looks great love it!

[@vmonroig21]

I used it to make a transom /splash well on my boat no more water flooding the back offshore best 150 I spent

[@BornAgainBoating]

You'd be disappointed there lol Vanessa is a dude! ;) It's his ladies account :) lol

[@Spicy-Tuna]

Dash panels, bait tank lids, cutting board replacements. I use it for everything.

[@ericdavi1231]

I have a resident piece of starboard that lives on top of the soft spot by the helm! I bought the boat knowing it had a soft spot with the intention of fixing it. Five years later I’m still rocking the starboard.

[@BornAgainBoating]

Lol that's funny :)

[@ericdavi1231]

Born Again Boating ... are you sure you don’t need a new project boat for your channel and let me buy the ocean master. 😁

[@johnslonsky3956]

Awesome video as always. King Starboard is my favorite material of all time. What you can do with it and make with it is almost endless.

[@fmaalouf73]

Used this stuff to re-do all the hatches and cooler covers on a 1979 mako 17' . The fake "teak" covers were a nightmare. So around when buying this stuff, I found a local place that sell it 4'x8' sheet for around $120. Vs $30 or $40 at west marine for one foot square pieces.

[@Bikes_N_Adventure]

Local place you say?

[@AnotherDayattheDock]

you can plastic weld HDPE together try melting both sides together then clamping them and the welding the seam with a plaster welding souter or blow torch with a flat edge

[@jackofmosttrades9127]

That part of the hull you’re securing that box to is the bulwark. The gunwale is just the top edge of the bulwark.

[@francisaeb1980]

Made a plug mount for the trolling motor and attached it inside the anchor compartment.

[@BigWater59]

Great video. I picked this up from one of your other videos and redid my consol dash with it and it looks great. 105 adhesive works great on starboard.

[@Gmtail]

Another tip: I too use starboard for various things, mostly marine and with my CNC machine. One thing I’ve learned is while you can buy cheaper HDPE board, Starboard is of much better quality. I’ve had cheaper HDPE pieces sag, scuff easier and it generally doesn’t look as nice.

[@devinmartin7626]

I make art with starboard on boats as well as the polymarine board which is slightly more brittle. Routing and joining are also capable with the proper rpm tools and a good idea of how to keep bits Sharp

[@dharlow5810]

I've never used Starboard, but I use PVC boards for many things on my boat. It can be bought from the big box stores.

[@DirtMcGert29054]

I bought a tackle box holder from boat outfitters .... it wasn’t cheap but high quality , used it as a chair while cutting the hole in the console , I bet it could be used as a jack stand

[@nickp9981]

The “Stern Saver” transducer mounting block is has 4 or 6 holes in the side glued to the boat to provide mechanical adhesion with a 2 part epoxy. Just fill the holes with epoxy and leave a small hump at each screw hole and push it on they have been in use for years with no issues so I think it will work ok if there's a decent texture to stick too. If you need to glue down something to make a support to screw too get a 1x2 piece of vinyl trim from HD it is also waterproof but can glued down and screwed into.

[@mtwolf13a]

Try Plasticlad instead. Available in Maryland, Virginia, & North Carolina. It comes in sheets 3/8", 1/2'. 5/8", 3/4", 1' . 4X8, 4X10, &20 depending on thickness. A lot cheaper than Starboard. Basically the same stuff.

[@MIAthe305]

Instructions unclear - my girlfriend is very unhappy with her starboard engagement ring. Will try that JB Weld stuff next 😆🤙🏻

[@BornAgainBoating]

Lol ;)

[@tedsell1455]

Right on 🐸

[@RobB-vz2vo]

For smaller thinner panels of “Starboard” I buy cutting boards from the discount stores. It’s the same material (HDPE) with the same textured finish and a hell of a lot cheaper.

[@CorpseGrinder1967]

@@RobB-vz2vo i did the same. 5 years now and its still holding.

[@norml.hugh-mann]

​@@RobB-vz2voTAP plastics usually sells scraps of star board cheap...in seattle it's 1.00 for any size/thickness most about large book sized but great for small projects so cheap it's practically free

[@johnpatt9047]

I use a block plane on all the cut edges to remove saw marks. It makes the edges smooth like glass. Also use it to take down the corners on thin starboard. Thicker stuff gets the router.

[@michael931]

Thanks. No one talks about the edges. I wonder if a power plane would also work.

[@elianselmi4099]

Excellent video and tips! Love that Starboard... we used it in the DME industry to make side panels for tilt in space pediatric wheelchairs... solid material and long life :-)

[@Rob-Oh]

I glued a small piece to the bottom of my bilge with 4200 so I could screw a high water alarm to it. It's been holding strong!

[@gmngpbb]

Great video with lot's of info (as there were in the comments) but the guy cutting the piece on the table saw at 3:25 scares the crap out of me. I've learned the hard way not to hold the end (in this case the left end) on the waste side of the blade. You are inviting a pinch situation and kick-back.

[@erikrounds5847]

I actually used it as a base to fix my jumper seat in the rear of my sea ray sport. The seat is used as a “step” when you come up from the water and wound up breaking apart. Changed it starboard and haven’t had an issue yet.

[@jeremywenstrup3594]

OMG! I have some jump seat bottoms to fix too, and this comment was a game changer! I never thought about anything other than plywood to fix them with until now!

[@PFLEONARDI0906]

JB Weld Marine works well also…..

[@mahimahiaddictioncesargonz5445]

Hey Aaron Cesar from mahimahiaddiction. Orlando Florida, was there a week ago. I said hi. Had Carburetor issue. Keep the Great Job. Pay's Off in the long Run. Hard Work pays Off

[@BornAgainBoating]

Hey Cesar! It was great meeting you! Thanks for saying whats up! Sorry we couldn't help out with the carb issues :( but I'm glad you got it going!

[@mahimahiaddictioncesargonz5445]

Thanks. Got back to Orlando to my Mecanic and got it Fix the Right way. See you next year, July. Keep great Videos Coming

[@spanishjo4282]

It is indeed a great idea using PP to fix on boat but PP cannot withstand ultraviolet over time. I prefer acrylic although it is much brittle than PP. Normally area where it will be damage, I use a thicker white acrylic. Why I used acrylic because my good friend own a acrylic factory with laser cutting facility.

[@danny6935]

Great video, but the real reason you use a flame front only for a second or 2 is to change the molecular structure of the surface. You can do testing but you don't even need to Sand the surface If you apply the flame correctly. We use 3 M5200 with great results

[@esurcylimaf4335]

Not available where I live and if I found a supplier elsewhere it would cost more in freight than it's worth. Sad part of living in regional Australia with just a Bunnings store for anything hardware related. Cheers

[@Ken-fisho]

Its also pretty expensive here in Australia as well and like you said not readily available, even in Melbourne cheaper to use ply and then glass it for box's etc or perspex for redoing instrumentation clusters

[@BornAgainBoating]

That stinks, it's interesting the different things from different regions. Sounds like you can get acrylic easier

[@officialWWM]

These guys have it and will ship anywhere. Not cheap though! www.arnoldsboatshop.com.au/xl-marine-construction-board.html

[@jaredkennedy565]

Try Plaztek, just google them. Based at the Sunshine Coast in QLD but will post anywhere. I got 2x boards for my transom 150x450 for about $150 express posted.

[@bengeling590]

alot of plastic supplier sell a UV HDPE boat board much similar to Starboard. and alot od them will actually cut to size if need be. a few places in WA will do it for you.

[@screwascreenname2662]

Amazing goop marine or regular works great to glue polyethylene just sand it well.

[@paulduff2950]

Hi guys, l used this product to make a lid for my anchor well. It was easy to use and turned out great.

[@ianbardon8581]

I am just thinking about making a wake board if it's not too heavy. 10ml thick 140 x 46 cm. Just have to find some in Thailand.

[@OfficerDave78]

Very cool tips and tricks. Fun little projects to get new stuff to fit in your boat

[@jasondutter1]

I work with this material for a living and have done this for years. HDPE is weldable with a hot air gun. My boat has many things welded with this stuff. You heat it to a temperatures where it becomes gummy/sticky before it starts getting clear. If it is so hot that it becomes clear it will NOT stick to the mating pieces.

[@BornAgainBoating]

This is true :) if it gets clear or brown, you've gone too far!

[@JoseRivera-ko5uo]

Wow you guys awesome 🤙🏻 thank you for the video it’s good to know theses things are around

[@DaddyGoodstick]

Don't ever think your videos are a waste of your time..... You help many of us in many ways... :-)

[@BornAgainBoating]

Thank you!

[@TheNicko773]

I cut a new dash instrument panel this spring out of starboard. The old dash had etching for the toggle switch labels. I can't find new labels for my new dash at the moment and was looking for some ideas.

[@PFLEONARDI0906]

Try hard plastic engraved name tags from a Staples or Office supply. You can have a color background and color font. Then you can glue them on the dash panel with JB weld.

[@BornAgainBoating]

Yeah, what @Galileo Galilee said, otherwise I would say call boatoutfitters or someone like that :) You could also etch them in, but idk how good that would look :/

[@neoleomedia1676]

You know what’s really cool? The manufacturer of my boat (Tahoe) uses starboard for all the hatches anyways, best thing is that they are nicley CNCd with the logo on them. Nice stuff.

[@africaster]

@bornagainboating / @born again boating …. thanks for all your incredibly helpful videos! Question … 4 years on, how is the adhesion holding up? Appreciated

[@BornAgainBoating]

Great! Elastomeric is amazing, but it's also about the location and how much movement it gets

[@africaster]

@@BornAgainBoating thanks for taking the time to confirm. Excellent, another tool in the box. Cheers

[@darrelladams9145]

You can also use a machinist's "deburring tool" with different cutters to finish the edges. It's a cheap tool that can make nice edges quickly with some practice.

[@Kapnwill]

Older boats that have those swim ladders with the wood strips. Replace them with starboard. Built an electronics box on top of an existing center console. That resulted in a storage area where the botttom was the old top of the console. Now covered. It really is good stuff. It’s almost as dense as me !! 😛

[@TurreTuntematon]

Wouldn’t Star board become yellow by time? I would rather put nice teak lists.

[@KaoticFdr1]

I used it to replace all of the marine-grade plywood structures for the exterior upholstrey.

[@greganderson5653]

How is it holding up to weather vs marine grade plywood?

[@KaoticFdr1]

@@greganderson5653 there's no comparison. It will never rot. It's not as rigid as plywood but it won't crack or break either. I'd say it's about 80% as rigid

[@Kerriannecruising]

In the cabinet industry, I use it as a sink base liner or anything that gets wet in a cabinet.

[@bgonz3599]

Just wanted to take a moment to say thank you for your postings and all the great information you guys share. Besides being extremely informative your videos are well produced and entertaining. You guys are a must watch for the boating community! Thanks again and keep them videos coming.

[@BornAgainBoating]

Thank you!

[@johnwalsh6237]

I have found that HDPE is not very strong , sags after a few years in the sun, would you have a fix for this? Thanks

[@BornAgainBoating]

Put supports under it, but might just be using too big of a piece, which is why it sags :/

[@adamdeas232]

I love the starboard. And enjoy your videos im rebuilding my 78 rabolo cc at the moment and have learned alot

[@BornAgainBoating]

Right on!

[@rotfan77]

Starboard is definitely great material thanks for the great info on multiple ways to use it I especially liked the gluing to the gelcoat option. My question is where is a good place to buy starboard at a reasonable price? Thanks for any info?

[@stevenbass8674]

Great tutorial, I'm in the process of redoing my center console using starboard.

[@greganderson5653]

3. questions. 1. Can I use for floorboard on my aluminum chieftain I'm restoring? And can I install I/o carpet to it?? 2. Can I use to replace cabin bulk head?? 3. Where do I get this stuff?

[@BornAgainBoating]

1.) You probably could, it's basically the same as what a Triumph is made out of, but there are some set backs to doing this, being that it is plastic and over time with heat it can warp! Idk about the carpet attachment. 2.) Bulk heads, that is questionable, but just plain walls in the cabin, sure! 3.) Online or we have it at Home Depot here. So, it depends on your location!

[@Logan-ns7uj]

Another great info video - glad I ran across your content thanks!

[@BornAgainBoating]

Awesome, thank you!

[@k3v1nbf]

great video man! Iam still waiting the How to wire your own boat video man! Almost got all my stuff to rig my project, but iam waiting that video!!

[@thewrenchgarage7986]

This stuff is awesome. Put a piece on my gunnel and use it as a cutting board

[@Grottolova]

Wow, the comments are as full of great info as the vids. Only thing I've used Starboard for was the base of my homemade Stone Crab cracker. YUM

[@aleksandardimitrijevic4110]

Always looking forward "Wednesday" for the weekly video. (Australia) Any chance for a video on, what tools & spears to be kept on the boat. Cheers.

[@jayderwin1]

Aleksandar Dimitrijevic that would make a good video basic toolkit to keep on the boat

[@BornAgainBoating]

That's a good idea :) we'll keep it in mind ;)

[@kamoboko86]

Question. How many types of starboard are there? Or is it only one company with one composition? Also what colors are out there? I ask as sone who has never used it.

[@BornAgainBoating]

There are a few types, but king starboard is probably the best and I think it only comes in white and black

[@Nick_G7IZR]

Never head of it before, thanks for the Top Tip !

[@monkey2bize]

great video! How well did the JB Weld hold the starboard to fiberglass after some time and use?

[@hoyay850]

How do you clean it though? I use it a lot as well (boat tech as well). But if you get it dirty it is a PAIN to clean.

[@jayderwin1]

Bleach

[@williammcelleney1060]

How thick would you use for mounting gauges ???

[@JimHanleyfishing]

Great material and excellent video on how to make it your own!!

[@Fireship1]

Awesome vid Aaron! I knew about starboard, I just didn’t know how versatile it was! This video was chock full of great uses for starboard. Thanks for sharing!

[@MEGA_SOKO]

If you want a treat, check out Zoffinger, that dude makes some slick stuff out of starboard!

[@phillipjacobson4457]

What is the diffrence between starboard and uhmw plastic? (Ultra high molecular weight.) In a lumber mill I worked in we used uhmw for slick sliding bearing type situations. As a way to reduce friction between moving steel trays

[@michael931]

UHMW is a denser type of HDPE. it wears better in bearing applications.

[@vaun101]

Need to get myself some of this - cut down fabrication times for sure 👍🏻

[@alifetimeaweigh8426]

Starboard is amazing… It should be included in the spare parts list on all vessels!

[@cajunroadwarrior]

I used Starboard to make a custom hatch and new instrument panel.

[@Joeteck]

Dude.. i am a new boat owner.. awesome.. thank you!

[@BornAgainBoating]

Glad to help!

[@harmeiting8182]

Okay.... and.. what should I use on the port side?

[@BornAgainBoating]

Portboard

[@kdp360]

Makes for a great fish cleaning table top.

[@size-matters]

Can you encapsulate starboard in fiberglass in lieu of plywood?

[@bobuncle8704]

Excellent review. Thank you

[@jerichojoe307]

Yeah starboard is nice, but crazy expensive. Even ordering off of Amazon with discounted prices a 2 ft by 4 ft piece of the stuff at 3/4 in is nearly $300. Whereas an entire 4x8 sheet of wood texture PVC board is about 200. Not to mention it's easier to bond PVC because of glues that are made specifically for PVC. HDPE barely sticks to anything, and even though some epoxies will work with it, if you want to make a solid seam with a waterproof Bond you're better off with the PVC as there are specific cements that make the pieces into one piece like bonding acrylic.

[@FlexusMedina]

Afternoon..do you think this Starboard would do me any good if I was to use it as a floor board on a boat instead of the traditional flywood then fiberglass protection ?

[@KillinTimeHuntingFishing]

Great video! Thanks for the help

[@mavsonline]

Good stuff HDPE we have polycraft here in Australia have a look into it if you haven't already.

[@BornAgainBoating]

I've heard about them before, they are kind of like a Triumph here in America. They look cool, idk how well they perform, I don't know anyone that owns one though :)

[@mavsonline]

There's some videos of them here on KZbin check them out if you get a chance. I have a 5.3 warrior which I just purchased in feb and so far loving it.

[@NickYack]

Can this be used this to refloor your boat?

[@captainjayc9217]

That would be too flexible. If you want it to be stiff, you will need to use thick Starboard -- that will be too heavy. No, you don't want to do that.

[@NickYack]

captainjayc Thank you. I have a 1980 fiberglass Glastron. Any recommendations for redoing the floor?

[@BornAgainBoating]

No, I wouldn't do that :( when it comes to redoing the floor, sadly you need to cut it out reglass in new wood or coosa. I think Andy with @boatworkstoday has some videos redoing some floors :) that's a big job!

[@captainjayc9217]

@@NickYack I assume you need to redo the floor because the core material is rotten. May be you can see if you can get access to the bottom of the floor. I am under the impression that this is easier to replace the core from the bottom. Then you can don't need to worry about putting on the "finish". If you try to replace the core material from the top, you will have to refinish the surface -- that is a lot of work (sanding, sanding, sanding, and more sanding). Someone used to suggest to me that people can separate the top shell of the fiberglass boat from the hull, flip it upside down, replace the core material in the floor, put the fiberglass back, minimum sanding, and then put some primer and paint over it, finally right side up the top shell. I didn't do this way because that seems to demand a lot of equipment to haul the top shell out of the boat. I decided to work from the top, and that leaded to my comments about endless sanding. But you may want to ask the expert in this area to help you to redo the floor instead of doing this yourself _if_ he has the proper equipment and can do this cheaper than you can. Compare the price and see if this may be a better choice. Working from the top also has one problem: With the top skin and the rotten core material removed, all you have left is the bottom skin. The problem is that the bottom skin may be very thin and cannot support itself. Therefore, it cannot maintain the original curve of the floor. Then you need to figure out a way to support the bottom skin from below. This can be complicated. You only want to work on the floor from the top if the area is small. But you never know. When you open up the floor, you may find that the rotten area extends far and wide, and was coming from the source that you didn't expect. This becomes a big job and now you don't have the option of flipping the top shell of the boat because the floor has already been opened up. You are stuck, and you have to work from the top. Therefore, you need to correctly assess the extent of the problem before making the decision.

[@NickYack]

@@BornAgainBoating Thanks so much for the response. I checked out Andys channel, some really helpful stuff on there

[@2fast4you25]

It only comes in white ?? Or is there other colors, black etc. And if it only comes in white, can it be painted and what kind of paint will stick to it well ???? 👌👌👌👌👌👌👌

[@captainjayc9217]

I see it comes in either white or black.

[@BornAgainBoating]

Can't be painted :( but you can use PVC board if you want to paint a certain color :)

[@2fast4you25]

@@captainjayc9217 I seen the black pice but I was not sure it was the same material . 👌👌👌👌👌👌

[@jeffallspach3541]

It comes in 8 standard colors

[@riwm45]

That will be great for bath tub surround. A true life timer....Now how to seal the joints is the problem.

[@BornAgainBoating]

A plastic welder ;)

[@artsirx]

Hey, stay awesome! Have you ever seen it used as a bow pulpit for 25 footer? thinking .75 or 1"

[@MK-gd2ny]

Would this stuff be good to make a cutting board? Or too soft?

[@BornAgainBoating]

Yes, its actually what a lot of cutting boards on boats are made out of! :)

[@Olivsam]

Thanks technicians Tuesday very helpful!

[@thediplomasta5891]

A 4x8 sheet of starboard is $700. So factor THAT into your starboard project. 😅 Anyone who sells it should cut it down to the size you need, but it's still more expensive than wood. If you're worried about wood rot, then don't use softwood pine! You can build your project out of a nice hardwood, like red oak. Hardwoods don't rot. They're much more durable than softwood. Termites don't eat hardwoods. And hardwood is still cheaper than starboard. Just some food for thought.

[@WoodandBricks]

Awesome content! Thank you. The way you were cross cutting on the table saw is so dangerous!!! You are very skilled look at making a cross cut sled and some push sticks for the table saw. Your fingers will thank you and your cuts will be more precise!

[@BrianClunie]

Thanks for sharing I just Subscribed

[@BornAgainBoating]

Awesome thank you!

[@Extollo1]

I haven't seen anyone working with magnesium board yet. Is there a problem with magboard ?

[@BornAgainBoating]

Idk anything about it!

[@Extollo1]

@@BornAgainBoating very tuff, water proof fire proof, flexible, holds a screw, plenty of KZbin videos. I can't get starboard in Haiti. Any way,thought you may want to check it out. Blessings

[@harrystevens7003]

Can this be used for decking on a pontoon boat

[@BornAgainBoating]

You can buy non-skidded boards, idk if starboard makes them, but its basically the same thing that Triumph's were made out of. Idk how much of it you want to use when it comes to decking though. Just because it is a plastic, and in the sun, it can warp when used in huge pieces like that. :/

[@harrystevens7003]

I was wondering if I can re deck

[@Captain_Stevan]

Nice job bro! Finally I’ve found some content like yours!! Keep it up 👍

[@BornAgainBoating]

Appreciate it!

[@ryancavanaugh4479]

I would make a few cutting boards, from the looks of it.

[@Marc.the.Carpenter]

"Adhesive for starboard" I can't say about JB Weld (glue) that you mentioned. Nor 5200 which is a marine (sealant). I have no affiliation nor problem with any of the products I mention. But what I do know is that the best glue/sealant in 1 is the Swedish brand Sika. Construction Sealant, polyurethane product. I use it as glue and it sticks to everything. Comes in a chalking tube and runs at about $8 from Home Depot and others. Comes in White and Sandstone/Gray. This is the best Adhesive/glue branded as a sealant in the world in my opinion. It is my assumption that JB would crystallize over time with UV and/or minor heat. As all similar glue/adhesives do. Sika Construction Sealant "SCS" does not!!! SCS in my opinion needs 24 hours to bind together for lamination, or 1 surface to another and be workable. But 3 days to be rock solid forever, atmospheric temperature varied. Then your Starboard with SCS holding it, can be used as a block that gets screwed into to make a box, like you showed You tried JB I would insist you try my recommendation. Glue/Sealant in 1 that doesn't crystallize and become brittle.

[@BornAgainBoating]

I'll have to check that out! Thank you!

[@timoftheboat]

Who do you recommend to buy starboard from?

[@BornAgainBoating]

Depends on where you live :/ we can buy it here at Home Depot for $220 for a full 4X8 sheet, but I don't think it's like that other places :/

[@mikejohnson7601]

Where do you buy starboard?

[@BornAgainBoating]

Down here we have it at home depot :) everywhere is a little different though, so you'll just have to google it for your location