Impaktech Rear Sets / Crash Cage Installed on my 2022-2025 Honda Grom

[@troybilt6752]

Thank you for your time.

[@MuscleTeamOfficial]

This video is literal gold. Thanks I am following it while doing this job myself and I just got both rear-sets off and I have to call it a day. Bought some threaded carriage bolts from home depot, PSA, dont use a threaded shit bolt to chase the rear swing arm bolt. Just get another rear swing arm bolt and use it to chase it. I am gonna get back to my Impaktech Install project next weekend after my extra swing arm bolt arrives and I bet you I'm gonna spend half an hour trying to align the swing arm to the frame X_X.

[@joujimiichi1]

That looks fantastic man! I’m definitely looking into those rearsets now that I know they support the stock exhaust mounting location. Thank you for making this video!

[@Smallbore2wheels]

Whole set up look great together

[@LifeWithStiel]

LOVE the blue and yellow!

[@pdxktm]

Great install video! I have seen pictures online of that brake pedal bolt coming out on these rearsets. I'd recommend you loctite it

[@eastcoastish]

Good advice!

[@wichorides]

What size bullet connectors did you use for the brake switch? Can they be purchased on Amazon?

[@MuscleTeamOfficial]

New tip: Anyone who wants to have a license plate bracket work with this impaktech 12bar, you're going to have to thread the remainder of the holes in the impaktech 12bar. Dont do what I did by threading from the opposite unthreaded end, Just thread through the top with the existing thread all the way to the bottom of the bottom w/ a m6x1.0 tap. Good Luck. My MNNTHBX bracket needed to have holes drilled in it to align to the frame/impaktech holes. The Yoshimura bracket is already aligned. Not sure about TST Industries.

[@brendanflegle3326]

Do you loose ground clearance with the impaktek rear sets?

[@wichorides]

Can you link the bullet connectors, brake light switch, and the type of grease that should be used for the install?

[@devonjohnson6681]

How have the rearsets and 12 bar been after a year? Just installed both, wondering if it’s enough protection for stunting

[@terminatorone5524]

Sick!

[@MuscleTeamOfficial]

Anyone who's struggling with getting the spring on, remove the rearset with the brake master attached and press brake pedal down while hooking the clip back on.

[@eastcoastish]

Or use a spring puller tool…

[@MuscleTeamOfficial]

@@eastcoastish Yeah, aka my hooked retainer clip remover...

[@goldkid5000]

M 10 x 1.25 pressure switch

[@tyronetyrone7001]

What is the Mrs riding now since you stunted that Grom? Aiming for a 3rd grom?! Thanks for the video!

[@eastcoastish]

Maybe another Grom, or maybe the Dax comes out soon, or a Navi, or a Ruckus build? So many options 🤩

[@LifeWithStiel]

@@eastcoastish i say ruckus!!

[@cmjp23]

@eastcoastish, could you share a link for that brake pressure switch and the bullet connectors?

[@Tim.555]

Hey. To make balance point lower (the front wheel lower to the ground while in balance point) do the pegs need to be adjusted higher or lower?

[@wichorides]

So I took the plunge and order the rear set based on the video. Question, the rear brake light switch, why is it necessary to replace the stock one? Is it because it doesn’t work with the new rear-set?

[@eastcoastish]

Yeh, the stock one uses the spring plunger that doesn’t work with the aftermarket rearsets so you need to use an inline pressure switch. It’s a cleaner setup anyway. Let them know you saw my video too 😃

[@wichorides]

Yeah, I talked to Juan and told him that I originally saw your video. He referred me back to it for install cause he doesn’t have anything. Do you think you could shoot me the link on Amazon for the new brake light switch? BTW…. On a side note… I appreciate the videos you put out. I find them super helpful and informative. I will definitely have my iPad with your video up when I do my install. 😆 I’m not very mechanically inclined, but you make it seem pretty easy.

[@pbr1rbp]

How are you mounting your license plate with the 12 bar?

[@eastcoastish]

I just worked on that last night 😀 I had to take off a couple of mm on each side of the Yoshimura tail tidy and had to tap m6*1.0 threads on the other side of the 12bar but the result is great! I know Impaktech is also working on a solution of their own. Check out these pics: imgur.io/a/HTcBuEu

[@arthurluna8508]

Do you think the Impaktech Rear Sets offer any protection for the High Mount Dual Yosh Exhaust?

[@eastcoastish]

For sure, my wife dropped her Grom a couple of times and it was only the rearset pucks that got scratched. That said if you loop the bike, all bets are off.

[@arthurluna8508]

@@eastcoastish Good to know. I appreciate the response my mini moto brother 👊🏼

[@southfloridastunts3541]

Can you give some clear advice on what hole to put the brake spring in

[@asheredwards9506]

how are the clutch ups doin nowadays?

[@southfloridastunts3541]

I'm confused still about where the brake spring and the spring goes,is like stock or do you switch them

[@goldkid5000]

10:56 time. What did you screw the new pressure switch to?

[@YahmahaR7]

is impaktech going to update th rearset so th fitment is perfect without having to cut a hole en th triangle?

[@eastcoastish]

No they’re not going to modify it. It’s really easy to modify the triangle.

[@YahmahaR7]

@@eastcoastish is dur another way to modify th triangle without cutting a whole or is dat th only option?

[@eastcoastish]

@@YahmahaR7 it’s the cleanest way to do it. I’m not aware of another solution.

[@YahmahaR7]

@@eastcoastish oh okay, th anhks for th reply. thinking about getting dem for my 22 grom but i dont have th proper tools to cut a hole :(

[@PrelandRanger]

This works with the 2024?

[@eastcoastish]

Yes

[@joezumar536]

I have these on my 17 love them but they buzz and vibrate my feet are you experiencing this also?

[@zimdars9109]

Does the tyga exhaust get in the way of a passengers leg?

[@eastcoastish]

Not at all. If you watch the end of this install video you can my wife riding it and how it clears the leg: kzbin.info/www/bejne/Y6uUmaynntB8ac0

[@arthurluna8508]

Do you know if the 12 bar will work with the dual high mount Yoshi exhaust?

[@eastcoastish]

That combo definitely will not fit.

[@ramblinjay3816]

Where did you find the long bolt to send through so you don't need to worry about the realignment of the rearend?

[@eastcoastish]

It was actually just an extra piece from my Harbor Freight carrier. You should be able to pickup an extra swing arm bolt from Honda for cheap though…

[@ramblinjay3816]

@@eastcoastish thanks. And for the rear brake light sensor, do I need to buy a bracket for it somewhere? I found the sensor on Amazon like you said I just don’t know what I’m getting myself into 😂😂. Literally my first time working on a bike

[@eastcoastish]

@@ramblinjay3816I changed the connector to be bullet connectors to make it easier, you can connect it to the old wires however you want, it also doesn't matter which wire is which - they're just closing a ground connection. DM me on IG @eastcoastish if you have more questions.

[@karinahallinan5947]

@@eastcoastish hi, do you have the link for the brake pressure switch for the 22? Also what is better the long bolt thingy from harbor freight or getting one from Honda. What is that thing called? 😬

[@Botzz28]

Do they make these for the 2018 Grom

[@eastcoastish]

Yes.

[@andrewhulliberger1750]

they definitely powder coat everyones things just cost an extra 80$ its not a "just for me" deal like you said lol you're not that special brother. lmao and yea i know i have their 2021 honda cbr 600rr cage in the exact candy blue you have lol cost me 800$ for the subcage and cage, but they are super hard to get ahold of, they didnt send my rear subcage delrin pucks and i have not been able to get in contact since i received my order 4 months ago..

[@eastcoastish]

The powder coat for the Grom stuff isn’t standard, it’s only offered in raw aluminum or black anodized. They offer standard powder coat options for all their big bike stuff.

[@andrewhulliberger1750]

@@eastcoastish well I stand corrected. Thanks for the information.

[@warrenpeas]

500$ my god.

[@southfloridastunts3541]

Dude do you even know what your doing homie

[@eastcoastish]

Yes, what’s your problem?

[@Messymathews90]

1 YEAR LATER 2 YEARS LATER 3 YEARS LATER 10 YEARS LATER 20 YEARS LATER . TELL THE TRUTH . I HERD Impaktech SHIPPING TAKES FOREVER. BY THE TIME THEY SEND YOUR ITEM YOU WILL ETHER BE DEAD OR A OLD MAN.

[@eastcoastish]

I went and picked up in store.

[@p.kem4018]

Brooooo you just confused everyone with the rearsets! You have it flipped 😫😫

[@eastcoastish]

Lol, what are you talking about?

[@connorchops710]

I still think groms should not be street legal

[@eastcoastish]

Why not?

[@southfloridastunts3541]

Fag

[@reidspeed77]

🫐Edible rearsets,,,,Bon apátite

[@eastcoastish]

you always have the craziest comments :p

[@reidspeed77]

@@eastcoastish I'm creatively insane about my jc75 .....and monkey, monkey is God, immortal, but nothing to the Buddha inside you my friend.👌