Easter Graphics, Sample Laser Engrave & Cut, and Designing From Scratch!

➡️ Click on Show More↙️for the LASER RAFFLE and other Links!
The Raffle you've all been waiting for! The LaserMATIC 20!
➡️ lahobbyguy.com...
Get a chance to win the King of the Diode Lasers!
The Roly Automation Facebook Group:
/ rolyofficial
=======================================
Follow me on Instagram for behind-the-scenes pics and videos!
/ louisianahobbyguy
Shop my Amazon Store for focused laser products!
www.amazon.com...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
The Laser I use most frequently, The Roly LaserMATIC 10: King of the Diode Lasers!
➡️ amzn.to/3oIzOzp
AVAILABLE NOW ON AMAZON!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutf...
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Need to message me? m.me/105768145...
Check me out on Rumble! rumble.com/c/c...
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikeclou...
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com...
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com...
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com...
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
THE MOST REASONABLE DIODE LASER COMPLETE PACKAGE AVAILABLE!
👉 This is a special VIEWER ONLY package deal!
🔗 lahobbyguy.com...
Laser, Roller Accessory, Enclosure & Honeycomb Bed! $465!!
Take an ADDITIONAL 7% OFF with
Coupon Code: ➡️ HobbyGuy
=======================================
I want to give a BIG SHOUT OUT to all my viewers who are supporting me in this effort! Thank you SO MUCH for your support!
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/laho...
=======================================
Need to mail me something?
The Louisiana Hobby Guy
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com...
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com...
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroad...
[e-mail]
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwood...
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/...
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic10 #ortur #orturlasermaster2 #lightburn #tutorial #Atomstack #Aufero

[@larry4035]

Another FANTASTIC video explaining your design process with Lightburn Watching your videos has taught me so much that I've now started attempting my own designs - still long way to go to get proficient but your teaching has inspired me.

[@TheLouisianaHobbyGuy]

Great to hear that Larry! That's why I do this! 👍

[@cgalluze]

Hey Rich, as a newbie to laser engraving I thank you for the solid content! Keep up the great work, I just signed up on your forums. Thanks for having a resource for us new members!

[@TheLouisianaHobbyGuy]

Welcome aboard! And thanks for the support! 👍

[@tmarie6390]

OMG so happy I found your videos so easy to follow along!! Thank you for all you do!! ❤❤

[@TheLouisianaHobbyGuy]

Glad you like them!

[@kawertz]

if you duplicate the 2nd cross and then ctrl-select the hill before you mirror you won't have to mess with aligning the 3rd cross.

[@TheLouisianaHobbyGuy]

There's more than one way skin a cat Kevin!

[@deanturner1865]

Have you a video doing slate on a aufero laser 2 how do you prepare 🤔

[@TheLouisianaHobbyGuy]

I don't have an Aufero, but it's the same as any other job Dean.

[@dupescraftingdesign7872]

Why would u put it in the middle instead of a corner to save wood for another project

[@TheLouisianaHobbyGuy]

Because I use all of my scraps for earrings, so it doesn't matter where I put it.

[@lindenegan7951]

Hey mate, Linden in QLD Australia, I bloody love your channel mate, bought a bunch of your stuff from your website. Love the way you present your content too, I have learned a lot from your channel… keep it it, Cheers mate!

[@TheLouisianaHobbyGuy]

Thanks so much for the support Linden! Much appreciated!

[@robertstrickland1979]

i was designing and used the arrow keys and when i hit theup it jumped why up. i use the key quite often to twik movements. i assume there is a setting for this

[@TheLouisianaHobbyGuy]

Edit --> Settings --> Shape Move Increments

[@Essentialvideophoto]

Hi Rich. Year later but is good for every year after that at the same time of the year if that make sense. Awesome class as always and great tips. Im working on my Easter Bunny now. Thank you

[@TheLouisianaHobbyGuy]

Great to hear Bob. I have a last minute Easter file video I'll be publishing tonight.

[@SickFisherman05]

What a great video Rich. I’m sure this will get people interested in trying there hand st makes some of there own artwork. It’s nice of you to get them going on the basics of the lightburn software. Lightburn has so many features that most people never use because they don’t realize how things work. These videos really help. Every time I watch one I pickup a few more tricks you show us. Thanks again for all the time you put into these videos. I’m so happy I found your KZbin videos. Keep them coming buddy. You are truly a blessing.

[@TheLouisianaHobbyGuy]

Wow, thank you Edward! I try and add tips and tricks to each video.

[@David-ws6zr]

There is another way you can do this, but still rich explained it good ,if you select all then right click ,ungroup ,then select the outer area which will highlight, select offset it is the same thing,if you would like me to demon straight give me a showt,either way it will give you results,just giving you another example.

[@TheLouisianaHobbyGuy]

Thanks David! There are several ways to do everything in Lightburn!

[@thomassmith6373]

Great video , covered a lot of what I need. The only thing it not covered for me was when designing the bunny you could see the egg through the bunny's arm. How would you get around this ?

[@TheLouisianaHobbyGuy]

For this kind of advice, post to my forum Thomas: lahobbyguy.com/bb

[@opajan55]

Hi Rich great movie i am a newby too my question is don't you have too refocus before the cutting????

[@TheLouisianaHobbyGuy]

Yes you do. You can turn the cut layer off in the Cuts / Layers, run the job, then turn off the engrave layer and turn on the cut, refocus the laser, and then run the 2nd part of the job.

[@sandrahowes5066]

Hello, I am learning so much from your videos. They are amazing. I have been trying to register on the la hobby guy forum but I have not received an email. I understand your doing all of this on your own and you still have a day job. So it might take some time to get back to me. I have sent an email. Then I sent a second one because Im new to all of this. Even the computer. lol Could you give me some guidance or just a note to say you will get to me when you have time. Just want to make sure I did stuff right. Im good with waiting just not sure about what I did or if you got my info. thank you. Punkylee

[@TheLouisianaHobbyGuy]

Hi Sandra, I don't see your email, but I have activated your account! You can login now. Welcome aboard!

[@sandrahowes5066]

@@TheLouisianaHobbyGuy thank you so much! I'm so excited!

[@dennisruch5230]

THANKS FOR SHARING YOUR EXPEIENCE. VERY HELPFUL

[@TheLouisianaHobbyGuy]

My pleasure Dennis!

[@Silent-G]

There’s no way that I would watch any other KZbinr’s 48 minute video! I play yours at 1.5 speed and will go back and watch sections again if I need to. I always learn so much from your videos! Thanks so much Rich for sharing your awesome knowledge!

[@TheLouisianaHobbyGuy]

Awesome! Thank you! This was really two videos in one.

[@emanuelpelleg281]

Hi Rich. I totally agree with John Diego. Your teaching mode is really very enlightening and helpful. Many thanks. I noticed you drawing the rabbits eyes. No criticism meant - I noticed that it is not easy to draw a shape with curved lines, on Lightburn. Here is my question: There are those Drawing Tablets on the screen of which one could draw freely but also use a ruler and/or a French curve . Such Tablets produce some sort of digital files. Are you familiar with such Tablets? Do you have any knowledge and or experience with them? Do they produce files that can be imported into Lightburn for further processing and burning?. Many thanks. Emanuel

[@TheLouisianaHobbyGuy]

Yes they do! I use the Kamvas 13 tablet: amzn.to/3UTVQJM

[@emanuelpelleg281]

@@TheLouisianaHobbyGuy Thanks. I'll look into it. Have you made a video on how to combine designing on a tablet with Lightburn? I have signed up a membership with patreon just now in appreciation of your good tutorials. Emanuel

[@TheLouisianaHobbyGuy]

Thanks for your support Emanuel! No I haven't made a video on it. All I do is export them as a .png file.

[@CESAR_H_ARIAS]

Excellent tutorial.

[@TheLouisianaHobbyGuy]

Thanks so much Cesar!

[@CESAR_H_ARIAS]

@@TheLouisianaHobbyGuy oh Rich. You don't know how much i have learned with your videos. I have a full sheet diode laser working right now mounted on a Lorwrider cnc and its amazing. Already ordered a complete kit to build a 150w co2 laser (full sheet also)

[@TheLouisianaHobbyGuy]

@@CESAR_H_ARIAS Awesome! Join the Forum and show off your creations! lahobbyguy.com/bb/

[@peterforeman5738]

Great video thanks for your guidance and thanks for you new library for the M50 atomstack gave me a great starting point for settings, doing glass in now easy. Keep up the great work.

[@TheLouisianaHobbyGuy]

Glad to help Peter! 👍

[@jimbauer6822]

best lightburn vids on you tube

[@TheLouisianaHobbyGuy]

Thanks so much Jim!!

[@deanturner1865]

Your work is amazing dude

[@TheLouisianaHobbyGuy]

Thank you so much 😀

[@lorenzobatiste5120]

how do i download the easter files?

[@TheLouisianaHobbyGuy]

Click the link in the description?

[@jamescooper1991]

Very Good Thank You

[@TheLouisianaHobbyGuy]

Welcome 😊

[@narendra672]

East and West 👍🎄

[@TheLouisianaHobbyGuy]

North and south! 🤪

[@dilippatel4614]

great info

[@TheLouisianaHobbyGuy]

Glad it was helpful Dilip!

[@robertstrickland1979]

I really enjoy your videos, they provide me with the reviews of the laser machines. I also want to join the forum but i am having a problem logging in. i did send a contact me but i have not got anything back

[@TheLouisianaHobbyGuy]

Hi Robert, send me an email at [e-mail]

[@lbcsublimation4903]

New to engraving, so this was extremely helpful!! Glad I subscribed to your channel.

[@TheLouisianaHobbyGuy]

Awesome! Thank you!

[@JZee49]

You make it look so easy. I always learn something new watching your videos. You should be a teacher you have the demeanor and patience. I don’t know where you find time to do all that you do. Keep up the great work. Always very entertaining and informative.

[@TheLouisianaHobbyGuy]

Wow, thank you John! Always appreciated Sir!

[@johndiego3105]

Like the way you take your time to explain/show how you do the things. I really enjoyed how you made the bunny in just minutes. And as always I’m learning from your videos!!

[@TheLouisianaHobbyGuy]

Thanks so much John!😊

[@gayle3860]

Very good tutorial and video Rich! Thank You. Gayle S.

[@TheLouisianaHobbyGuy]

Glad it was helpful Gayle!

[@Cyphera59]

Always fun, Always informative :)

[@TheLouisianaHobbyGuy]

Thanks again!

[@keith1065]

Great content as always, thank you. Scary wabbit! 😁

[@TheLouisianaHobbyGuy]

🤪 That's what happens when you don't use a model!

[@Crewman2770]

Another good one and topical too. 👍🇬🇧👍

[@TheLouisianaHobbyGuy]

Thanks 👍 I love those topical breezes on my face Tony! 🤪

[@krisknowlton5935]

Rich, you could have grouped the ears and then selected the face and weld it all in one operation. But you knew that! Great video my friend.

[@TheLouisianaHobbyGuy]

Trying to repeat the processes as many times as I can so it sinks in Kris. Repetition creates retention 🤪

[@krisknowlton5935]

@@TheLouisianaHobbyGuy you are right about that. The other day I was trying to draw a five point faceted star so that every other facet would fill. What a brain burner. I spent about all day trying to figure it out. When I did, I started all over again. Try it. I would love to see how you would do it. It is not as easy to do as it sounds. It would make for a great video.

[@TheLouisianaHobbyGuy]

@@krisknowlton5935 It's all easy once you know how Kris. For that project, I would simply draw the star and then pencil draw the parts I wanted filled on another layer. Easy!

[@merrillalbury8214]

Where did you get the metal mesh for your diode. I ordered a 400x430 one 2 March and still not here.

[@TheLouisianaHobbyGuy]

You mean the honeycomb bed? I've gotten them from Alibaba (takes 8 weeks or so) cheap, or Amazon: amzn.to/3j4jEKh

[@merrillalbury8214]

I guess I still have a few weeks to wait. Ordered on Amazon. Still listed as shipped but contacted shipper and they said not picked up yet. Gofig.

[@TheLouisianaHobbyGuy]

@@merrillalbury8214 I would cancel it and order from another seller. The one I ordered on Amazon arrived in 3 days.

[@robertreda3082]

Been watching a lot of you videos.Great content and easy to follow and understand. Off topic is your website still taking members? Trying to get a reply with the code to finish registration Thanks Bob

[@TheLouisianaHobbyGuy]

A lot of email servers refuse mail from website scripts, but if you go to the bottom of the page and click, Contact Us, you can email me your username from there and I'll activate the account for you Robert.

[@robertreda3082]

Rich I’ve sent 3 emails through the website over the last couple days and don’t know if they are getting through or not. Seems this is the only way zi can communicate with yoy

[@TheLouisianaHobbyGuy]

No, they're not. I'm having a firewall issue. Just email [e-mail]

[@robertreda3082]

@@TheLouisianaHobbyGuy Rich Everything is ok with me. I was awaiting a code or something, apparently you registered me and I’m now able to log in and access the forum. Keep up the great work Thanks Bob

[@merrillalbury8214]

Fills in more tools. Thanks.

[@TheLouisianaHobbyGuy]

You bet Merrill! 👍

[@VintageForYou]

Another great video 😁👍

[@TheLouisianaHobbyGuy]

Glad you enjoyed it Malcolm!