Have used Easton arrows for 50 years….wont stop now…i don’t believe in the match grade for a hunting arrow… but nice those who do have the option from Easton… also that added cost for match grade is beyond my justification for hunting… but again I understand those of you who have deep wallets and the need to have that status…my elk and deer will die just how they have with axis arrows for years lol… apparently the internal organs don’t care what hits them… cheap or not…love the Easton arrows and company… nice job Easton… another’s great arrow to choose from in your line….also a great job to PJ….as always appreciate the video😊
@dougmeade941221 күн бұрын
Very cool to see Easton fletching hybrids. I’ve thought that vane profile should be the new standard for a while now. Much more clearance around rests and cable guards while being quieter than the short high-profile vanes of the past.
@stacyhardin6117 күн бұрын
PJ When will y’all have some 300 spine shafts back in stock?
@stacyhardin6117 күн бұрын
Sirius Gemini 250 and 300 spine …….. great arrows and if you move to 250 spine you don’t lose the purpose of a lighter gpi arrow. 300-8.65; 250-8.68….. super durable…. Tune and group great.
@rickydelcour847220 күн бұрын
When will they be back in stock/start shipping?
@LancasterArcherySupply20 күн бұрын
Which are you looking for? We have some now…..
@jfphotography6921 күн бұрын
Nice arrows, but a bit too light for my taste, probably nice for those long range Midwest hunters. Where I hunt in the east coast, in the woods with thick brush, with maximum distance being thirty yards, most of the time closer than that. I will stick with the Easton FMJ 5mm 400 grain, my arrows with the HIT insert and collar weigh 465 grains. When they hit the target, the target feels them.
@benjaminbagley416821 күн бұрын
You can build this arrow that heavy too and just put the weight in the broadhead and/or the components. End up with a much Higher FOC.
@jasonnester951420 күн бұрын
Thick arrow to
@nightstalkerzthermalhoghun84817 күн бұрын
Do they come in left had helical already made ?
@LancasterArcherySupply17 күн бұрын
They are only factory made Right Helical. You'll have to fletch them yourself or have a shop do it for you if you want LH.
@dougfriendt890621 күн бұрын
Will Easton discontinue the Axis 5mm Long Range arrows?
@dustinennis669121 күн бұрын
They don't make the long range in 5mm...its a 4mm
@dougfriendt890621 күн бұрын
@@dustinennis6691 I meant to say the existing Axis 5mm.
@feralgrandad442921 күн бұрын
Yep, it's one of their biggest selling arrows.
@CainSeldon20 күн бұрын
Doubtful, probably keep it for heavy builds, its too popular
@stacyhardin6116 күн бұрын
I know I’m repeating myself but why would Easton build a really good light weight GPI arrow and put a vane on it that weighs 8.3 grains each? Defeats the purpose of trying to get a great FOC by putting more weight up front….. the heavier vanes just offset that.
@LancasterArcherySupply6 күн бұрын
Just put 600 grains up front - easy solution
@pjreilly39976 күн бұрын
They chose these vanes for broadhead steering. I understand that you are very interested in your FOC. A lot of bowhunters aren't. (I couldn't tell you what mine is. Nothing I do with my arrow builds is aimed at FOC. It's all about accuracy.) So while you are looking at this ultralight arrow to help your FOC, many are looking at it simply because it's lighter and allows them to shoot flatter. Also… I weighed a Bohning X3, Driver 2.75 and Hybrid 26. To match the steering profiles, you have to go to the X3 3 inch which weighs 9 grains. The AAE weighs 7.4 grains and the TAC is 6.4. If you go to the X3 2.25, it weighs 5.6 grains but doesn’t have the height or surface area of the AAE that might be needed to steer a big fixed blade. So for steering, the 2.25 X3 might not do enough…..you’d have to go to the 3 inch to match the steering. I don’t think you’re saving as much weight as you think…..at most, it’s 6 grains total across 3 vanes….but that’s using a vane that doesn’t have the same steering capability
@stacyhardin6116 күн бұрын
Silent Knights at 6.8… 3” work great for my steering and so do the TAC 2.75’s To be honest they use those vanes because there is no prep and they are easier to fletch for mass production. They said that themselves. I’m not knocking their ability to steer a Broadhead just to heavy for me.
@pjreilly39976 күн бұрын
@ So with the Silent Knights you are saving 1.5 grains total across 3 vanes. With the TACs, 3 grains total.
@stacyhardin61121 күн бұрын
Not a fan of any AAE Vanes…. But to each his own
@andysmith829520 күн бұрын
and thats because???
@stacyhardin61120 күн бұрын
They are not rigid enough and tear easy when shooting into targets….. but the main reason is being a draw length of 31.5” with 29.25” arrows why would I put a vane on the rear that weighs 8-8.5 grains? That’s 25 grains that greatly affects my FOC negatively. Using a more rigid vane like the TAC DRIVER or Bohning X3 that come in between 5-6 grains I keep the weight minimal and put the weight where it’s needed…. On the front end and I can still keep my arrow between 465-480 and get my FOC between 15-16.5% with a 125 grain broadhead and a Podium Titanium 50 grain half out or 57.2 grain Podium HIT insert and collar. With the lighter GPI on the 5.0 300 spine I can be at 16.7% on a 460 grain arrow.
@douglasvaughn953020 күн бұрын
Agree, the AAE vanes they put on these 5.0 Match Grade are one of the heaviest vanes there is. Bad vane choice for this arrow.
@andysmith829520 күн бұрын
@@stacyhardin611 i have shot the max stealth vanes thru 3D targets, into dirt(Arizona dirt-lol) and carpet targets for several years with great results. I have nothing bad to say about them. Both 4mm and 5 mm arrows. They take a beating. I use Victory arrows and use the primer pen and their glue. Sucks to buy but they do good. Getting ready to test their stealth Hybrids on a new set of RIP TKO's.
@stacyhardin61120 күн бұрын
Like a said to each his own……. Every hunter has their favorites. For me I’ll stick with the TAC DRIVERS and BOHNING X3. Good luck to you. Just don’t understand shooting a lighter GPI arrow and sticking extra weight on the back end where it’s not needed.
@RichValentine197221 күн бұрын
$260 a dozen 😭 No thank you. My max range is 30 yards. I’m fine with the standard Axis arrows.
@pjreilly399721 күн бұрын
$205 for bare shafts
@RichValentine197221 күн бұрын
@ That’s fine, but to buy them from Lancaster pre fletched is still, $260. This by no way a bash on Lancaster, the industry and companies set the standard on pricing. People are going to say it’s because I can’t afford them, not true. I’m for the budget minded hunter. I feel the industry is getting ridiculous. Innovation is awesome, and yes cost goes up because of it. Maybe highlight more budget equipment for us, show us what real world average bow hunters can afford. I do like to see the latest technology as do most people, but there way more every day Joes buying equipment than there are quote on quote professional archers/hunters. Keep up the good work, maybe we’ll see more budget minded equipment.
@pjreilly399721 күн бұрын
@ So the reason we did a video on this arrow is because it was just introduced today…..When a new budget friendly arrow is launched we will do a video on those.
@stevie936120 күн бұрын
Mfjj said he made these arrows. Came up with it an all
@JimmyK-s2j20 күн бұрын
He didn’t say that. Ugh, you people.
@LancasterArcherySupply20 күн бұрын
I made these arrows. Came up with it and all.
@ryanmarkell414720 күн бұрын
This was a terrible review, the purpose of these arrows is not the speed game, but to be able to build up the front of the arrow to have a higher FOC without creating a 500+ grain arrow.
@cameronhansen596820 күн бұрын
It LITERALLY has "High Velocity" stamped on the side of it...