EASTWOOD POWDER COAT GUN MODIFICATIONS

LINK FOR DIFFUSER BELOW!!
This is not your average EASTWOOD POWDER COAT GUN MODIFICATION tutorial. I take it a step further by redesigning the diffuser to greatly improve the air/powder column mix and powder particle charging. I'm in the Amazon affiliate program and receive compensation when you make a purchase through one of my links. It adds nothing to the cost of this product, I just receive a small commission which helps my channel. Thank you for watching.
LINKS to my DIFFUSER KITS
EASTWOOD Diffuser Kit: www.ebay.com/itm/125686625341
HARBOR FREIGHT Diffuser/Mixing Tube Combo Kit: www.ebay.com/itm/125002819173
HARBOR FREIGHT Diffuser Kit: www.ebay.com/itm/124837009589
HARBOR FREIGHT Mixing Tube only: www.ebay.com/itm/124960721797
FAN NOZZLE-HF1 for Harbor Freight: www.ebay.com/itm/125161692424
FAN NOZZLE-E1 for Eastwood: www.ebay.com/itm/125161727758
EASTWOOD DUAL VOLTAGE POWDER COAT GUN: www.amazon.com/Hotcoat-PCS-25..."
SILICONE PLUGS for POWDER COATING: www.amazon.com/High-Temp-Sili...
CAMERA EQUIPMENT I USE:
SONY A7RIV CAMERA: www.amazon.com/Sony-Mirrorles...
SONY GM 24-70mm Lens: www.amazon.com/Sony-24-70mm-F...
If you liked this video then please LIKE and SUBSCRIBE!

[@johnjsweeney8121]

I just received my Eastwood Powder Gun Modification order. I used it today for the first time and was surprised with the results. The flow was extremely even from the cone and am very pleased with this Purchase. Thank you CycleFab

[@CycleFab]

Thanks for commenting and giving my product a good review. I've had a lot of very pleased customers with my Eastwood & Harbor Freight Diffuser Systems.

[@Go4BrokeOffroad]

Bought this item and use it on my gun. Worked as advertised. Fast shipping.

[@CycleFab]

Thanks, happy you like it!

[@danielbyers2281]

I drilled the holes in the exact place. Sometimes it works and sometimes way to much powder or none at all. I run 8-10psi. Everything else I've done you recommended has worked excellent. I need a little help on the holes. I have two guns and they both have the same results with the holes

[@CycleFab]

My contact email is: [e-mail]

[@troyhodulik5542]

Can anyone please tell me how to replace the cap on the Eastwood gun? I dropped mine and cracked the lid. I dont want to make things worse by not knowing how the siphon tubes are removed. Thank you.

[@Ricardo_Wade]

So today I had a little surprise, I used the same filter you have and it popped open while I was connecting it, just some advice connect the regulator to the hose/fitting then the filter between gun and regulator this put regulated air through the filter much safer

[@CycleFab]

Good to know, thanks!

[@IronHeadCycle]

I've been using the Eastwood guns for years, literally. I wore the first one out and with a little whining and bitching they sold me a dual voltage one for the cost of the base model. I've never put a lot of thought into them and more or less just accepted that the giant cloud of powder that came out of the gun would waste a lot of powder. I had a steel pan in the bottom of my spray booth, I collected the over spray powder and just used it again. BUT.... I do plan on using the Larry mods on my next spray job. Nice job... That little plastic disk they give you to use as a diffuser never made any sense to me. Maybe a liability thing to keep you from touching the high voltage rod??? The metal conductor diffuser just makes a lot more sense. More surface area to transfer the charge to the particles and a more directed spray pattern.

[@CycleFab]

Thanks for watching, you'll notice a big difference after the mods.

[@EasternShoreBroadcasting]

What regulator do you use that can adjust at 1lb increments?

[@CycleFab]

As of right now I don't. I read between the lines as best I can. I am going to try out some of the higher priced digitals or better graded dial reguators. At the moment i'm using a Kobalt.

[@EasternShoreBroadcasting]

@@CycleFab Thanks!

[@dlewis4647]

On the HF diffuser, does it just push on?

[@CycleFab]

The Eastwood Diffuser pushes on, while the harbor Freight Diffuser screws on.

[@urbanagolfer]

I'm interested in the diffuser mod, do you have a video of it in action so I can decide if it will work for my use?

[@CycleFab]

Here is just one of the videos that I have of the Diffuser being used: kzbin.info/www/bejne/enPNfqB8o6eXg5Y Also you should check out my Powder Coating playlist. Thanks for watching.

[@faustinomartinez707]

Exelente que costo tiene el equipo.

[@CycleFab]

$20.00 USD. You can find it on Ebay. Just use the Link in the desciption section. Thanks for watching.

[@eddiemorales1705]

Where can I find the brass deflector?

[@CycleFab]

It's a Cycle Fab design and we will be manufacturing them in the near future.

[@eddiemorales1705]

@@CycleFab Awesome. I'll subscribe to stay up to date.

[@louisward3654]

Where can I find the conductive diffuser?

[@CycleFab]

Here are the links: LINKS to my DIFFUSER KITS EASTWOOD Diffuser Kit: www.ebay.com/itm/125686625341 HARBOR FREIGHT Diffuser/Mixing Tube Combo Kit: www.ebay.com/itm/125002819173 HARBOR FREIGHT Diffuser Kit: www.ebay.com/itm/124837009589 HARBOR FREIGHT Mixing Tube only: www.ebay.com/itm/124960721797 FAN NOZZLE-HF1 for Harbor Freight: www.ebay.com/itm/125161692424 FAN NOZZLE-E1 for Eastwood: www.ebay.com/itm/125161727758

[@leviwoodring7587]

When will the diffusers be available ?

[@CycleFab]

Soon! I'm in the process of building inventory and a website. But if you need one now, just contact me through my business email [e-mail] and I will arrange for you to get one. Thanks for watching.

[@donbaker3526]

@@CycleFab ..how much do you get for the parts to make the upgrade on my eastwood duel voltage powder gun?

[@chaunceywebb7737]

How to buy diffuser?

[@CycleFab]

Click on one of these links for buying my Diffusers. EASTWOOD Diffuser Kit: www.ebay.com/itm/125056112853 HARBOR FREIGHT Diffuser/Mixing Tube Combo Kit: www.ebay.com/itm/125002819173 HARBOR FREIGHT Diffuser Kit: www.ebay.com/itm/124837009589 HARBOR FREIGHT Mixing Tube only: www.ebay.com/itm/124960721797 FAN NOZZLE-HF1 for Harbor Freight: www.ebay.com/itm/125161692424 FAN NOZZLE-E1 for Eastwood: www.ebay.com/itm/125161727758

[@LBCAndrew]

your comment about having the regulator on the wall and not knowing what is in the hose is just nonsense. if a hose has always been hooked up to a proper regulator/dryer , you know exactly what is in the hose. clean dry air.

[@CycleFab]

I have collected various air hoses over the years and have no idea what has been in them.

[@sll-tt6bj]

What the fuck is a kilovolt

[@CycleFab]

1000 volts.