How To Remove Rust with Rust Dissolver & Protect It with After Blast - Eastwood

[@jacobaguilar6756]

True question could you put the rust dissolve in a pump sprayer and keep the area wet for and hr or so and would you see results??

[@eastwoodco]

Rust dissolver is designed to work over a longer period of time. Overnight is all you'll need in most cases. We recommend either submerging your parts in a bath, or you can brush the gel on and cover it with some saran wrap. For quicker results, check out our Fast Etch.

[@jacobaguilar6756]

@@eastwoodco i already use the fast etching product absolutely love it!!

[@atgn70]

The main header picture on this video has a shot of you cleaning a truck frame getting the rust off....Where is this footage?

[@D2O2]

Nothing but phosphoric acid with an incredible mark-up.

[@sojuand7]

I use the $4.89 2 gal carton of white vinegar from Costco for surface rust removal.

[@johnreilly3765]

2 questions actually 1- would you recommend the same process with surface rust on sockets and wrenches? 2- can this process be used as spraying on underside of my truck?

[@chameiliu8418]

Which will be the best to remove rust on iron railings still with paint on?

[@thomasmcintosh3321]

Can this product work on imports. i here the metal on Honda’s from the seventies will destroy that type of thinner metal.

[@vileasphunk7789]

Won't used transmission fluid work as good?

[@mikaelgaiason688]

Would the liquid form be safe in common plastic containers? At the extreme end, I wonder if somebody could fill their cooling system with this and let it sit to clean everything. lol

[@md65000]

At 14:08 why did it remove the rust from only half of the piece? Is that rust on the right, or something else?

[@frankc1430]

What's up with the gray medal finish?

[@coodeville1091]

Whats the difference between After Blast and Fast Etch ?

[@JeanClaude555]

Hello I have acquire a older 2005 truck there is some rust on the truck because it is from northern are. I had the truck sp[ray with oil, however I think I should do more, you think I can undercoat now what should I do to best stop the rust, they drilled holes in the doors tailgate etc and spray inside anything else I can do ??

[@RaysLaughsAndLyrics]

Go to a Chemical Supply House and explain that you are removing iron oxide from a surface. They will be able to mix an acetic acid solution for a lot less money than these products. Vinegar has 0.4 percent acetic acid by volume. A 10 percent by volume acetic acid mix will do fine to remove rust from most surfaces. I used this mix to remove rust on small window panes and their steel framework in old school welding shops and foundries back in the day. Was done yearly to improve light level in those shops. Was more cost effective than replacing hundreds of small window panes. Applied with brush or sprayer you could see the rust dissolve from the framework and glass. Washed solution and residue off panes with ammonia. Then a final rinse with a water hose. Have used same acetic acid solution on sheet metal rust followed with an ammonia rinse and had good results.

[@doorran]

so how much does it cost for enough to submerge that header?

[@pigidly]

I would like to know if this can damage finishes? I have chrome wheels that have rust on them and would like to clean them off

[@eastwoodco]

Don't use this product on chrome wheels.

[@jameswilkins288]

what if you have a part with just a small rust spot on a painted item could you use this without stripping the item

[@ethanbible5264]

Which product do I use if I want to spray underneath my truck that is Rusted just spray it all over everything underneath the truck and pressure wash it off which product would work if any??????????

[@eastwoodco]

Have you considered Rust Encapsulator or Rubberized Rust Encapsulator which combines encapsulator and undercoating? Here's a link and you can also contact an Eastwood Tech to discuss the project in detail to make sure you get the right tools. 800-343-9353 - www.eastwood.com/eastwood-black-rust-encapsulator-paint-over-rust.html

[@ethanbible5264]

I want the Eastwood rust remover gel is there a place in Knoxville Tennessee that I can get it or do I have to order

[@Brady_Family]

I restore old farm implements and need something that leaves the paint on but takes the rust out. Will this work?

[@Skttrbrained2024]

Oxalic acid

[@atruefreethinker1944]

maybe instead of mentioning it was applied around lunch, you can say how long it's been in. because I'm watching this vid in July 2017 and that would seem like a long time since that was lunch in February.

[@eastwoodco]

It soaked for a few hours or less.

[@atruefreethinker1944]

thank you

[@zinzun95]

He said a little before 12 They are live at 3 every mon, tues, wed. So that’s around 3 hours. Common sense dumbass

[@thomasmcintosh3321]

He is a funny guy.

[@davesaam7693]

How about a rusted cast iron manifold that hasn't been worked on?

[@stevefriedlander7053]

With the phosphoric coating left behind , can I TIG/MIG weld it?

[@deankay4434]

+Steve Friedlander I have had no issues welding over a dried Fast Etch coating. I am a retired ASE Master tech and the 150A MIG I bought in 1984 works great using smaller gauge wire (0.30") on sheet metal lap-joints, plug welds and off-set flange joints I had sprayed with Fast Etch. I believe the remaining phosphoric coating is very thin film and presents not problem during welding. I do recommend a "Weld-Thru" spray coating on top of the Fast Etch (On the weld area & above - where heat transfers to) that helps prevent future rust. If I can get to the back side, I will spray a cold galvanize (CRC), then I will coat with a special spray gun / long hose setup w/tips, using a 3M type thin oily rust proof material inside the panel when done. When the rustproof material sets up & dries, I will wipe off anything that drips out drain holes / overspray with "Pre Clean" before painting. Lacquer thinner or Acetone will work also, but always use a proper Pre Clean product & tack rag before filler, primer or anything else goes on. It is amazing how many videos show metal repair on high dollar project cars & trucks, but they never talk about or show rust proofing inside as welding by nature accelerates the rusting inside and next to the joint. Just using a belt & suspenders approach in the rusty Midwest.

[@jnicev3797]

Can after blast be used just as a rust preventer? Or does it just have to be used after removing the existing rust

[@eastwoodco]

Here's some more detailed info: www.eastwood.com/eastwood-afterblast.html

[@alexmcdonough3622]

Link is dead 6/17

[@redrush40]

Can you use this rust dissolver in your Parts Washer 20 gal?

[@ildxnnyli5541]

Can I put this in my quad bikes fuel tank?

[@alburns9993]

does it work on chrome?

[@Nords1982]

Use coke cola

[@jackiefreeman8239]

Great stuff! I can really use these products!

[@nathanielbolden5053]

I need this for my G-body frame!...

[@llewvirtue861]

Why would you want to encapsulate rust

[@panchovillaz8004]

ok i wan puting me semi truck in conteiner to clean rusting

[@HostmorkeCZ]

jose guzman u wut m8, English?

[@andydaddy2009]

so I have to dunk my truck in a bath?

[@ClintonC1991]

Just drive it into a pool of this.

[@frankdenardo8684]

If you have to do a dunk. It would be for a total restoration job. If you have missing metal, you can buy parts such as rocker panels, floor boards, and miscellaneous parts.