EASY 4x4 piston door for Minecraft bedrock 1.21!

[@JoofStudios]

PINNED

[@rexplayz720]

This is the first video of tours ive seen, i watched a couple more afterwards and... You are my new god

[@OClurzxy]

When it's opening the 2 blocks on the right side don't retract Edit: Turns out I built it between 2 chunks which caused 1 redstone dust to not be activated. Fortunately enough, the spot for my 4x4 door on my survival base was 1 block away from the chunk border so it works well!

[@infinity_mc]

Yeah, chunks are a pain, but I’m glad you figured it out!

[@EmmanuelPlayz]

Keep it up 🔥

[@infinity_mc]

Dang a comment from a redstoner??? Thx

[@Logan109an]

really nice job!! these things are super hard to design!!

[@infinity_mc]

Thank you!

[@RedcraftOr]

​​@@infinity_mccool your tutorial but it's not the most compact 2 wide it's done but play well! kzbin.info/www/bejne/opnLZoGqZZKXlZofeature=shared

[@infinity_mc]

@@RedcraftOr I focused mainly on speed and closing and opening sequence. It’s not the most compact, but I think it’s the best looking in terms of the opening and closing sequence. But your door is very nice

[@RedcraftOr]

@@infinity_mc thank you and yes I noticed that your door had a nice animation 😉

[@Chazzezez]

Thanks this one actually works!

[@Saul_Goofman]

Thank you so much!!

[@queenb7562]

This is a pretty good build works for bedrock but I wish u would’ve went slower on the second half like you did on the first half

[@infinity_mc]

The second half is just a mirrored version of the first half, it’s exactly the same as the first half just mirrored so I just gave an overview. Sorry.

[@jamesmunro579]

Bro thank you for this, it was so helpful 🙏

[@howitizerthattypes972]

BRO SO UNDERRATED WHY DOES THIS MAN ONLY HAVE 468 now it’s 469 tho :)

[@bananaman4732]

He should be

[@BhbibobRL]

I was decorating and accidentally clicked a repeater up top and now it’s broken, how can I fix it?

[@infinity_mc]

just reset the repeater to its original state

[@BhbibobRL]

I know, I already tried but only a few work when opening

[@infinity_mc]

@@BhbibobRL maybe some other blocks got moved around when it broke, see if any blocks are in incorrect positions

[@BhbibobRL]

Ok, I’ll do that

[@hotsaucegaming9854]

Hey, when I put an object in the door works fine, but after I open it the item gets dropped into the hopper and then when I push the button again it the door doesn’t work anymore because there isn’t anything in the hopper. Anyone know how to fix this?

[@infinity_mc]

The item should make its way to the bottom dropper, that’s why it isn’t in the hopper, check both droppers and make sure they are facing the correct direction

[@hotsaucegaming9854]

@@infinity_mcok thank you for helping! I’ll check tomorrow!

[@arighasst]

what do you mean "solid block"? can u explain and give one example from the solid block?😢

[@bananaman4732]

Cobblestone

[@infinity_mc]

A solid block is any block that is 1. A full block. It takes up all the space of a block, so no slabs/stairs and 2. Is not transparent, so no glass or leaves. Cobblestone, dirt, and wood are examples of solid blocks.

[@racthet222]

One of my target blocks keeps on moving every once in a while for some reason, any idea why?

[@infinity_mc]

You just have to make sure all the circuits have the correct timings, there’s also a chance that you built it on a chunk border, which messes up redstone timings, what you could do for that is put some obsidian under the target block to keep it from being pushed, as well as some obsidian at the top of the door

[@djnitrogaming2170]

How come the target block suddenly moves in the video ?

[@infinity_mc]

A mistake I made while recording, I did my best to re recorded it and replace that segment but some parts are still the old footage

[@djnitrogaming2170]

@@infinity_mchi I’m tryna build this and I keep having problems, the left side pistons aren’t working. There’s some dust on the back left that’s not powering

[@djnitrogaming2170]

There’s two bits of red stone dust on the back left that isn’t powering even tho the other side is exactly the same and works ? Can anyone help please ?

[@Grassgrassgras]

make sure there’s no blocks where there shouldn’t be

[@Skeleton-n4r]

I love u

[@raenkord7881]

I’ve followed your instructions to the T and every time the spacing is one block too small

[@JoofStudios]

JEJSKXNDIJENSMCKCD

[@shirowd2759]

Can you do a door like this but with a chiseled bookshelf?

[@infinity_mc]

Like a hidden bookshelf door? I can do that

[@shirowd2759]

​@@infinity_mcyes, and also, i tried to make the door, it worked, but when i tried to activate it a second time, it broke, i made everything as you teached in the video.

[@infinity_mc]

@@shirowd2759 Make sure to check all the timings on the repeaters, even if one is not on the right tick then the door won't work. You can also join my discord server if you need more help. It's linked in the description

[@shirowd2759]

​@@infinity_mcoh ok, i'll wait for you to make the bookshelf door, i was trying to see if i could modify the door to make it activate with the chiseled bookshelf, thanks

[@vinyl_2784]

​@@shirowd2759make sure the hopper is feeding into the bottom dropper. I had issues with it not working but realized my hopper wasn't connected to the bottom dropper

[@F0xSH0X1]

Bottom 2 pistons are not moving on mine. Middle 2 of the 4.

[@F0xSH0X1]

Got them to work, but now some of the pistons don’t retract correctly, like the slime isn’t pulling it. Pulling out my hair now.

[@infinity_mc]

@@F0xSH0X1 you should double check all your timings, make sure they’re all correct

[@holytiger1234]

Can I put the button in the sides?

[@infinity_mc]

Yes, if you wire it to the input location in the tutorial

[@zpond3212]

Can I use the piston layout to make my own and still have credit to me?

[@infinity_mc]

yeah, this piston layout has been used in a whole lot of 4x4 doors, its just the redstone wiring that I came up with, so as long as the redstone is original, you can have credit

[@Ahmad8ppp]

2:53

[@BedrRedstone]

NOOOOO i WaNtEd PinNeD

[@JaiXyouseGamingOfficial]

Begger npc bot

[@BedrRedstone]

Bruh do you lack the ability to detect a joke or sarcasm

[@BarneyIsMyMom]

At least give credits to bow tie man he made it first

[@infinity_mc]

Um, there’s been plenty of people who have made a 4x4 door, even before the bow tie man. I don’t have to give credit to a person for making a door with my own unique redstone wiring. This 4x4 is my own design, the bow tie man has a different design.

[@BlueKirby808]

Besides, Bow Tie Man's 4x4 piston door uses VERTICAL and DOWNWARD semi-hipsters, but this design uses HORIZONTAL semi-hipsters. So InfinityMC didn't copy from BTM.

[@Fadded_then_ahoe]

Theres one piston that wont pull back a block😢