Easy & Affordable Firewood Rack Build!

[@christinashawgo6510]

I really like this! Thank you I need to build a couple of these this week. I know it’s November but I didn’t get my tree cut down until recently. And nothing has been split yet.

[@ricardofonseca4990]

PARABENS TOP 🤩

[@5150cash]

Dang that looks easy to build and so simple 🤔🤔🤔🤔. I can see a diy kit coming up.

[@TKCL]

Sold at your local Lowes 🤣

[@crazy8acres651]

Perfect timing! I just had a pallet of firewood delivered the other day. I built this wood rack this morning. Another great video.

[@TKCL]

Glad you enjoyed it

[@andrealewis909]

Just built this! Great video. One small thing, I needed a 7th board to cut smaller pieces from.

[@TKCL]

Exactly, I miss spoke by saying 6 boards. Thus the reason I typed 7 each or 14 boards total (for 2) at the bottom of the screen during the video. I was doing my best to let others know to get 7 boards. Hope it works well for you.

[@dougdavis4439]

Nice addition to the river property! I like the designs of both, each have their own strengths.

[@TKCL]

A much needed project for sure.

[@larryatkins4512]

Hello Andrew another good video

[@TKCL]

Glad you enjoyed it

[@jeremiahs45]

Nice simple firewood racks. Thanks Andrew

[@TKCL]

Thanks for watching

[@jperin001]

Have you thought about putting a soft edge on the front side of that tin, as low as it is? Maybe some pipe insulation. Might save somebody from having a bad day.

[@TKCL]

I have rubber edging for it.

[@samuelschult985]

Andrew, a couple of solar powered with infrared capabilities cameras we'll camouflaged would not be a bad idea on that area 👍

[@TKCL]

I already have some down there with more planned.

[@zeddgara1]

Those edges of the tin are sharp only a matter of time before someone starts bleeding, just score a 1x2 down the middle fill it with strong glue and mount it on that razor edge, or live dangerously with a partial scalping, either/or.

[@TKCL]

I have press on rubber for that edge.

[@mommaoinnh2674]

For the rack with a roof, rain doesn’t fall straight down. I would add cuphooks along the top that line up with tarp holes, and cover the 4 sides with a tarp. Then the wood will remain dry.

[@rockygrindstaff7312]

Excellent video. Glad I saw this.

[@TKCL]

Glad you enjoyed it

[@mercurymangarage6186]

Love it. So simple yet very effective. Great idea for my fire pit. Great video.

[@TKCL]

Glad you liked it!

[@rongray4847]

Good afternoon Andrew, your ideas are fantastic, when you do it, it just turns out better a nice easy moveable set up. 👍👍❤️❤️🇨🇦

[@TKCL]

Thanks 👍

[@kevinmahon4460]

Love it! Great ideas

[@MongoMotors352]

Quick and easy, nice design.

[@TKCL]

Thank you for watching

[@brucesumner6993]

Cool! That edge of that strongbarn looks like a good scalp slicing tool. If you had some old water hose.....

[@TKCL]

I have edging material for tin.

[@highstepperARF]

@@TKCL Hey Andrew, what kind of edgy material are you talking about? I’d be interested in that as I’m very tall and don’t want to cut my forehead. Thanks!

[@radmilamiljanic5977]

This is so easy and practical for use!

[@treepop1550]

Excellent and practical and concise video!!

[@TKCL]

Glad it was helpful!

[@HalfPint5811]

Awesome!

[@brucemitchell5637]

WOW! Very easy and very practical build , Andrew! Well done!

[@TKCL]

Thank you for watching

[@PJ-uv9fr]

Cool little project!

[@TKCL]

Thanks!

[@astikennel]

Lookit you all happy in your little beanie cap, LOL This is your season!

[@TKCL]

Love winter time!

[@bobgray617]

Very cool. I like the ease of setup.

[@TKCL]

No digging is always a bonus.

[@bobgray617]

@TKCL as someone who has spent the weekend digging out the water main and sprinkler pipes for repairs... all I can say is Amen!

[@robertmorris3919]

I like them both but I agree with you… the rack w/ the tin roof is my preference. Such a simple build, even I could do it! 😅

[@ryanzynda5114]

Awesome stand. That will come in handy for you. 🫠

[@TKCL]

Yes it will

[@woodintheblood4104]

The only thing I would change to the roof is I would just stack a second 2x4 on one end to make the roof lean to shed water.

[@TKCL]

Water will run off either way as soon as it makes a small puddle.

[@woodintheblood4104]

@@TKCL Until it won't and then there will be a small puddle left that will encourage rust even if the roof is made of a non rust material. No water. . . .no rust. ;-)

[@b-lopez394]

Nice and easy project👍. The only thing I would change is the location . I should be closer to the fire pit.

[@TKCL]

Happy wife, happy life.

[@kpatrickolivier2705]

You do know that the tin you purchased will give a little, so if you double that center roof support it will give you 1-1/2” fall each way. Keep up the good work and nice river property.

[@hrlee2381]

Everything you create is great. Your mind must be going a mile a minute.

[@TKCL]

I don't sleep well 🤣

[@CrystalParanormally]

It's 70 degrees and beautiful here today. No coats for me!!!

[@TKCL]

It's already warmed up here again as well.

[@MrBp8888]

Nice rack! Slip that kayak in and catch us a river bass on the ned rig.

[@jeboutdoors377]

Hello great videos love watching your videos. Great way to keep wood dry. Have you thought about cutting some of the small trees down in the creek where the fire pit is for great fishing area......

[@REVNUMANEWBERN]

GOT PLENTY of fallen trees here in Suwannee Co. Fla. although I don't have a need for firewood I hate to just burn it all up in huge piles

[@stuartkorte1642]

Nice easy design. If you have some seamers pliers, I would bend back the edge of that tin. Ask me how I know. I will do the 6’ height since I’m tall.

[@SuperBroop]

80+ degrees in MN today

[@CrystalParanormally]

I'd worry about slicing my head open with that metal over lapping. put on a pool noodle or pipe insulation?

[@TKCL]

I have some rubber edging material for tin.

[@pampilgrim2274]

Hi, Andrew! It is odd seeing you wearing a jacket and a head covering. Love the firewood rack.

[@TKCL]

Lol I now. Sadly it's already shorts weather again 😩

[@douglaslangham4417]

Sharp edge of tin @ head high......might be an issue .

[@TKCL]

I've got something for that.

[@ter450]

Nice setup. Especially since I just moved from Bradenton, FL to North Carolina last summer. I would probably put some 1"x1" trim to mitigate the sharp edges, rather than bending them down.

[@auciellon9871]

Hey brother glad y’all are good after the storm. What were those BT ear buds you recommended?

[@TKCL]

These are great and currently on $13 if you click the coupon code on Amazon amzn.to/4eJQCe5

[@auciellon9871]

@@TKCLthank you. Are the small ones what you went with? Not sure how to size them

[@highstepperARF]

⁠ Hey Andrew, what kind of edging material are you going to use on that metal roof? I’d be interested in that as I’m very tall and don’t want to cut my forehead. Thanks!

[@TKCL]

This is what I bought amzn.to/3A9Ctba

[@plumbbuild6517]

I know this is off topic but is your topdon thermal camera still working good after 2 years just wondering I had bought a different one and it was working great for all of about total of three hours and well I just sent it back and was wanting to get another one, the reviews were good on the one I purchased it was a Seek compact the reason I went with it was it’s powered by the phone it doesn’t have to be charged I may have gotten a bad one .

[@TKCL]

Mine is still working fine, but I don't use it often.

[@plumbbuild6517]

@@TKCL thanks brother I’m so happy for you and your wife having the new property, I used to own a place near blue springs and deer park bottling company

[@El_Estudio]

Live in Indiana, did this dude just open his video with the phrase, "Cold day in Florida"? What's the temp, 65?

[@TKCL]

It was 39 that morning, quite chilly anywhere. That IS a cold day for Florida.

[@joshohoro]

is the cabin going to be on stilts? i know alot of the cabins around our rivers are all on stilts incase of flooding

[@TKCL]

Yes, it has to be in order to get a permit.

[@hellinabucket3]

I like a lot of you videos, but this a massive overkill. Two landscape timbers @

[@brianmullins3805]

watch your forehead on that tin

[@TKCL]

I've got a rubber protector for that edge.