Easy Angle Mods! Ron's Toyota JZX90 Daily Drift Sled Gets Shred Ready.

  Рет қаралды 202,952

Hoonigan Project Garage

Hoonigan Project Garage

Күн бұрын

Пікірлер: 520
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
What chassis would you choose to be your Ultimate Daily Driftcar?!
@rickytickitavi2598
@rickytickitavi2598 5 жыл бұрын
I've always wanted to ls+rwd swap a 99 pontiac grand am gt.
@nitrokiller9959
@nitrokiller9959 5 жыл бұрын
Hoonigan Project Cars a 3rd gen Firebird. That’s slammed. Haha. Drift muscle cars are wayyy sick
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Yes. 3rd gens are a total win!
@1970HondaCL100
@1970HondaCL100 5 жыл бұрын
'64 Impala SS on Dayton 110's as a drift car. Yeah it's going to take some work, but you've got Danger Dan.
@vitoinostroza5885
@vitoinostroza5885 5 жыл бұрын
Y33 nissan cedric/gloria, damn i love that big girl
@rbeaton16
@rbeaton16 5 жыл бұрын
Casually dropping in that clip of the TEs before they were stripped was a power move. Ex-Gymkhana 3 wheels? No need to flex on us like that Ron.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Ron’s level of flex is strong, but the thing is we never seen Ron at full flex before!
@XskiXedgeX
@XskiXedgeX 5 жыл бұрын
I was like "hol up.. what a minute... Did you just strip the history off them TE's?"
@maxy2237
@maxy2237 5 жыл бұрын
pickle fork
@GiancarloFloyd
@GiancarloFloyd 5 жыл бұрын
Hell yea Ron's getting it done in one episode again the rest of the hoonigans need to take a page from this dudes book.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
That’s the only way Ron knows how to operate, from start to finish. We watched him finish two large pizzas once! The man is dedicated to completing task!
@joealex65
@joealex65 5 жыл бұрын
Finally the damn Green Camry is BACK! It's been a long wait but it was worth!
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Joe Alex Ron has been turning into a drift monster! Now after these fresh upgrade Ron might enter Formula Drift now!! 😉
@TheRwdyAudi
@TheRwdyAudi 5 жыл бұрын
If you check out @roncars IG bio he's got a few clips Jzx Camry😅 shredding.
@dylanhigginbotham5441
@dylanhigginbotham5441 5 жыл бұрын
not as long as it took scotto to clean one Bolt
@texaneric9491
@texaneric9491 5 жыл бұрын
This and Zac' c10 build are the best staff builds rn
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Zac needs to get his staff inspection to drop, because that man is doing crazy things right now too his C10.
@joshuawgarner
@joshuawgarner 5 жыл бұрын
I just figured out why Scotto hired Zac! He’s the only person to take longer to finish a project.
@therustteam
@therustteam 5 жыл бұрын
I'm simple guy. I see Ron's JZX in the title, I smash that like button. Keep Ron's and Dan's videos up.
@RonzarOne
@RonzarOne 5 жыл бұрын
🤙
@darquille
@darquille 5 жыл бұрын
I'm more convinced Ron is just Vin with hair. Already going through expensive wheels like they're Payless shoes.
@Foxtooth88
@Foxtooth88 5 жыл бұрын
I remember this car when it was posted on Japanese Classics. Love the way the build is going. Keep it clean!!!
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Foxtooth props to you for following the entire build! We wanted to make sure to keep the Camry simple, and drivable. While not trying to make it unreliable.
@kylephillips8780
@kylephillips8780 5 жыл бұрын
I need this for my family car. Daily reverse entries into the daycares parking lot
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
That’s family goals right there! 😂
@TheRwdyAudi
@TheRwdyAudi 5 жыл бұрын
And a way to end up on some youtubers compilation video of wild and insane act caught on camera....
@MiikeyLawless
@MiikeyLawless 5 жыл бұрын
Gotta say, Ron's JZX90 is low key the most dope car at the hoonigan garage, IMO
@1970HondaCL100
@1970HondaCL100 5 жыл бұрын
I'm just commenting to win Ron's Evo.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Ohhhh! That’s Ron’s baby. It might take a little more than that to win the Evo!
@RonzarOne
@RonzarOne 5 жыл бұрын
NEVER
@emanh4keem_san420
@emanh4keem_san420 5 жыл бұрын
@@RonzarOne bruh😂
@Mikado80813
@Mikado80813 5 жыл бұрын
It’s sooo soothing watching Ron work on his car. It’s like he’s getting stuff done and not rushing. Just making sure he does it right and good
@Vgk36
@Vgk36 5 жыл бұрын
Internet gold! this type of video series really helps people out in understanding what the products do and why they cost as much as they do and how to properly install them. Can't wait to see this project SHRED!!!
@ajolsen121
@ajolsen121 5 жыл бұрын
Who knew a scientist, and a mechanic who can get his car on and off the lift in one or two days. Cough scotto
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
It’s all movie magic!
@tobeurichard8969
@tobeurichard8969 5 жыл бұрын
nice cut on that FreddieGibbs track, dude is one of the best!
@Gentlemenhac
@Gentlemenhac 5 жыл бұрын
And it feels so goood, and it feels so riight
@curtisbranagan
@curtisbranagan 5 жыл бұрын
>"All torqued to spec" *30 seconds later* >sends bolt home with ugga dugga
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
3 ugga dugga’s = fully torqued right?
@curtisbranagan
@curtisbranagan 5 жыл бұрын
Doesn't matter if cross threaded, ugga dugga'd, or torqued to spec, tight is tight 💁‍♀️
@Lowcoupe
@Lowcoupe 5 жыл бұрын
Its 4. Take it back off
@McNasty43
@McNasty43 5 жыл бұрын
Probably my favorite car in the Hoonigan fleet.
@woddow
@woddow 5 жыл бұрын
7:04 editor always got the cranking beats 😂
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
You know we’re always dropping bangers on our edits now 😉😉.
@aserta
@aserta 5 жыл бұрын
By far, one of the sweetest rides in the shop, for us, more down, chill fellas. Ron put some noice work innit.
@RonzarOne
@RonzarOne 5 жыл бұрын
Thanks man. Love the low-key spec of this thing.
@lindarauton2701
@lindarauton2701 5 жыл бұрын
I need this to slide the fam around between grocery shopping and car pool lines lol
@RonzarOne
@RonzarOne 5 жыл бұрын
It's perfect for that kind of buffoonery.
@Mawgai
@Mawgai 5 жыл бұрын
Labcoat dropping that saturday heat
@badmontad
@badmontad 5 жыл бұрын
Love this car so much but ngl I preferred the bbs wheels but its your choice so cant argue with that.
@eneos2
@eneos2 5 жыл бұрын
Soo clean makes me miss my old mark 2
@OriginalRangsta12
@OriginalRangsta12 5 жыл бұрын
The soundtrack was straight thugging, and it feels so good.. 👌🏼
@risingstar1309
@risingstar1309 5 жыл бұрын
Reilly lmaooo you right you right
@mrc7966
@mrc7966 5 жыл бұрын
This is my favourite car in the Hoonigan fleet.
@100BeastMike
@100BeastMike 5 жыл бұрын
Ron your Build is Hard AF 🔥🔥🔥 I wonder how many subscribers are saving up for their personal builds or have already started and finished the build before scotto has done one. #MAKESCOTTOBUILDAGAIN
@thomasfowler2140
@thomasfowler2140 5 жыл бұрын
Those wheels are sick! And so is Ron's.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
This is a double yes!
@mikes9458
@mikes9458 5 жыл бұрын
I never heard that about the frequency of the hitting the ball joint, i usually just smack it as hard as possible til i giveup and use a separator lol "the more you know"
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Lab Coat Ron knows all the scientific tricks using sonar, radar and frequencies to knock any bolt loose!
@mikes9458
@mikes9458 5 жыл бұрын
@@HooniganProjectGarage and then he puts on OOG te37!? A man after my heart!
@colinspicer7079
@colinspicer7079 5 жыл бұрын
Digging the Ron build!
@EvanPonton
@EvanPonton 5 жыл бұрын
Best Staff Inspection yet! Can't wait to see this car evolve
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
We’re just waiting for Ron to put a big single turbo on it....
@matthewclausing3856
@matthewclausing3856 5 жыл бұрын
When removing ball joints I was taught to take the castle nut all the way off, flip it over, and screw it back down until it was flush with the top of the threads. At that point you can hit it with a hammer, and you don't mess up any of the threads. Pretty much the same way you removed the wheel studs. This might be considered the caveman way of doing it, but it's quite effective, and much quicker.
@MJTAUTOMOTIVE
@MJTAUTOMOTIVE 5 жыл бұрын
Only do that if you're in a bind. Always hit the third arm or knuckle sharp with a heavy ballpein hammer. If you hit from the top there is a chance you could bend the shaft of the ball joint.
@syin111
@syin111 5 жыл бұрын
Those TE37s were from Gym3 right ?
@Isaac-zz2uv
@Isaac-zz2uv 5 жыл бұрын
Yep! You can even say ken block written on them
@michaelswart9236
@michaelswart9236 5 жыл бұрын
Looks sick! In the words of Zack: "Ride, race, raise hell, praise Dale, F**k yeah! Don't suck!"
@Yakcm2
@Yakcm2 5 жыл бұрын
Labcoat Ron got some “Mad Skills” ... way cool, I dig it !
@matthewmcclain1316
@matthewmcclain1316 5 жыл бұрын
That thing runs smooth. Cool daily driver. Good work
@luisk6007
@luisk6007 5 жыл бұрын
Now it looks like a Camry with the Touring package. Progress!
@MullnerFab
@MullnerFab 5 жыл бұрын
I love the color of them rims. Black chrome has always been a soft spot.
@tubba525
@tubba525 5 жыл бұрын
#DopeYota Golf clap , A perfect example of the build being an extension of personality … #stayclassy Ron.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Appreciate that Tubba!
@davidblanck4131
@davidblanck4131 5 жыл бұрын
Love the color choice on the wheels looks awesome.
@reedstemen
@reedstemen 5 жыл бұрын
Definitely not too meaty, absolutely perfect. A little tire thicccness shows wisdom.
@EarthuserQc
@EarthuserQc 5 жыл бұрын
kickass wheels
@alecfleming373
@alecfleming373 5 жыл бұрын
This project has me into it actually... Kind of the same sort of car/build I'd do if I had my way.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
A simple street care with tasteful mods gets us every time!
@RonzarOne
@RonzarOne 5 жыл бұрын
Simple/effective mods are my favorite mods.
@alecfleming373
@alecfleming373 5 жыл бұрын
Roncar Frankly, I'd almost leave it just like that. Engine is a bit soft, however, tires will last longer, and the driving will force you to use momentum more. Better car as it is to learn on I would think.
@roguetorino
@roguetorino 5 жыл бұрын
That JZ just sounds so smooth
@andyyoung1210
@andyyoung1210 5 жыл бұрын
Beautiful Camry
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Thanks, it was Ron’s great, great, great grandmas first car.
@V8.77
@V8.77 5 жыл бұрын
Nice one Captain Ron. Wheels look slick 👌
@RonzarOne
@RonzarOne 5 жыл бұрын
Captain Ron is a phenomenal movie.
@V8.77
@V8.77 5 жыл бұрын
@@RonzarOne it is indeed good sir.
@ashleystokes7249
@ashleystokes7249 5 жыл бұрын
An episode of Ron is as close to a perfect episode as you can get 💯 but when does my new dad get his own merch?!
@Matty.Hill_87
@Matty.Hill_87 5 жыл бұрын
She's looking ganster now 😍 love the old jzx boats 👌
@bly2733
@bly2733 5 жыл бұрын
Wonderful car dude ! All you need is 2 10mm spacers in the back. Plz don't destroy this beauty
@devon08059
@devon08059 5 жыл бұрын
I like the BBS 3pc wheels so much more
@estyrodriguez4507
@estyrodriguez4507 5 жыл бұрын
Just know that I love you and you’re in my JZX Prayers #HailTheZED
@kzarnold3678
@kzarnold3678 5 жыл бұрын
Still rockin the Utah plates hell yea.
@asscrac4465
@asscrac4465 5 жыл бұрын
Love the moon eyes air freshener
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
JDM AF!
@asscrac4465
@asscrac4465 5 жыл бұрын
Hoonigan Project Cars my dad has a moon eyes shifter knob (O.G.)
@thomaswaldorf9141
@thomaswaldorf9141 5 жыл бұрын
hit them ball joints like you have a pair.Gezz
@lurchoheer208
@lurchoheer208 5 жыл бұрын
Ron your wheels look bomb af
@chetansingh3219
@chetansingh3219 4 жыл бұрын
Shut up
@aserta
@aserta 5 жыл бұрын
You also wanna hit the ball joint holder just a smidge oblique downwards. It helps a lot. Alternatively, so you don't create fatigue in the eyelet, get a tuning fork, they are cheap as cheap gets, and easily pop those joints out.
@MJTAUTOMOTIVE
@MJTAUTOMOTIVE 5 жыл бұрын
Tuning fork , Ball joint holder.😂😂😂
@SashaTromsa
@SashaTromsa 5 жыл бұрын
yo, 1:50 samples Madlib & Freddy Gibbs
@risingstar1309
@risingstar1309 5 жыл бұрын
Sasha Tromsa thuggin’
@bendelossantos8194
@bendelossantos8194 5 жыл бұрын
Hey man! I have a jzx90 mark 2 as well here in Denver! With the cut knuckles use is300 inners and gs300 outters and you’ll get a bit more than that!
@nitrokiller9959
@nitrokiller9959 5 жыл бұрын
Btw this is the sickest drift (grandpa) car ever!
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Totally! The Grandpa Sled throws down so HARD now...
@ludawg3224
@ludawg3224 5 жыл бұрын
we need more of this content its fire
@elimccowan1815
@elimccowan1815 5 жыл бұрын
That 4 door drift life thow. 😍 haha
@kassemlarsen7839
@kassemlarsen7839 5 жыл бұрын
This car looks very nice with this wheels
@Tjz30
@Tjz30 4 жыл бұрын
Can't wait to own one of these beasts soon
@ZackNakazora1
@ZackNakazora1 5 жыл бұрын
Amazing what some rims and lowering will do to a camry
@Erickridebikes
@Erickridebikes 5 жыл бұрын
Can't wait to see those BBS with more lip
@faizibrar7658
@faizibrar7658 5 жыл бұрын
The closest thing to perfection this channel is 😭😂
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
And Rons chaser 😉😉
@dyrteebyrds7212
@dyrteebyrds7212 5 жыл бұрын
I’m a fanboy of Ron... fak.. said I’d never be a fanboy... god dammit! The rip session at the end automatically put thoughts of tandems in my noggin.
@Cekmore
@Cekmore 5 жыл бұрын
Good work Ron! Looks sweet! 🐈🔥🔥🔥
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Ron’s Chaser Drip level keeps going up, and up!
@raceprep
@raceprep 5 жыл бұрын
Camry with Rota Grids....
@SamSchmidt90
@SamSchmidt90 5 жыл бұрын
Does Brandon make the jams? This video had sweet music. Also Ron you da man! This car idealic
@redlion145
@redlion145 5 жыл бұрын
No, they use free tracks from a guy called Retnik. Find his stuff here: kzbin.info They've also used tracks from other free producers in the past. I think Hert said at one point he typed "trap beats" into youtube and found gold.
@ciaranfox3765
@ciaranfox3765 5 жыл бұрын
Is300 tension rods will give you more inside wheel clearence straight bolt on for a jzx100 but for a 90 you will need to fit is300 LCA aswell because it has bigger bolts for the tension rod. All straight bolt on. You could also get some extended LCAs for more clearence while your at it +25 is nice on a street jzx not too agressive.
@RonzarOne
@RonzarOne 5 жыл бұрын
Dude. With the knowledge. Thank you 🙌
@ciaranfox3765
@ciaranfox3765 5 жыл бұрын
You can ask Danger dan how I know 😉
@jakeeclouse4799
@jakeeclouse4799 5 жыл бұрын
Looks so good bro.
@HooniganProjectGarage
@HooniganProjectGarage 5 жыл бұрын
Appreciate that Saucey, the JZX is now a solid drift machine.
@anthonyciccariello8089
@anthonyciccariello8089 5 жыл бұрын
Those rims are cool. I've always been a fan of BBS but I think the rims you have chosen fits a car better. Keep up the quality content
@josephbarnes3099
@josephbarnes3099 5 жыл бұрын
Great Lokking car, looks too good to be drifting
@GiletheCarGuy
@GiletheCarGuy 5 жыл бұрын
Nicely done!
@billychristmas
@billychristmas 5 жыл бұрын
That is one dope Camry
@CTemple82
@CTemple82 5 жыл бұрын
Yeah after you redo the barrels on the BBS wheels, have them refinished the same color as the TE37’s, maybe even with a satin finish... then put those back on.
@nyakio5511
@nyakio5511 5 жыл бұрын
When Rons does suspension work it’s a litework video, but when Scotto changes a bolt. It’s a multiple day project.
@hamiandtam1
@hamiandtam1 5 жыл бұрын
Ron quietly "droppin it like its HOT" meanwhile ! Wheres Scotto??? any1...... lol. love it boyz keep up the grind.
@65Coasty
@65Coasty 5 жыл бұрын
Good lookin wheels. Nice job.
@SMDFTB66
@SMDFTB66 5 жыл бұрын
Hell yeah ron! That thing is DOPE!
@StankLip
@StankLip 5 жыл бұрын
I love those new wheels.
@gianmadridiv
@gianmadridiv 5 жыл бұрын
Tips on drifting! Practice donuts and figure eights, then start linking f8's :)
@darrenliggett7222
@darrenliggett7222 5 жыл бұрын
Hey Ron, you should go for the LS400 front brake upgrade, 95-00 LS400's came with Sumitomo 4 piston brake caliper sand you can get them dirt cheap and as as good as MKIV Supra turbo 4pots ;-)
@SecretLizardMan
@SecretLizardMan 5 жыл бұрын
Highkey looks wayy better with those new wheels
@fourthpanda
@fourthpanda 5 жыл бұрын
Ah man should have left those TEs Gymkhana style!
@Sir.VicsMasher
@Sir.VicsMasher 5 жыл бұрын
1:09 OEM ball joints are designed to last 75-100k miles, MOOG replacements are designed to last 20-30k. If not they'd go out of business, its just like the Light Bulb Problem where they have to build in obsolescence since light bulbs can easily last 100 years.
@whocares508
@whocares508 5 жыл бұрын
Dam bro. Your Jz is iconic! I need one in my life!
@Dice_weiss
@Dice_weiss 5 жыл бұрын
Ron with that humble flex.
@M1keo
@M1keo 5 жыл бұрын
Damn the wheels and tires fit perfectly on the sedan
@hot_steppa_lifestyle
@hot_steppa_lifestyle 5 жыл бұрын
My dream car jzx90, the best yeaR and shape mark2 to me
@Xpexi
@Xpexi 5 жыл бұрын
The 90 getting the love it deserves! JZX slaps when??? ;)
@nich0lasjay642
@nich0lasjay642 5 жыл бұрын
Definitely needs spacers in the rear, but super clean man, looks fantastic!
@crispymayne
@crispymayne 5 жыл бұрын
Super nice! I always wanted to toss my dust covers for my brakes but never have. Any real reason they need to be on?! Wouldn't they breath better without them on??
@RonzarOne
@RonzarOne 5 жыл бұрын
These actually have a scoop on them that directs air onto the brake rotor. Dunno if it makes a big difference, but I've never lost brakes in this car.
@lucaswarren5947
@lucaswarren5947 5 жыл бұрын
Being real guarded with that burn yard footage, I hope we have some future video of the staff yard party.
@JSmooVE3990
@JSmooVE3990 5 жыл бұрын
I respect the hell out of this.
@tonyself6277
@tonyself6277 5 жыл бұрын
Yeah you will be having the front wheels rubbing on the castor arm right? You can swap them out for JZX110 ones which allow more clearance and bolt straight up. Also definitely get the roll center adjusters, they help a lot. Car looks dope btw
@RonzarOne
@RonzarOne 5 жыл бұрын
Yeah on full lock it grinds the inner barrel of the wheel. Will look into the arms and have RCAs coming in.
@likecars9639
@likecars9639 2 жыл бұрын
Nice car, love MARK ll 🔥🔥🔥🤩🚘🚗
@sebfiola5866
@sebfiola5866 5 жыл бұрын
Coolest camry ever
@RonzarOne
@RonzarOne 5 жыл бұрын
🙌
@chrisasaurus
@chrisasaurus 5 жыл бұрын
Wheels look badass
@jacobmiller9468
@jacobmiller9468 5 жыл бұрын
Looks great Ron, I like the fitment, I do NOT like extreme stretch it bothers me so much
Vin's S14 Gets Fresh Kicks, Coilovers, and Driveline
17:23
Hoonigan Project Garage
Рет қаралды 362 М.
To Weld or to LSD? Daily Drifter Problems Solved
15:21
Hoonigan Project Garage
Рет қаралды 255 М.
Мен атып көрмегенмін ! | Qalam | 5 серия
25:41
VIP ACCESS
00:47
Natan por Aí
Рет қаралды 30 МЛН
So Cute 🥰 who is better?
00:15
dednahype
Рет қаралды 19 МЛН
Auto to Manual Swap: Twin Turbo JDM Sleeper Goes Five Speed. Ultimate Daily Driver?
20:26
How to install an angle kit on a Toyota Chaser
16:30
Drift Junkies
Рет қаралды 1,3 М.
The JZX90 Street Build gets NEW parts!
9:03
Just Driven
Рет қаралды 2 М.
We Bought Two V12 Legends For Less Than A Toyota Corolla
39:39
Throttle House
Рет қаралды 817 М.
BMW M3 Goes on a Lightweight Mission: Fresh Wheels and Big Brakes
21:04
Hoonigan Project Garage
Рет қаралды 299 М.
400 Horsepower in a Box - AND it's Smog Legal? Our G35 Gets a Supercharger Kit!
15:29