Easy Barn Doors For A Bedroom Closet

[@MaleficaRue]

damn, not only am i impressed about your woodworking skills but your video shooting skills also deserves an applause! amazing

[@melissah3772]

Wow the editing and filming is so impressive. I love the little instructions written on tape or on the wood. Super cute and pleasant to watch!

[@vannava0683]

My father was a handy man, I miss him so much. I know he would be down to do this project with me.

[@CampbellSuperKids]

Same here. I miss mine so much!

[@skyygirl622]

This editing is Wes Anderson coded. Amazing work from the teamwork, to the job, the music, instruction, & of course editing. Amazing. My spring project is doing two of these.

[@realisticholistics]

Uhg and I love that it's two doors that open to a full view of the closet!! So good yall!

[@annwangatnt]

kids are so cute, you are a great dad.

[@nivedmurali8523]

I liked this video for involving your children in this project,that made me more personal to this video,great thing Mr.go ahead we want more videos like this

[@realisticholistics]

Love the vibe of this straight-to-the-point video with the music and all! Thank you so much for the inspo!

[@blakells]

This is one of the best edited videos I have ever seen! You convey so much info with camera frame and written word that it’s a pleasure to watch. Please get into major motion pictures, haha

[@Rigus208]

Ty for sharing, learned a lot . What a precious young lady.

[@marisarosas9503]

Your family is blessed to have a handy papa!

[@tamimorales1116]

Definitely cut the groove before assembling. But the absolute best part of this video is your daughter at the end😊❤

[@mahmoodkhan6623]

it,s hard to do everything alone. more power to you. OMG, you're daughter is so cute

[@AP-nb6og]

Great video and the doors are beautiful! Your kids are blessed to have you:)!

[@hascjl]

I really like the style of shooting/instruction.

[@saafcamp]

Great work. Groove in bottom... Measure out pre assembly cut into pre install. Attache to door frame with groove already made. Circel saw or router. Also wet paper towels under all drilling collects dust.

[@dawnchesbro4189]

Thank you! Seeing him on top of a ladder using a circular saw mostly above his chest made me so nervous! I wonder if just a plunge router would also work for the groove?

[@saafcamp]

For sure danger! Always better to work on a smaller more manageable piece at grade level than risk adjustments with heavy ones while elevated. All considered... Well executed! As for the end blooper... Danger!!! Lucky no fall on little one. Always secure while staging. Literally anything can happen. Wind. Kid. Dog. Ground hog avoiding bird of prey lol... Anything

[@LisaBlinn-o4b]

Wow, they look great! Cute kiddos!

[@GadgetsandGrain]

Thanks so much! 😊

[@barbaradavenport8166]

I love how you showed all the details. You have answered all our questions. Great music and helpers too.Thanks

[@dorav1775]

You’re amazing! This is awesome! Thank you for your workmanship all around, superb!

[@925riv]

Wow you just gave a great Idea on how to put up a barn door for my daughters apartment. Thank you and great job.

[@anthonycaldi7056]

I would do that groove at the bottom of the door on the tabe saw as you did for the plywood panel. I would cut the groove out on the precut frame (lower piece) prior to assembling the door.

[@altagraciaoquendo2580]

Thank for sharing loved especially working with the kids God Bless

[@dreamingcode]

So amazing to do this with kids.

[@clementcharlebois]

Cut that groove with the table saw before assembly, or cut the groove with a small trim router and a guide if already assembled.

[@mrmarkfive]

Clément Charlebois I agree. A small trim router and slot cutting bit. Easy.

[@Wisdom2812]

Awesome video, thx! just what I was looking for! (and beautiful family!)

[@davidjohnson6616]

Very nicely filmed. Great job. Use a router for the groove. But doesn’t matter if you can get the job done. Groove is in the heart!

[@68grush]

Well done. I’m fairly handy, but your level of clean work is quite helpful. I’m hanging my doors today! Wish me luck

[@GadgetsandGrain]

Good luck!

[@johnrodriguez5737]

Dude, Great job. you make it look so easy. Even i can do it.

[@JBPRUNTY]

great video brother .. .very informative .. , love the ending !!!

[@dwightfontenot9064]

So well produced! Great vid!

[@LuxuryLeah]

Father of the year 👍🏾👍🏾👍🏾

[@andrizeefoshizee]

Great work! I love this KZbin Channel!

[@usedcarsokinawa]

Great idea, great video! I’m getting ready to do just this

[@descripciones1445]

Amazing job you did for your daughter! You are a master carpenter!

[@sarahdewitt1973]

Im going to start building a barn door for my daughters play room and this helped a lot! thank you!

[@jamesblake1848]

Nice video the ending was perfect because some jobs are not without an accident or two 👍🤣

[@EricGreniervideo]

Great job. Kids are so cute!

[@Santinox3]

I love your tutorials, so informative with the details!!! Thank you! I'm a new fan!

[@chrisj9008]

Great info and great pace in the video. I will add... I put the grove in after and I forget to remove the screw... I was building a door for a TV cabinet with barn doors... needless to say my blade was not happy....

[@תמירפרוידנט]

Such a good video. Perfect

[@lafn63]

Great job dad!

[@hankandrox]

GREAT video by the way! I’d love to do this but don’t have the tools. Circular saw is about all I have. The end of your video would be my WHOLE video 😂😂

[@leonardattard3790]

Excellent workmanship. Great video demonstration. With respect to making the grooves for the door to slide on the bottom, I would suggest to groove them when you have cut your two vertical and one horizontal rails before you glue the panels, just saying. Hope that makes sense

[@davidcoleman6995]

Nice work!!

[@anthonyswiinger1455]

Great job

[@anthonycaldi7056]

Looks Amazing...Well Done!

[@kaiemnace]

Woodwork + Details 👏🏻

[@Omagoodness2015]

Great job and great tutorial. I will be using this for sure. Thanks.

[@flaviopagliero301]

Great job! looks so good.

[@tdz69]

Brilliant build keeping both sides the same. Many doors only have the decorative bracing on one side.

[@dannygibson523]

Great video, love the kids. I’ve been using the roller wheel floor guides, just because I don’t like cutting the groove in the bottom

[@Honeybee-Hedgehog-Designs]

This is great - thank you

[@Livindaybyday]

Love them. Great job!

[@frontlinefinishcarpentry4193]

You did a really good job there buddy. 👍

[@WediOrphan]

Great work dad

[@dazeyknows6736]

If you leave the door trim on it helps close the side gaps - works well. Good job tho ❤️👌🏽

[@hottrizzle]

Great video...

[@ew5044]

You do nice work.

[@jorrba3934]

Your door turned out great! My wife wants me to build a Barn door between my bedroom and Master Bath. This will be my first time building one. I been watching so many videos trying to decide the best but easy way to make one. I do like the fact that your door has the two frames on both side. How thick did your door turned out to be?

[@wesleyedmonson8151]

Very nicely done. What was the size of your top casing board?

[@Tigerratcat]

Hi nice video. Can you advise if the new Trim can be flush mounted to the jamb? Or is it better to have a few mm offset reveal. Why isn’t it normally ever done flush? Is it so there’s a recess for the gap filler?

[@Msteeka1]

What brand pocket hole jig is he using....We need it!😂

[@timrosandick491]

nice job

[@happy023]

I really love the idea!We are in the process of renovating and I wanted to incorporate that in our design but a pantry though. You think 4 ft deep × 7ft long enough for double barn door? Please advice, thank you!

[@kylehhotwork]

Looks good.

[@Rhmcmlxii2]

Nice 👍🏻

[@YESSLEEP42]

Looks good!! I plan on building me some here pretty soon!

[@mundlkalli4396]

GREAT VIDEO, DEMO AND SIMPLE BUT VITAL EXPLANATION. THANK YOU VERY MUCH !!!!!! QUESTION......DEPENDING ON WHAT SPACING IS REQUIRED ON THE TOP WHEN INSTALLING THE RAIL. LETS SAY IT CAN BE BETWEEN 1 3/8 -1 3/4 BUT THE THICKNESS OF THE DOOR IS ONLY 1 1/4 ....CAN YOU JUST RUN A BOARD ON THE TOP (BACKSIDE) WITH A THICKNESS THAT WOULD FALL IN THE REQUIRED RANGE. ??? THANK YOU AGAIN

[@GadgetsandGrain]

That should work. Good luck!

[@gersoncr2124]

Great job 👍

[@mahmoodkhan6623]

i dont have a table saw. is there any way to cut the grooves with just a circular saw? would you recommend i buy a certain kreg jig product for that?

[@ForgeofSouls]

Well done

[@drknlovelydrknlvnit1564]

She is adorable

[@craiguglandrealty3705]

Suggest you assembly the door frame and then slide the plywood panels into the frame before installing the last rail.

[@jmackinjersey1]

As far as the groove on the bottom of the doors, why didn't you make them with the table saw when you were making the cuts for the panels?

[@MegaYounglover]

Great video

[@geovanniestrada6473]

First of all good job 👏 . I would use a router for that groove

[@celiatyler1655]

For the slot in the bottom of the door- lay door flat on bench and use a slot cutting bit in a router.

[@DirXRoloMusicVids]

Aye bro that lil ring door clip was too hard lol

[@inspired7270]

Awesome job...

[@shahbazkh2885]

Very nice

[@ninper007]

Great job. Love the wall color. If you don't mind what is that wall color?

[@joelthomas4294]

Nice!!!

[@Dil_Dil_804]

First MASHAALLAH Second Your work is so good that I don't have words, you make so many fantastic things out of wood 🪵 incredible that I can't say. MASHAALLAH

[@rosesmyth9064]

awsome video!!

[@eboricua201]

ARE YOU PLANNING TO VISIT PUERTO RICO ANYTIME SOON?

[@ramchandrasubramanian9907]

Nice Tutorial, suggestion : Cut the grooves before assembly, much easier to manage and handle, the ladder collapse could be avoided that way..

[@tylerevans2261]

ooooo nice video, following

[@ThePandaFather]

Couldn't you make a jig and use a router with a thin deep bit to do the bottom groove?

[@teresitafaure4230]

Hello. I thoroughly enjoyed your tutorial. My question to you is in your opinion do you think I could use the current sliding closet doors for a sliding barn door? The are those orange brownish hollow doors. Or, do you think I should use the doors as French doors, instead? I’m trying to keep costs down and use what I have. Thank you.

[@cinepost]

All you need is a wood shop and ten thousand dollars worth of woodworking tools at your fingertips and you should be able to salvage your free doors……1,2,3!

[@SergioSanchez-qd4dr]

Thank you . Your videos are awesome

[@user-ok3zt2xh8j]

Router works well

[@MsAlcazoo]

Come to Miami! I wish I could do this

[@kimberleyderricutt8537]

I was so surprised that the door didn't knock over the ladders ... then i saw the outtakes 🤣

[@rogersanchez9635]

I have that same toolbox

[@hankandrox]

Why didn’t you grove the bottom panel before assembling the door?

[@faronmastin8683]

Use the table saw on your bottom board before you put it on the door frame. for the slot

[@jw1952]

Router with slot cutting bit

[@summerpattison8058]

What kind of kreg jig is that?

[@noorb8060]

Why does the original frame have to be removed for new wood to be put on?

[@pearlperlitavenegas2023]

Same ???? Why?

[@FixItYerself]

nice door