Easy chainsaw sharpening with the EzzDoo sharpener with diamond bit! -

[@brianfletcher7942]

The apparatus the bit fits into and is tightened is called the “collet”, if anyone cares😊

[@InTheWoodyard]

Yes! Thanks, I could not remember it!

[@larryallen3286]

I99

[@davidmorse8432]

I have been using the diamond bits in my Dremel tool and am pleased with the results. One thing I have learned is that the rotation of the bit with respect to the tooth is important. Rotation should be such that the bit is grinding from the, "top-down". This makes a better cutting edge because it eliminated the feather rollover that occurs when the tool is grinding from the, "bottom-up". This is counter intuitive because one would normally want to grind bottom-up to keep the tool from rising up out of the gullet. Care must be taken to keep the tool in the gullet, but with these bits a very light touch is all that is needed. So developing technique has a small learning curve.

[@InTheWoodyard]

Yup, there is a certain learning curve to the correct touch to get the tooth sharp, but it is much easier than hand filing!

[@samuelwiseman3058]

aqqqqaAQQQQQQQQQqAAaaqqQqaqqqqaqqq

[@nicolec7290]

Good point

[@pastyman3247]

As a beginner to sharpening chain saws, I've pick up some valuable information watching you. I have struggled with hand sharpening but watching your video I'm feeling very confident that my problems are soon to be over. I'm ordering that tool today. Thankyou 👍👍👍👍👍

[@InTheWoodyard]

I now use a Dremel tool most of the time, it works great too.

[@waltergregory5661]

Hi Chris! I am very impressed with the EzzDoo sharpening tool. I will be getting one for myself. I really enjoy your channel!

[@InTheWoodyard]

Thanks Walter!

[@lawrencelasley6427]

I'm a hand sharpener. And I just ordered this ezzdoo with some extra bits. Anything to get that "factory" edge. Can't wait to try it out.

[@InTheWoodyard]

I think you will like it, it works great!

[@matthewknight5641]

I love those bits. Ive bought several packs of different sizes and use them in my dremel for sharpening my chains. They come in different colors and different grits. They doake things easy

[@InTheWoodyard]

Good to hear!

[@heathenfirewoodservice2021]

I like my Oregon sharpener. It’s ability to be used from the any power outlet on a truck or side by side is great. Plus it comes with alligator clips so it can easily be run off of any battery out in the field.

[@InTheWoodyard]

That sounds nice maybe they need to send me one so I can give it a go!

[@zates2272]

Nice. I just used my dremmel for the first time today followed another video of yours. Worked GREAT!…. Lookin for better bits thanks. Goodnight Irene

[@InTheWoodyard]

The Oregon bits are the best I think.

[@garyallison4246]

Hey Chris Got a ezz doo a couple weeks ago. Love it. Sharpened about 10 chains so far. Probably not recommended but I used it on my rakers, took em down just a bit. Soooo fast I love it!!

[@InTheWoodyard]

Good stuff! I have taken my rakers down with a stone before too.

[@oleberg4196]

Answered a question I asked a while back about the diamond bits. Great video. By the way, -15 below, -35 below wind chill here in Southwest Montana.

[@InTheWoodyard]

Oh wow THAT is some cold!

[@appalachianstacker3876]

At my place of work we use a CBN (Cubic Boron Nitride) grinding wheels on our surface grinder. They are well worth the cost and far better than your standard abrasive grinding wheels.

[@InTheWoodyard]

Nice, do they make 7/32 bits made of those?

[@philliphall5198]

I have about 27 good used chains and I enjoy set at table talking to wife and hand filing my chains, I keep 8/9 sharp and ready 😊😊😊

[@InTheWoodyard]

Sounds great!

[@RoyFabian]

I recently tried out using the dremel with those bits for my chains and i like it. Huge time saver. Only big learning curve i found is you gotta pay attention to the angles you hold it at and the right amount of manipulation or You could end up digging downward too deep or being too high into the tooth loosing the gullet. Great vids man! GNI!

[@InTheWoodyard]

Yup, no different than any other sharpening method.

[@coreyriley7160]

G’morning Chris. Looks awesome. Love the diamond-titanium bit. I’ll be giving it a shot. Nice action shots. GoodNightIrene

[@InTheWoodyard]

Thanks Corey!

[@caryclemenson5558]

I bought one of these, tried it for a half hour yesterday. I wasn’t that impressed, bent one of the bits right away. I can see see that I am going to have to play with this quite a bit, there is a learning curve.

[@caryclemenson5558]

I came back and watched this video now that I have used mine once, I don’t get the impression that my bits cut as well as what I saw here. Headed back out to the shop to try it again, I’ll let you know

[@InTheWoodyard]

I also found their bits to not be great...the grey Oregon 7/32 stone bits are way better...that is all I use now.

[@InTheWoodyard]

get some Oregon bits

[@caryclemenson5558]

@@InTheWoodyard thanks man, I ordered some off of amazon this am.

[@garykersteiner4936]

I have been sharpening chains for years and have never been able to get them back to "like new" but with the EZZ DOO I can. I would recommend it.

[@InTheWoodyard]

That is great to here Gary!

[@johnhicks735]

That keeper sleeve is called A arbor keeper locking insertable peice for using different bit sizes in your ezzdoo made by Dremel tool company.

[@InTheWoodyard]

Yup.

[@LeuCustomKnives]

I ran my chain into the ground for a good 20-30 seconds a few weeks ago and man did it chip/round off one side of teeth real bad. I sharpened it back a bit using my Stihl 2in1 but man it took awhile. This thing would have been zippy zip!! Thanks for posting Chris!

[@InTheWoodyard]

Sorry to hear that, it hurts to think about that!

[@LeuCustomKnives]

@@InTheWoodyard do you know if the 7/32” shanks fit into a regular Dremel arbor? Yes I’d imagine I would have been able to use and sharpen the chain quite a bit more had I not had to file 1/2 way back the tooth to get rid of the broken tooth’s

[@eddiemortontapman7252]

Cool tool Chris , I used to work at an outdoor equipment dealer and sold the 12 volt Oregonians and bits . I may get one , I really like the diamond bits that are Available with it . Nice demonstration

[@InTheWoodyard]

Sounds great!

[@eddiemortontapman7252]

68 Degrees here in Raleigh today , 11hours of daylight here after valentines and we pickup 2 minutes a day and only gets better after Valentine’s Day for those of us that work out side ! Time changes March 13th can’t hardly wait .

[@1d1hamby]

I've been touting the attributes of diamond bits and carbide chains ever since Stihl introduced their's a decade ago. Many high volume tree cutting companies use them for most of their cutting because they are so much easier to maintain.

[@InTheWoodyard]

YUP, I agree!

[@bob_frazier]

That's news. Interesting.

[@DaveyBlue32]

I got the smoked firehouse saw 15 years ago or more and it’s got the hooked nose bar and the real carbide tipped chain… I adapted it to a different saw and on a 12” caliber tree I’ll just cut right into the ground and cut the three laterals and push the whole tree down… a 5 gallon bucket of dirt and seed and there’s no grinding of a stump… I’ve done 3’ diameter trees without a problem… I absolutely love kicking a piece of limerock that I’ve cut three inches into a I can still cut wood! For years I’ve used diamond hand files to resharpen! I just bought one of these jobbers with these little round burrs or wheels!!! These are better than they should be!

[@musiclaw1486]

Forgot that I watched this before. Great to see it again! I've been Dremel sharpening my Chains for many years! I found it to be much faster and far more convenient than a hand file. I previously used one of several older model corded Dremels and generic mini-grinders. Then got a cordless Dremel 8220 w/ a backup Li-ion battery, so I've got plenty of power and run time w/o having to use or worry about a cord. I also found that although the cylindrical stone grinder bits worked okay, the diamond bits worked faster and lasted longer for about the same price.

[@InTheWoodyard]

Yup, they work well!

[@tferstlephd]

Thanks Chris-my wife just bought one for me after i told her my neighbor had a file that he used and I wished there was an easier way! Looks like there is!

[@InTheWoodyard]

Yup, you will like it, try the Oregon bits too.

[@Sernaabq]

Awesome review I had already bought the bits, it was great to see them in action and learn more about sharpening

[@InTheWoodyard]

Glad you enjoyed it!

[@JuJuRue]

Good video. Would like to have seen you show how to use the angle guide attachment.

[@InTheWoodyard]

I use it as it should be ...with out it. I tried it and I do not like it. Many others have told me the same thing.

[@jazzdad52]

Thanks for the video. This is certainly faster and easier than filing, but there are a few problems not addressed. When you sharpen each one more or less depending on how badly it’s chipped, they will not be the same height. Looking at a cutter from the side, you can see that it slopes down from the cutting edge. So, the edge is lower every time you sharpen it. That badly chipped tooth that gets ground more, doesn’t just look shorter, it is actually lower, and not contacting the wood. The raker, should not be lower than the guide you placed over the tooth, it should be filed to the same height as the tool. If it is too high, the cutting edge will take less of a bite, if lower it will be more aggressive, and cut too deep, making it more dangerous. So, the teeth should be set so that the cutting edge is the same height from the bar, otherwise only the taller teeth will be cutting. The rakers should then be set the height determined by the gauge placed over the tooth. I put it over the tooth, and actually place the file on it, to file until the file stops cutting the raker. This will eventually file away enough material from The gauge, so that it allows you to cut the rakers too low. When you see I groove cut in it, buy a new one, they’re cheap. With experience you will be able to tell when to stop without cutting the tool. This all takes more time, but with practice, not so bad. With all the teeth the same height, ALL the teeth will be cutting, and that will save time and be safer. As with all woodworking, sharp tools are safer, when used correctly.

[@InTheWoodyard]

I have only been sharpening chains for 40 years and I only cut about 200-250 full cords of firewood a year so I am still learning. My saws cut awesome when they are sharpened this way. You might want to check out some of my 1600 other videos.

[@jazzdad52]

@ I’ll be careful not to insult you any more. I have skills in several areas, and don’t always follow the procedures that I originally learned, because with successful experience and knowledge, many of us can take shortcuts. But when I teach a beginner, I teach the safest way. I’m sure that you get great results, since you know what the outcome should be, but if a beginner doesn’t know the importance of raker adjustment, and tooth wear, they won’t watch out for the same details that you know instinctively. I assume that your video was intended for those without a lot of experience. I learn from others, regardless of their experience, and don’t need to be sarcastic when someone points out something that I missed. I also mill lumber with a chain saw, which requires very precise sharpening to get the cleanest cut, and not waste any more wood than necessary, as chain saw milling is more wasteful than band saw milling.

[@jazzdad52]

@ BTW, I’ve watched some of your other videos, and agree with what I think you are saying, that you do them very well. Thanks for the effort and time you invest.

[@oakrunacres2564]

Nice to see you got sent a product to try out. As we know you'll give it an honest review. I'd like to know if the longevity of the stones is that much better than the Oregon stones before I buy any. Keep us posted on that. Nice shout-out to Buck'n about getting the gullet! Dave

[@InTheWoodyard]

What I like is they keep their shape ...so far.

[@johncollins8304]

Two great advantages: you dont have to put the saw in a vice, you dont have to file from alternate sides, switching the blade around. So the advantage of this over the Dremel or similar is...

[@InTheWoodyard]

Yup!

[@aldredske6197]

Good morning Chris!!😀😀 I was surprised when you pulled out the EZZDOO out. Because I actually bought one of them a few months ago. I only had a 30 year old dremel that I was using. I also bought a bunch of different diamond titanium bits for it right away. Those bits are really nice compared to the stone bits. They don't plug up with metal and don't groove out in the middle. I really like mine so far. Take care and stay warm my friend!! TTYL!! Logger Al

[@InTheWoodyard]

Very cool! Good to here!

[@tomsommer54]

Do those bits fit the Dremel?

[@aldredske6197]

@@tomsommer54 yes they do

[@JohnWCH]

The frame rate/rotation of the bit sync is really cool. Like those vids you see of planes flying but the prop is still.

[@heyerstandards]

that's a neat effect

[@InTheWoodyard]

I did that! HA!

[@InTheWoodyard]

Yes it was!

[@witharebelyell2762]

I have this! I sharpen all my chains. I have a friend that PAYS an average of $20 PER CHAIN to have a tractor-selling store that also sells chainsaws to sharpen his!!! Aaaaackk! Do it yourself, people! I leave mine on the saw, lock the bar, mark the beginning tooth and the last tooth with a sharpie, and file away BOTH directions while standing in front. It takes about 6 minutes for my 14" and 8 minutes for my 20" chains. Easy.

[@InTheWoodyard]

YUP!!!!!

[@gersonduran4451]

Hey Chris nice video. The only thing I was waiting for you to get out and try the experiment by cutting some logs after sharpening the chain.

[@InTheWoodyard]

Great point!

[@gersonduran4451]

@@InTheWoodyard by the way Chris you have the best firewood 🪵🔥 channel out there and I follow about 5 of them.

[@trappn]

Enjoyed the video. Would never dispute the sharpness of all those teeth, but aren't they all missmatched size wise, now ?

[@InTheWoodyard]

Yup, length of each tooth does not matter if they do not match.

[@matthewbourgoin8466]

How’d it cut?? Let’s see a vid after it was sharpened. Love the vids 🙌🏼

[@InTheWoodyard]

You will soon, I cut a big pile with the saws I sharpened with it.

[@mitchz.6234]

I'm sold Chris....Great demo and I'm changing to diamond bits thanks to you!!.....Question, how do you fix a saw that is cutting left to right or right to left?? Maybe another video!!......Thanks for the honest review.

[@InTheWoodyard]

If you have a saw cutting crooked your not sharpening one side as well as the other....usually.

[@mitchz.6234]

@@InTheWoodyard Thanks Chris!!

[@richscott2952]

you have to sharpen all the teeth on the right side from heel to toe and move to the other side of the saw and sharpen the left side heel to toe . do not sharpen all the teeth from the same side of the saw

[@Davids_United-Fam]

Nice vid man but why no links in the description of the tool bits and brushes ?

[@InTheWoodyard]

Sorry, try google.

[@mydogdidit]

Chris, you do not have an angle guide attachment on. Do you find that freehand provides sufficient accuracy? I am thinking of using my cordless Dremel; I could buy a Dremel attachment and stones or these diamond ones. I used an Oregon Sure Sharp battery operated gizmo yesterday and I liked it except that the sharpening stone gizmo kept coming out even when tightened well. Heck with that, maybe it's worn out, I bought it used. Lastly, do you still like these diamond ones or the Oregon stone ones better?

[@InTheWoodyard]

No guide necessary, Oregon bits.

[@toddsoutsideagain]

That Ezzydoo …. I mean Ezzdoo worked great!!🤣 Those bits are the real deal. Thanks for sharing 👍🏻👍🏻GNI

[@InTheWoodyard]

You got that right! I wish I could!

[@attheranch3830]

Chris, I have one also, I just love it! Thank you for that video!

[@InTheWoodyard]

Cool!

[@mudslinger7238]

Chris I really like your Channel I feel you have more common sense than most people. Because of your Channel I've learnt about the Easton made log splitters been doing some research on them getting together the options I wanted went to order one yesterday and they have raised the prices on the 1222 $1,500 from their website they have updated the website now so if you're thinking about getting one the prices just went up.

[@InTheWoodyard]

Yes, I know, there steel costs have MORE THAN doubled in the last year.

[@stuartsplace100]

Hi Cris,i only have a manual file,i thought about an electric one,but i only cut wood for myself,so a get a couple years out of a chain.works for me

[@InTheWoodyard]

That is all you need then!

[@allritecoach6357]

What's your thoughts on these bits and the grinder now 9 months later?

[@InTheWoodyard]

I prefer the Oregon stone bits better.

[@vogelj2009]

Great job on this. Always great to see new things. Giving me something else to purchase however. Might be why my wife says I watch to much KZbin. I enjoy your video’s very much and it’s like checking on a friend to see what they are up to and I always learn something.

[@InTheWoodyard]

Thanks Jack, good to here! Tell your wife you are doing research so that you don't buy the wrong item and overspend on getting more stuff than you need!

[@canvasman2307]

I use the same style 7/32” bits in my dremel. They work well, but do wear out just like the Oregon bits…just don’t take as much pressure to do the job. My wife’s not impressed that I’m buying gold and Diamond encrusted tools for working on my chainsaw. Oh and she’s always hitting me with the Pleezzzdo list.🤣

[@thefirewooddoctor]

The pleeezzzdo list is not on my agenda. But she does the cooking so...

[@davdsonoftheeagerbeaver8619]

Lol

[@InTheWoodyard]

HA! She can have the used ones for jewelry!

[@davdsonoftheeagerbeaver8619]

@@InTheWoodyard that's probable not going to work.

[@jerryfallin1753]

@@thefirewooddoctor here in NC. We call it Honey do list 🥴

[@scrhino40]

I like to have 1 too I already see best way to sharpen chainsaw chain. Like it Chris. Good video. Have a great day be safe.

[@InTheWoodyard]

Thanks, you too!

[@DaveyBlue32]

Those bits look freaking awesome!!! That’s fast!!!

[@InTheWoodyard]

They do work good!

[@DaveyBlue32]

@@InTheWoodyard I just ordered several different bit sets a couple of long diamond files and one of these kits… I’ve used the Hong Kong diamond longer files for the past 7-8 years instead of regular files because they cut both directions so you can lock your wrist and saw the tooth sharp.. three files in 7/32… 50-150-300 grit… I use the 300 every other tank to run around the chain and stay razor sharp!!! These together will be perfect!!! My fire rescue carbide chain lots me cut out stumps!!! It’s awesome

[@DaveyBlue32]

@@InTheWoodyard hey buddy… I like your channel too!!!

[@DaveyBlue32]

@@InTheWoodyard I’m really kinda excited to see how they will handle running at a full carbide tipped chain??? It’s usually about $50 bucks apiece to have these sharpened because the company runs the diamond wheel… I was just looking and it’s a chunk of carbide on the cutter tooth and it’s rake is normal steel so I’ll be able to use the normal mill file to hit the rakes! If it’s a big stump and get about one done per chain sharpen…and if you dull them down completely then it’s a really nightmare to hand file these back to razor sharp… so I’m super hopeful that this little gizmo knocks them back to sharp!!! 😂👍. Can you please tell the company that I’d be more than happy to make a video too for a free unit!!! Dude!!! You hit a lick on that deal!!! And you definitely have made a very good and honest and straight forward video!!! Anyone who doesn’t see how much faster you were able to sharpen up your chain with this unit over a regular file doesn’t do much hand sharpening!!! Excellent video,Sir!!!

[@Redhackle]

I just bought a dremel 4000 and grindstones. I see this Ezz Doo. Should I take the Dremel back ? Bought the Ultra on your recommendation. Thank you.

[@InTheWoodyard]

I like the dremel the Oregon bits.

[@craigwilson9560]

Chris, that would have been handy after the last couple of days. Working that creekline, i hit a lot of metal. Sharpening by hand took time out of my day. With an invertor, that would have made quick work! Great video on the EZZ DOO. Those diamond stones are not wallered out like the regular stones. Great demonstration!

[@InTheWoodyard]

Thanks Craig, your check is in the mail! HA!

[@craigwilson9560]

@@InTheWoodyard, haha! I like that one!

[@MrSprintcat]

Thanks for the video. You should be keeping the Cutter parallel with that little Line on the back of the Tooth.

[@InTheWoodyard]

Yup, I do.

[@irondoger]

Quite possibly the best short stroke I’ve ever seen

[@InTheWoodyard]

Haaa!

[@DanielAtkinsFirewood]

Nicely done Chris.. I may look into this as I get towards cutting more.. Currently I am hand filing and I am getting really good at it too..

[@InTheWoodyard]

Yup, the more you do anything the better you get at it!

[@christianh1787]

These bits work great for porting and polishing head work too if you're in the engine work

[@InTheWoodyard]

Interesting...not me I am not a mechanic!

[@williamkleinsLost40Lodge]

I ordered some bits to try. Thanks for the review

[@InTheWoodyard]

Thank you for watching!

[@Millstone_Firewood]

I recently bought the Oregon electric sharpener. It's nice because I can connect it right to the battery of the processor. I just sit in the splitter box and sharpen the chain. Haven't tried the diamond bits yet. I'm wondering, how long does each bit last? I know you were standing in an awkward position but I think your chain will cut better if you get the tooth angle the same on every tooth. Also the attachment that mounts to the front of the EzzDoo that has the angles on it is very helpful. It also lets you set the depth of the cut so you get the tooth gullet more consistent.

[@InTheWoodyard]

The diamond bits only last about 4-5 sharpenings. I actually like the Oregon bits more.

[@thomasfogerty3515]

How can you keep the chain teeth with this. Meaning all the same length? That kind of defeats the prupose.

[@InTheWoodyard]

I don't. They do not need to be the same length to cut great. But the rakers do.

[@crazyhorserocket]

You didn’t use the guide tool it came with why? I just got this tool today and ready to try it. Never sharpened a chain in my life, wish me luck

[@InTheWoodyard]

It is very easy to do, just take your time and maintain your angle. You might want to start with the guide.

[@barryschwienteck5412]

I know this video is a year old but felt obligated to make my first comment Chris. You are definitely no dummy by any measure ... you were simply ignorant in this situation (LMFAO). You have and awesome channel brother ... respect is earned ... and you have it in spades. Tight chains ... and always get the gullet when sharpening. For the record, looks like you file the rakers differently on each side (at least on this chain). SO ... keep the dremel and buy the diamond bits.

[@InTheWoodyard]

Thanks for that and thanks for watching Barry!

[@78katz]

I use both a grinder and files. When I rock a chain badly the grinder comes out. For less serious touch ups I'll usually file.

[@InTheWoodyard]

Sounds like a good system...keep cutting!

[@edkerkhoff522]

So there is a real reason why i sub to ur channel Chris i just watched another video sslfamilydad working with the same new saw sharpener. Ur video so much more detailed he never even says bout the diamond stones and his camera bounces around lol keep up the great vids loce ya mean it gni

[@InTheWoodyard]

Thanks for the kind words Ed!

[@bradowen9418]

besides being yellow, how is it different than a dremel?

[@InTheWoodyard]

not much!

[@ChrisLascari]

Sharp chains are great just like your videos, Chris!

[@thefirewooddoctor]

The difference between a normally sharp chain and cat-claw sharp is staggering. Normal sharp lasts one tank. Cat-claw sharp lasts a good two tanks of fuel.

[@InTheWoodyard]

Yes, some times or until you hit a rock!

[@InTheWoodyard]

Thanks other Chris!

[@1d1hamby]

I still like the Milwaukee 12v variable speed rotary tool for almost all of my chain maintenance.

[@InTheWoodyard]

They do make nice stuff but they did not send me one to use....yet.

[@1d1hamby]

@@InTheWoodyard sometimes it's worth it to buy what you need instead of waiting for someone to give it to you. 😆

[@shaunsalley4607]

why didn't you use the angle guide, not necessary?

[@InTheWoodyard]

Not for me, I have been sharpening like this for years, to me it gets in the way.

[@AsifHussain-ly1xg]

Please tell me where to get this chain saw sharpener

[@InTheWoodyard]

Amazon or you can go to just about any hardware store and get a DREMEL rotary tool. Get the Oregon bits though.

[@scottnock5241]

Chris nice video!! What kind of chains do you use? I assume Oregon since your running the bars? It seems all serious would people change their bars to Oregon bars for some reason? I don’t know why that is do you know why that is? I guess they’re better than stihl or Husqvarna?

[@InTheWoodyard]

Cheaper! That is it. The Husqvarna chains are awesome, just cost more.

[@stevegiroux8943]

That’s an awesome tool to use especially the bit

[@InTheWoodyard]

I works good.

[@markatkinson9963]

Yes but,....how does it cut compared to a new chain.

[@InTheWoodyard]

Every bit as good, maybe better!

[@smkyg]

at my country this diamond bit cost me 3 dollar for 12 pieces. connected it to my air die grinder and work done. cheap and easy

[@InTheWoodyard]

Good to hear!

[@robertrlondono2838]

Thank you very much for your videos. All the best 🙏

[@InTheWoodyard]

Thank you Robert!

[@jessehubbard9133]

I have a timber tuff 12v sharpener I like it because you can sharpen your saw anywhere

[@InTheWoodyard]

Yup.

[@thefirewooddoctor]

Some teeth were the equivalent of 10 back and forths, others as much as 20. How does that affect the depth of cut adjustment on the "rakers"?

[@InTheWoodyard]

I was just just getting them sharp. But yes, the shorter the tooth gets the more the rakers need to come down....usually.

[@jburch1544]

It's a Dremel tool. They were made in Wisconsin back in the day.

[@InTheWoodyard]

No, it is an eez doo, Dremel is a different company and they are also made in China now.

[@2wongdong]

Came with an angle guide why not using it?

[@InTheWoodyard]

I did not like it and it is faster free hand, I have used it that way for almost 10 years now.

[@georgesalamonjr7233]

Chris, you should call them for a discount for your viewers! I would buy one!

[@InTheWoodyard]

That would be cool!

[@hardcoreplayafromthehimala4888]

How many time you can sharpen chain with one bit?

[@InTheWoodyard]

It depends on if you hit a rock or a chunk of metal with the saw, but on average 4-6 before it starts to get worn to small.

[@hardcoreplayafromthehimala4888]

@@InTheWoodyard thanks

[@peanutman6593]

OK, I’m not going to ignore the elephant in the living room any longer, your sharpened chain looks terrible and I fast forwarded to the end to see if you had a demonstration of cutting after sharpening but you did not. There’s nothing wrong with grinders except this one would be a dealbreaker for me since it is not cordless. I would buy the bits and chuck them in a Dremel instead. Your teeth have no gullet.

[@InTheWoodyard]

You are right I have no idea what I am doing, I am just a beginner, I only have been cutting firewood now for 50 years and only cut, split and sell 600 face cords a year. I only shoot, edit and upload one video every day now for almost 2 years and have 700 videos on my channel showing everything about cutting splitting and selling firewood. SO I went to your channel to see how to do it right, as seen as I know nothing and I did not see any videos displaying your extensive knowledge, I did not see any videos, do you have another channel name that has all of your expertise for the world to critique? Thanks for watching and sharing your tips.

[@peanutman6593]

OK so you can add sarcasm to your long list of talents. All I’m saying is that with what you showed me on the video, those teeth will not efficiently cut firewood. I have been at it just as long as you have, and I know how to file a chain with a variety of methods and tools but I can tell you that a tooth that has no gullet and is sloping backwards will not cut well; just ask Bucking Billy Ray.

[@darrenswoodworks8695]

Well this was an interesting little tiff. I clicked on this comment because I had the same thought as did the other gentleman. You are loosing the gullet while you were filing. I’ve been using a grandberg 12 volt sharpener for about 15 years. I pretty much threw my files away. What I discovered and you probably have as well since this video is about a year old. You need down pressure to keep the gullet and about 20% of the bit above the top of the tooth. It all comes naturally after a few shapings. The reason I like the grandberg is they have threaded bits and the bits don’t slip out just like the problem you had. Long story short, I love sharpening with an electric sharpener. Fast, and very sharp. What I want to know is how the bits hold up? The diamond bits I’ve found were not aggressive enough for reshaping after hitting the ground or a nail. What do you think after a years use?

[@yyyyyy1031]

Another great video. You introduced me into the Dremel, thankyou very much, it cuts like buttah. You have now introduced me to the diamond crusted burr. My comment being 2 years after this video, may I ask, are you still using the diamond burrs or have you gone back to the stones? Thanks. Big Mike, tampa

[@BravoBull1]

O thanks, I'll stick to handfiling

[@jonbutcher9805]

Always used a file rather than these high speed gizmo's. Someone old me years ago that using these machines tend to super heat the edges making them brittle. Now I'm not so sure. Does it Yes or No? If anyone knows the truth please enlighten.

[@InTheWoodyard]

I stopped using a file to sharpen about 5 years ago, never had a problem at all, and I cut about 200 full cords of firewood a year.

[@jonbutcher9805]

@@InTheWoodyard thanks, maybe its time for me to join the 21st century.

[@bb1040]

Will the bits fit in a Dremel tool ? I have the Dremel tool, just need to buy some bits for $13

[@InTheWoodyard]

Yup, they do...but I prefer the Oregon 7/32 stone bits myself, $6-7 for 3.

[@bb1040]

@@InTheWoodyard how long do the bits last ?

[@TigerRagFishingTeam]

Almost looks like you're using a 7/32 bit for 3/8 saw chain on 0.254 chain which is giving that ski ramp shape. Maybe it's just not hitting the bottom of the gullet causing that effect. I just bought a kit to go with my Milwaukee rotary / Dremel style tool. Probably should have just bought the bits. But just looking at technique. I think it'll just take some time probably similar to you using this tool which appears to be for the first time for you as well. I did a test run and I don't think my diamond bits cut as deep as those look like they're doing. Chain cut ok, but definitely not as good as hand filling so I've got some work to do still on this method. I just bought a cheap kit off eBay. I have since gone and gotten the Oregon bits to try them next. Appreciate your video!

[@InTheWoodyard]

Yup, the Oregon stone bits work better.

[@bradsnyder8802]

Anyone know if Oregon chains are significantly harder than Stihl's? I recall several years ago trying to file an Oregon without much success. The diamond bit keeps its diameter much better than the stone bits you were using. Very nice.

[@InTheWoodyard]

I do not know if they are. The diamond bits do work great!

[@bob_frazier]

Highly unlikely. Stihl chain is top shelf, made in Switzerland 🇨🇭.

[@garsonprice3441]

I saw recently on KZbin that the Stihl chains are harder than Oregon chains, but this reviewer said he preferred the Oregon chains because they would take a better edge. Similar to carbide tools compared to high speed steel I suppose. I can't verify because for decades I've used Oregon chains and sharpen them with the Oregon sharpener. It also comes with the guide that ensures the hook is angled properly on each tooth. A sharp chain without the proper hook will not cut worth a darn. The file angle is much less critical. You have to love these power sharpeners. Never go to the woods without touching up the chains.

[@paulnandico2370]

Do you have any counsel for keeping the angle consistent? I understand that is key and wonder how hard it is to do freehand?

[@paulnandico2370]

It looks like your chain may have angle markers on each tooth. Is that how you do it? Also, is it okay to grind one down more than the others?

[@InTheWoodyard]

No, I do not use one but I do have it, freehand is the way I do it.

[@InTheWoodyard]

After a while the teeth are different lengths.

[@paulnandico2370]

@@InTheWoodyard thanks. I have always taken my chains in, but would like to do it myself. The few times I have tried sharpening (with a file) it has resulted in a poor cutting chain. However, taking it in usually means I get 2 sharpenings then have to buy a new chain. Fewer rocks in NH than OK, plus, I am probably more careful with age.

[@paulnandico2370]

@@InTheWoodyard thanks. Guessing they still cut right, so maybe it's just sharpness and correct angle, and not thickness of the teeth. I sure appreciate you taking the time to respond. Your programs are so good we have 2 boys here considering it. Here, it is a good service to help people when trees fall, and provides us with firewood. They see the long term possibilities for a business like yours. Thanks again!

[@terryboomershine6812]

I use a milwaukee die grinder with those diamond sharpeners ,works great..

[@InTheWoodyard]

Yup, way faster easier and better than a old file!

[@everettwhite9874]

An ice storm came through last week causing downed trees all over the city. I used my saw that was getting dull on them helping neighbors. So, instead of getting a new blade I’ll just try the EzzDoo, save a few bucks by avoiding replacing the blade a few times and let the EzzDoo pay for itself. Blades are about half as much as the EzzDoo itself, and I really like how fast the blade can be sharpened. Pretty good demonstration and it was right on time. Winter isn’t over just yet. 😉

[@InTheWoodyard]

Thanks for watching Everett!

[@rickhamm3962]

Blade? CHAIN.

[@deansavie3958]

Do you still use those diamond bit? How do they old up

[@InTheWoodyard]

No, not to much, they do not last long, I mostly use the Oregon 7/32 stone bits.

[@stanleykeith6969]

I like this Tool. Nice Job Chris.

[@InTheWoodyard]

It does work well!

[@dealsfromvirginia1773]

I think I'm going to order this tool. Is it still a recommend and how do you manage to answer all these comments from past vids and still have a life? You seem extremely busy.

[@InTheWoodyard]

Thanks for watching...firewood, trapping , hunting and youtube are my life!

[@sailme2day]

great review :) with all the small metal filling parts , should a quick rinse with brake cleaner be wise before use , to flush out all the metal ?

[@InTheWoodyard]

Thanks, maybe, it might help.

[@dab.]

Do the bits actually contain diamond? The manufacturer's spec states 'titanium coated silicon carbide' though I see the box says diamond. Diamond is not recommended for powered sharpening of steel.

[@InTheWoodyard]

I do not know, I prefer the Oregon bits.

[@thefirewooddoctor]

How worn is that chain compared to a new one and how close to replacement is it by the standards you use? You said that one tooth is almost done for.

[@InTheWoodyard]

Yes, that chain is pretty much done for.

[@nelsonridgefarm]

Cool tool! Thanks for the demo! -Brad

[@InTheWoodyard]

Thanks for watching!

[@powdercreekwoodworks3403]

Chris, I see you free hand this process. How can u b sure you keep the correct angle. I have used a round file with a clamp on guide and have still had trouble with the chain cutting a curve in a log. I certainly like the idea of the speed of the sharpening process with this tool or a dremel. Thanks

[@InTheWoodyard]

Practice. The main thing is that BOTH sides are equally sharp.

[@wesleycallison5593]

Both sides must be the same length. Right handed people usually push a little harder on the right side. At least I do. If it goes crooked on you file the longer side again. Or lay on top of the saw like Bucking.

[@HILLBILLYSFIREWOOD]

Way much better, not heating up cutter tooth like the stone did..👍👍

[@InTheWoodyard]

It seems so!

[@miguelmendez4690]

GOD bless you good video my like 👍🏼 ok from Guatemala 🇬🇹

[@InTheWoodyard]

Thank you very much!

[@jandblawncare8570]

I am a fan of the 2 n 1 sharpeners because its quick and does 2 jobs at once but never got the chains back to a lasting edge so Ive been looking for something else and bought some tecomec hand filing system and while it was a pain to set up it seems to work but after about the 30'th stroke your fingers are killing you and its super slow going so back to the 2 n 1 sharpeners I went and with the use of cheater glasses I could now see I wasn't filing it back enough, now I can get that new chain edge back BUT...still takes forever on a 24" bar so might have to look into one of these. Also, in my opinion (rant), some of these guys telling you that you only need 3-5 strokes of the file to get a sharp edge again and to file each tooth the same amount.....B.S.! File it til it's sharp no matter if its 3 strokes or 15.

[@InTheWoodyard]

Yup. Try this ...it works and it is easy!

[@jackrich821]

Great video and those bits look like they would last longer than the regular stones. But the one thing I noticed (No offence) but the angle that you are grinding does not match up with the factory guide marks on the chain and I thought that was the most important thing when sharpening a chainsaw chain ? Just wondering if after you sharpened that saw if it cut good and straight ?

[@InTheWoodyard]

I have been sharpening my chains for about 8 years now (thousands of times) with a stone and rotary tool, Dremel, and yes they are sharp and they cut straight. I actually prefer the Oregon 7/32 stone bits.

[@TheTriangle4]

So since this video you're saying you prefer the stone over diamond? Was about to pull the trigger on some bits but I'll wait to hear from you first. Thanks!

[@raprock5000]

Looks like a good tool. I could be wrong but I think you're grinding off more than you need to. Also it doesn't appear you're always holding it at the same angle. Probably sharp though. 👍🏼

[@InTheWoodyard]

Yup, maybe so. And yes they are sharp.

[@makincash3337]

How do I know when to sharpen?

[@InTheWoodyard]

You can feel it not cutting as good.

[@makincash3337]

@@InTheWoodyard thanks

[@craigunderwood4353]

I bet a rotto zip would work as well?

[@InTheWoodyard]

Yup, any rotto tool!

[@johncollins500]

Watched you file with your Dremel last fall so I bought me a battery operated one. But I might check on the diamond bits. Might not be so but I think that diamond bits don't produce sparks. Have a great day

[@InTheWoodyard]

You are correct!

[@Firewoodguy-t6m]

were can i buy EZZDoo harpner

[@InTheWoodyard]

Amazon...or you can get a Dremel at any hardware store...same thing!

[@heymakerphd1982]

Told you so!! Now we need to see the Norton sharpeners. Is the diamond still the same diameter? The other stones get smaller so fast. I forgot, what's the price of the Oregon stones?

[@InTheWoodyard]

Oregon stones are $6 for 3 and these are $13 for 8