Easy DIY Camera Crane Jib - Complete parts list

Here is a DIY tutorial that will allow you to build a camera crane for filmmaking.This very simple jib can be built quickly and for less than $35. Get impressive shots without the expense of pricey commercial models.
PARTS LIST :
ALUMINIUM SQUARE TUBE :
(1x) ¾" - ¾" - 47"
(1x) ¾" - ¾" - 34"½
(1x) ¾" - ¾" - 7"
ALUMINUM ANGLE :
(2x) 1" - 1" - 6"
(3x) 1" - 1" - 3"
PLYWOOD :
(1x) 2"¾ x 3"
BOLTS AND NUTS (1/4-20 Thread) :
(2x) ¾"
(2x) 1"½
(2x) 2"
(2x) 3"
(8x) ¼-20 Nylon Locknuts
(16x) 1/4 Nylon Washers
(1x) ¼-20 Furniture T-Nut
COUNTERWEIGHT :
(2x) 2.5LBS weight
(1x) ¼-20 x 2" bolt and ¼-20 nut
(1x) ¼-20 thread plastic knob
Thanks for watching, please like and subscribe if you like my work. Im working on more projects stay tuned.
INSTAGRAM : / sebtechdiy
FACEBOOK : / sebtechdiy
PINTEREST : / sebtechdiy
WEBSITE : www.sebtechdiy....
♪♫ Music Credit ♫♪
Modern Theme by Nicolai Heidlas Music / nicolai-heidlas
Creative Commons - Attribution 3.0 Unported- CC BY 3.0
creativecommon...
Music provided by Music for Creators • Video

[@ChrisMaloneCAM]

Built it last night. Good notes and details!

[@lalazola8562]

This is a valuable addition to my woodwork collection kzbin.infoUgkxbnOKZBE4evMO5V2vroHeCjq6d_MV6wJO I still will rate this woodwork plan as the best in my reference library. It always seem to stand out from the rest whenever you go through the library. This is a masterpiece.

[@CamerieriZeppoleMix]

GREAT job , i love the NO VERBAL ORATED WORDS AUDIO TRACK!

[@kmuralikrishna1582]

You really deserve person, really thanks for this video and clear explanation from scratch.

[@Digestall]

The best DIY ever. Thank you so much.

[@SEBTECHDIY]

Thank you 😊

[@JamesWilliams-qw8on]

Exactly what i needed. Thank you for your straight-forwardness

[@SEBTECHDIY]

Thanks :)

[@tacrewgirl]

Great design. What I've been looking for in the last few months. Thanks!

[@modustrial]

great idea! Im building up my arsenal of camera gear for my channel, and might have to make this myself. Im trying to think of a way to mod it so it could be a slider too.

[@JoshFromPerth]

Me too. I'm going to build it first and sliderise it later. Did you manage to do this

[@groundbreakerexplore]

Awesome DIY ideas. I like your project. Thanks for sharing this video.

[@JUSTTRYITDIY]

Very nice! I will be building one this weekend

[@jj-lukas]

fantastic engineering idea! Going to borrow this for an upcoming music video!

[@ChuckLoadofComics]

Spectacular!!! Thanks for making this video.

[@BMWZ4Mods]

Great tutorial, thanks for sharing

[@mzansitelevision6769]

YOU DESERVE MY LIKE

[@SEBTECHDIY]

Thank you :)

[@davidhefner5668]

Great design....I'm going to build one in the future. I saved your video in my photography note book along with my wish list. I just purchased a Nikon d5300. It Wii le arriving next week,

[@SEBTECHDIY]

Awesome, im still using my jig 3 years later i really love it. Now i jeed to buy a camera because im still recording with my samsung s9. The D5300 seems a really nice camera 😁👍

[@flightographist]

I enjoyed that, smooth rig.

[@rozzembi7318]

EXCELLENT!!!! Love the tutorial!!!

[@SEBTECHDIY]

thanks :)

[@rozzembi7318]

Ordered the aluminium square tubes to make my own jib to help my friend with his cover song videos. Hopefully, I can get great shots with this jib. THANK YOU SO MUCH!!!!

[@thepcmacademy]

You have done a great job

[@SEBTECHDIY]

Thank you! 🙂

[@roadhousepromotions4459]

Great video, thanks!

[@valberfirmino]

Perffect !!!!! Congratuletions !!

[@3laarefat30]

Thanx a lot for ur effort!

[@khajatntj4729]

Excellent...

[@gamingisnotacrime849]

that's so sick

[@SEBTECHDIY]

Thanks 😏 !!

[@israrodrguez2556]

Wow wow Amazing

[@shivshankarfilimentartenme3772]

Very nice good job

[@SEBTECHDIY]

Thanks a lot

[@creativeofi]

Greetings from Colombia, great friend idea, delighted of the realization of your crane How do you do to put it in the tripod?

[@NehTv001]

We love it

[@OVIMBUNDUFILMES]

BIG thanks

[@talhaproduction2331]

Good work

[@tetsuovan]

Good job !!!

[@mufama9995]

Thanks for your video.

[@tapasghosh1237]

Very nice

[@techwithtrendtelugu6535]

Bro toooooo nice tnq for clarity details........

[@DASHCREATIONODIA]

Most use full

[@jumcopper]

you the best. cauz i tried a longer arm and its actually working but the problem is the controls on the camera and monitoring the recordings

[@chazsteadman5020]

I would sure like to know where you got your aluminum tubing because the pricing right now is rediculous! Great design and video!

[@akashcreation1701]

nice job

[@SEBTECHDIY]

Akki Wani Thanks :)

[@EdwardKilner]

What max weight can this hold? If steel were used, what max weight could be supported? Approximately, would do.

[@uweschroeder]

From a mechanical standpoint, the tripod mount is the weak spot. I'm surprised it even stays on the tripod. The way the T-Nut is mounted, it will pull out easily (nailed in from the bottom). The better way to do this would be to flip the wooden plate around and have the t-nut go in from the top. That way the 1/4 inch screw from the tripod will pull the nut and the plate towards the tripod. You may have to use a longer tripod mounting screw or some quick disconnect though. The way it's mounted now, a simple lifting or tilting motion will dislodge the t-nut in the base and the entire crane will come tumbling down. Not an assembly I'd trust a $2k camera to. (the nail fins on t-nuts are not meant to keep them in the wood. They're meant to stop rotation. That nut is mounted wrong)

[@ericrand6276]

Is the block with the tee nut upside down? If that is used to attach to a tripod, the tee nut should be on top of the block, otherwise it could pull out. Otherwise great vid

[@2291532]

very cool!!!

[@SEBTECHDIY]

Thanks! :)

[@imAlwar]

Awesome.. is there any video regarding slider??

[@t.a.jadhavyoutubecannal856]

super..🤗😇🙌🏽👌👍🇮🇳🇮🇳🇮🇳

[@mehmetmetinengin8921]

sehr gut

[@ajtvproduction9436]

#Thanks_you ! so much. I found it. Correct video which I want to search.

[@DineshKumar-uk6ro]

Nice sir...👌👌👌👌👍👍👍👍💐💐💐💐💐💐💐💐💐

[@teamtiger450]

Nyc dost

[@robertheer4043]

I like the jib but does it mater if the weight bal. bar in on the bottom or the top? and why?

[@dbz19852004]

how did you mount the jib crane onto the tripod?

[@إبنبغداد-ش5ل]

J7 CINEMAS ❤

[@randybmx]

@4:25 1/4-20 t nut

[@baltusbrothers]

I've got a question which sizes do you use? Inches or milimeters?

[@BMWZ4Mods]

2" = 2 inches. The " represents inches. HTH

[@aiyachayothin4693]

YASSSSSSSS!!! LOVE IT

[@aiyachayothin4693]

YOU DESERVE A MILLION SUBSCRIBERS!!!!!!

[@agapitomoreno7050]

What is the diameter of the bit? Thanks for the video

[@kaleidoscopethestudio8863]

Can we use any camera or it is for only cell phone

[@a4production544]

nice

[@morgantaylor8138]

Will this work with PVC pipes?

[@Tobs1313]

Can you tell what was the total cost of the materials?

[@alifadel2867]

Good

[@raj45323]

for aluminium square tube what is wall size

[@SEBTECHDIY]

if you means the thickness it's 1/8" ( 3,175mm ) ;)

[@raj45323]

3mm is not available. 1.2 mm thickness available any alternate for this

[@Jeeper266]

The build list is missing (1) 7” 3/4 tube.

[@VeeDuggie89]

hey Ryan, i noticed that but thought it best to read all the comments in case i had missed something else. All in all a great set up. I have all the materials and am about to start!!

[@ToyTruck]

I've just tried and the camera shakes terribly. Nice youtube content, though.

[@Talesfromtheblitz]

can u build me one? how much?

[@stromaxwell]

I know this is an old video but do u have more samples?

[@SEBTECHDIY]

Only made one, and still using it! 😊

[@vedantmishra6518]

Are the measurements in inch

[@channelserbaserbi7472]

👍

[@edsonguerreiro7704]

EDSON8 /9/2017GUEIRREIRO BAHIA

[@ajtvproduction9436]

It is too easy it can build cheaply. I think it is the world's cheapest crane and easy making crane. And it can give cinematic shoots like pan , slide and tilt etc,.

[@dittodtwo]

supare

[@SEBTECHDIY]

Thank you ! 😏

[@magnum8264]

they want 500.00 for this

[@DJHobro]

for wood furniture plan

[@atiation10]

খুবি বাজে

[@nasken6031]

wouldnt call that easy

[@bomaryniuk3639]

FFS, why inches... %-( Sitting and converting that retarded system to metrics. Sorry for ranting though. :-P

[@jakecameron5085]

Taking credit for something designed by OliviaTechVideos over 8 years ago?

[@SEBTECHDIY]

What you mean taking credit? There is 100 of theses on internet, i just show how to make it with alot of details so you can build one easily. Also, who is OliviaTechVideos? There is no videos on the channel your referring to. 🤔