EASY! DIY Hanging Above Garage Door Storage Shelves Cheap!

If you're like me then you like organization. Plus you probably have a lot of stuff surrounding the perimeter of your garage and you'd like to gain that precious space back. This is the perfect opportunity to build this super easy hanging above the garage door storage shelves and reclaim that garage floor!
My gear:
Samsung Note 9 - amzn.to/2UbdAX2
Campark 4K Action Camera - amzn.to/3cT2vjU
Sony A7 Full Frame - amzn.to/3vFeckN
Adobe Creative Cloud
__________________________________________________________
By day I'm a Functional Medicine Doctor and Chiropractic Physician. Outside of the office I have a lot of different hobbies and interests. Everything from cycling, home projects, wood working, and tinkering with my F150. I love doing DIY projects and just being a creator. Some have failed miserably while others have been a huge success. No matter the project there was always something to learn from each. There's a certain satisfaction from making something yourself. I've learned so much from other professionals and DIY'ers here on KZbin. This channel is dedicated to helping you tackle your own DIY projects and hopefully taking some of the mystery and fear out of the equation.
Connect with me:
My site: drwillmosbey.com
My Facebook: / drwillmosbey
My Clinic: thrivefamilyhealthcenter.com
Clinic Facebook: / thrivefamilyhealthcenter

[@craftedbykvg4649]

Great video. Just a point of clarification for those that don't know. If you're ripping a 2 x 4 (1.5" x 3.5" actual) in half, you won't be left with 2 pieces that are 1.75". The blade removes the amount of the material equal to roughly the width of the blade, so your remaining pieces will be less than 1.75" wide each.

[@justdissin7340]

Awesome video

[@lillithjones993]

Impressive🎉 I am amazed how the screws can hold so much weight. 😮

[@loubino18]

Well done, Sir - thank you! Just finished thanks to you! :)

[@clarkdoukas3477]

Nice and simple. One thing I would recommend is leaving room to wind the garage door coil springs. When they break and need replaced, the door guy will thank you.

[@edgararcega3046]

Can a entire 4x8 sheet of plywood be hung up using this trick?

[@snazzypants57]

I also need a shim board for the 1/8” gap between drywall and support boards. What did you you for that? Did you rip another 2x4 to 1/8”?

[@DRRay-zj9mh]

Just curious why you decided to build the shelves as 41" (instead of 48") x 96"? Great video, very helpful. Thank you.

[@jasonkirk3166]

Why a 1.75 instead of the full 2x4? I figured with the amount of weight it would be sager for full 2x4???

[@michaelchan161]

How difficult would it be to change the springs on your garage door with these shelves installed?

[@ericcoleman4107]

Doesn’t look very sturdy. I bet the plywood will sag significantly over time.

[@TyNguyen-vp8wk]

That’s dumbest idea to have a storage above the door, how are you gonna fix the springs? 🤔