Easy DIY Spark Plugs and Ignition Coils Mini Cooper S R56

Engine loosing power or misfiring? Get it fixed yourself for a a fraction of the cost compared to the dealer or any independent shop. Al you will need it is the parts and a couple tools to change the Ignition Coils and Spark Plugs on a Mini Cooper S.
Parts needed:
Ignition Coils: amzn.to/2E6fIEF
Spark Plugs: amzn.to/2HcZ0VX
Thin Wall Spark Plug Socket 12-point, 14mm: amzn.to/2Hf8ro4
Torque Wrench: amzn.to/2LzW0Y4
*- MUST HAVE CAR ITEMS - *
My Favorite BMW Scanners: amzn.to/4b6GQBa
My Favorite Car Scanners: amzn.to/3tR2VTT
My Favorite CarPlay Units: amzn.to/3Uc8lTZ
BMW Focused Mechanic's Tools: amzn.to/3krC4J1
Portable Tire Inflator: amzn.to/3V5F63v (my favorite), amzn.to/3AokFp4 (cheap, but good)
Portable Jump Starter: amzn.to/3L3YNUX
Favorite Dash Cam: amzn.to/41EdqWe (under $150)
Car Phone Mount: amzn.to/44bW1oM (MagSafe Air Vent), amzn.to/3PvG9ck (+Wireless Charger)
“BMW” Battery Charger: amzn.to/3HahLIi
GEAR I USE FOR FILMING: amzn.to/3Ex3RyI
______
If you'd like to support what I do, please consider supporting the channel for just $1 a month: / simplecarguy
/ simplecarguy
simplecarguy.com
-----------------------------
Links are affiliated where possible.
This means if you click on the link and purchase the product, I will earn a commission.

[@ipad_john]

Thank you for the video mate, the dealership wanted 1000 bucks to get these done

[@digitalcynic]

I just did this on my 2013 Mini Cooper Coupe and not only do the links all still work but the video is perfect. Thank you for teaching a first timer! The parts work great and it was as easy as you show. Subscribed!!

[@SimpleCarGuy]

Very happy to hear that! I love when my videos help someone work on their own cars. Thanks for watching!

[@michaelking42]

Great video, simple explanations and to the point, well done and thank you! New subscriber here.

[@SimpleCarGuy]

Awesome, thank you!

[@SimpleCarGuy]

Thank you everyone for watching. Please consider subscribing for more car videos! Check out this video on MINI Cooper problems to expect: kzbin.info/www/bejne/d4KliWSpd81_jMU

[@DeanG55]

Great video, and yes, you need to have that special spark plug socket. Mine also has a magnetic ability to help pull out the spark plug.

[@littlekahunas7779]

Great video. Thank You for saving me but loads of money and probably more down the road.

[@SimpleCarGuy]

Glad I could help! Thanks for watching.

[@stevevasquez9203]

thank god for these DIY I was so close to drop $500+ 🥸

[@katedavis3953]

Thank you for post this!

[@precool]

Hey, I did it! Thanks so much! My torque wrench only shows in/lb. and the metric numbers. Could you tell me the setting on the other side of your wrench? Thanks again!

[@cariea]

Do you have any tips on getting out stuck coils?

[@edwinlewis6817]

Thank you so much for this video!:)

[@SimpleCarGuy]

Glad it was helpful!

[@mikejacobson312]

Two of my coils came out easily as in your video….having a heck of a time pulling out the other two…..recommendations?

[@slyrhythm6471]

Thank you!

[@redeemedone7457]

Very good tutorial

[@t1hsho70]

Thanks for the video - A lot easier than I thought. I did look up the parts on Amazon with your links and Amazon states the coils do not fit my 2008 Mini S R56 (saved s my vehicle on there) but I am thinking they may be wrong. Is there other coils that I may need? I just don't want to order and find out they are not fitting.

[@yuvallahmi]

bosch original !?!? for this car ? 🤷‍♂️

[@SimpleCarGuy]

Yes, I believe the OEM BMW parts were made by Bosch.

[@jordanfowler2734]

Great Video. Just wondering where you got your headlights? They look excellent!

[@SimpleCarGuy]

Thanks! Check out the video on those headlights: kzbin.info/www/bejne/h5ykZY2dhZl4iJo

[@ChetanReddy4848]

Can you please provide the link for the other tool ypu used to remove the sparkplugs initially, i think its socket extension but which one should i get 1/4 inch or 1/2 inch or 3/8 inch for my 2011 mini coopper s n18 engine??

[@dansilva21ds]

I looked up the ignition coil part number you used to perform this replacement (0221504800) in the Amazon link you provided. The page says that the part number does not fit your car. What gives? Is Amazon incorrect?

[@SimpleCarGuy]

Thanks for checking but this is the correct part. You can check on their website: www.boschautoparts.com/en/ymme?partId=0221504800&partName=Ignition%20Coils

[@motorola9165]

Between the torque wrench and the spark plug socket, I see you used a long cylindrical metal part not included in the parts to buy. without it I don't think I'll be able to reach the spark plugs. What's the name of it?

[@SimpleCarGuy]

That’s just a socket extension. Comes in almost any tool kit I’ve ever seen. You can also buy a set of like 3 for $10

[@saulzelaya5575]

Will this fit my 2010 Mini Cooper S?

[@andresguzman8141]

If it has oil in the spark plugs

[@thebanditsix]

Can't remove the coils, stuck in?

[@tm5346]

Will this fit my car I’m sure it’s about time ! And I am going to attempt to do all of myself mini 101!

[@SimpleCarGuy]

I’m familiar with Mini 101, what year is you car?

[@tm5346]

@@SimpleCarGuy 2013 mini copper base thank you !

[@SimpleCarGuy]

@@tm5346 I believe this is the coils you need: amzn.to/2KdgyFL and the plugs: amzn.to/3f4ipYz Do check with Amazon's garage tool to make sure it fits your car, though!

[@Simrin]

The original coils looked like Delphi and the replacements Bosch. Would you say it doesn't make a difference? I've read the Delphi ones have that metal heat shielding over the Bosch ones or is that a so called advantage and a load of rubbish?

[@SimpleCarGuy]

Bosch coils were the OEM ignition coils on these motors and that’s why I went with Bosch. They will work just as Mini designed them. However, in recent years, BMW started using Delphi coils on a lot of BMW engines. So, I would go with the ones that fit your budget best. I would go with Bosch unless you have mods and every little bit helps

[@antoniolongoni8788]

Good ! , hey friend a question for you , Laser Platinum(Ngk) is best than Laser Iridium(Ngk) ?

[@SimpleCarGuy]

I'm not an expect on spark plugs, but people argue all the time which is best. The ones I recommended in descriptions are the ones that Mini recommends.

[@KenCheng]

would misfires and loss of power be caused by the need for new coils and spark plugs?

[@SimpleCarGuy]

Absolutely. It's not guaranteed that the issue, but 90% of the time plugs and coils will fix a misfire.

[@giorgos7six]

Great video, many thanks. Where can i see the torque settings for everything that needs to be screwed on a R56 mini? Also... in my country, i get diff part No for the SparkPlugs and IgnitionCoils (12120034098, 12138616153) Any clue what might be the case here?

[@SimpleCarGuy]

I used newTIS, but they have been shut down since then. See if you can download a BMW manual or INAP for your car. As far as different part numbers, what model and year car do you have?

[@giorgos7six]

@@SimpleCarGuy its a 2008 R56S

[@SimpleCarGuy]

@@giorgos7six For that year and model the engine should be the same, so the same torque settings apply.

[@giorgos7six]

@@SimpleCarGuy i was actually mixed up with the spark plug partNo's, but its ok :-)

[@precool]

How often do you swap the coils? Thanks!

[@SimpleCarGuy]

I think they recommend every 60k miles, but I usually go until I get a first misfire and then change all of them.

[@paulheagen6318]

Yuo don't recommend using anti-seize thread compound?

[@SimpleCarGuy]

I followed the steps in BMW's manual, they don't mention any anti-seize compound. Thanks for watching!

[@Devinatron]

Anti-sieze typically isn't recommended for spark plugs due to the lack of moisture they come in contact with, it alters the torque results, and some plugs come with some sort of anti-sieze coating already on the threads.

[@jimmiesanford3967]

Torches are not that cheap at Harbor freight they’re about $125-$169

[@Panda74gofaster]

Great work? Thank you…

[@saulzelaya5575]

Amazon says this will not fit my 2010 Mini Cooper S, can you advise?

[@SimpleCarGuy]

The links I included are for the 2010 Mini Cooper S. That’s what I’m installing here

[@garyvanremortel5218]

I was informed that the Bosch coils were prone to high failure rates so BMW switched to Delphi and then finally to Eldor.

[@SimpleCarGuy]

It’s possible, I’ve never had any issues. I’ve used Bosch on 4 cars for the past 7 years and never had to replace one after 2-3 years of driving on them.

[@garyvanremortel5218]

@@SimpleCarGuy I agree, but nevertheless BMW switched a few years back.

[@yellowmanusa]

About how many miles did you have on the car when you did this?

[@SimpleCarGuy]

The car had a little over 100k miles.

[@yellowmanusa]

@@SimpleCarGuy Roger that. Thank you for replying. Definitely loved your video and anedotal commentary. Helped me feel comfortable doing it myself. Much appreciated, friend.

[@SimpleCarGuy]

Always happy to help!

[@oyinkah]

✨

[@precool]

This again!

[@nilolee2426]

can you use regular 12 point deep socket?

[@SimpleCarGuy]

As far as I’m aware it will not fit in there as it has to be thin wall socket. I haven’t tried it though and it’s only like $5-10 for the socket.

[@nilolee2426]

ok, thanks

[@sandynicholson6516]

What is the Amazon link please for the spark plug socket?

[@SimpleCarGuy]

Here is the one I bought: amzn.to/3V6HPJj

[@fbifbi5187]

invented

[@fbifbi5187]

2hats in it fo4 u

[@fbifbi5187]

t9u didnt say that fyring wa4 did we b8tch attack8ng a ba y and got his ass b3at

[@tm5346]

Just a little heads up on plugs Check &double check fake plugs Amazon! Mini 101 ! Safe than sorry

[@SimpleCarGuy]

Definitely good to check!

[@tm5346]

I actually bought Bosch simply BC they had them in store ..I just want them to work properly! Already experience a nightmare twice once with the battery once with Amazon I wanted the whole set of brakes and I didn’t get all UGG! I’m not mechanic many thanks for video 17 torque is correct that’s what I was second-guessing nonstop because some people say 19 so therefore if you have your manual go to the manual unfortunately I didn’t want to go there but I did lol

[@SimpleCarGuy]

@@tm5346 Sometimes it's hard with so much information on the web to see what's correct and what isn't. I try to research as much as possible for the videos and provide correct information. Thanks for watching and good luck!

[@MrGrand2000]

Didn’t realize its so easy.Just paid a garage 450!bucks

[@SimpleCarGuy]

That's not TOO bad, actually. I've heard people pay much more. Maybe you can do it yourself next time!

[@JuliaKarr]

I was just quoted $650 so attempting to do this on my own - waiting for the parts to arrive!

[@m0nkeyr0ach]

Not a bad price. I was quoted 1k

[@Panda74gofaster]

Is not 23nm?