Easy DIY Wand (3 Ways)

  Рет қаралды 166,959

Brenda Soto

Brenda Soto

Күн бұрын

Hi everyone!
This video is a remake of a previous DIY wand I made years ago when I started KZbin. I show you three easy ways to make a one of a kind wand. Hope you like it!
INSTAGRAM: / brendaysoto
Not a sponsored video.

Пікірлер: 194
@Gan596
@Gan596 4 жыл бұрын
Pro-tip: After you have filled the paper tube with hot-glue, you can hide the edges of the paper, make the wand more sturdy, and give it the appearance of wood by hot gluing the entirety of the outside of the wand, then using the nozzle to spread the glue from the handle down towards the shaft or vice-versa. This creates a striation effect that you can make super intense and rough, or smooth and woody. You can also paint on top of this, which means that you can further control the design of the wand. If you're really good with hot glue and have the patience, you can even manage the elder wand and it's shape with this trick.
@shyamalamurthy7811
@shyamalamurthy7811 4 жыл бұрын
Useful.....
@Gan596
@Gan596 3 жыл бұрын
@Renu Bala you're welcome 🙄💜
@iamnotren
@iamnotren 2 жыл бұрын
Thank you for this tip I hope I can try it some time
@nekohwa330
@nekohwa330 3 жыл бұрын
don’t @ me but I was so tempted to just go grab a branch-
@aera3228
@aera3228 3 жыл бұрын
you can actually do that
@Bella-eb7hc
@Bella-eb7hc 3 жыл бұрын
Same 😆
@pokemanpey786
@pokemanpey786 3 жыл бұрын
I have 2 trees in my yard and a small forest near me so that's what I do
@Neha_012
@Neha_012 3 жыл бұрын
😂😂😂😂I’m dead
@kelseyissastar
@kelseyissastar 2 жыл бұрын
That’s how wands were made always
@espriaolsone7024
@espriaolsone7024 5 жыл бұрын
Great video😁
@BrendaSoto
@BrendaSoto 5 жыл бұрын
Thank you!
@espriaolsone7024
@espriaolsone7024 5 жыл бұрын
@@BrendaSoto you're welcome😀
@I_am_Jericho
@I_am_Jericho 2 жыл бұрын
My glue is just sticking to the side of the paper 😔
@mateothebayo
@mateothebayo 5 жыл бұрын
Amazing! This was very useful! Now I can go to the wizarding world in my Ravenclaw outfit!
@sergeantmajorabdullahmohab1837
@sergeantmajorabdullahmohab1837 4 жыл бұрын
Im in slytherin
@areebarahman4580
@areebarahman4580 3 жыл бұрын
@@sergeantmajorabdullahmohab1837 same
@tytychickenfry2641
@tytychickenfry2641 3 жыл бұрын
Griffindor
@sbarrow06
@sbarrow06 3 жыл бұрын
I'm looking forward to Ravenclaw as well... And I just made my first wand today!!! Using the instructions this video described. I going to make a few more of them by my own design and then... Obtain the Ravenclaw robe and tie and Hogwarts... Here I come!!!
@A.F.-.
@A.F.-. 3 жыл бұрын
Pffft wheres my gryffindors?
@naziamansoor5646
@naziamansoor5646 3 жыл бұрын
Here's another way that doesn't require hot glue or chopsticks! 1. Go outside and find a nice, sturdy stick and snap it to how long you want it. 2. Come back inside and wash it thoroughly. 3. Grab a knife (or just use your hand and peel) and cut the bark off. 4. Get some sandpaper or a nail filer ( or continue using the knife) and scratch the stick to make it smooth and your desired shape. 5. Grab a piece of paper, cut it in half the long way and roll it up and glue it so it stays rolled up. 6. Wrap it around your stick in any design you want and glue it. 7. Paint it in anyway you like. 8. Enjoy!
@shivangisirsat3171
@shivangisirsat3171 3 жыл бұрын
Can you send some photos of the wand here to get some reference ?
@adolescent3750
@adolescent3750 3 жыл бұрын
TY YAY
@IHaveAFatherButHesAbroad
@IHaveAFatherButHesAbroad Жыл бұрын
@@shivangisirsat3171 late reply : you can't send in youtube
@mischievousloki2341
@mischievousloki2341 4 жыл бұрын
just go outside and find a cool stick and wash it off and paint it 0.0
@BrendaSoto
@BrendaSoto 4 жыл бұрын
an intellectual 👁👄👁✨
@imposter4518
@imposter4518 3 жыл бұрын
i did that and by the next day i hated it
@maura1214
@maura1214 3 жыл бұрын
That’s what I was thinking. Widdle a wand out of a stick
@2008_Mom
@2008_Mom 4 жыл бұрын
I found this 2 days ago and am doing it on June 1st 2020
@princejehielyan5114
@princejehielyan5114 4 жыл бұрын
BRENDA SOTO makers of fine wands since 2020 AD
@bruhe278
@bruhe278 3 жыл бұрын
I’ve already gone broke from buying the house robes so this really helped, thanks!
@Fatima-hk5pu
@Fatima-hk5pu 5 жыл бұрын
Tnk for the help me and my friends are making a wand and this would be esay btw new subscriber here can't wait to see other video in the future
@xienbptwbts8904
@xienbptwbts8904 4 жыл бұрын
this is A M A Z I N G! Imma do my Slytherin themed one and slither one in to my friends bag cuz she loves draco
@BrendaSoto
@BrendaSoto 4 жыл бұрын
So thoughtful! Your friend is lucky to have you.
@xienbptwbts8904
@xienbptwbts8904 4 жыл бұрын
@@BrendaSoto i am lucky to have u reply too😅
@lukaurbankitek6019
@lukaurbankitek6019 3 жыл бұрын
That's some a-tier friend right here.
@xienbptwbts8904
@xienbptwbts8904 3 жыл бұрын
@@lukaurbankitek6019 haha thank you 🙃
@dqvidbowie
@dqvidbowie 3 жыл бұрын
lets be honest, we all need a friend like you
@nova_ent.official
@nova_ent.official 3 жыл бұрын
Can we appreciate how she still hearts comments :')
@highercreative
@highercreative Жыл бұрын
I am seeing so many hufflepuffs and slitherins and ravenclaws, where are my griffindors?? Cmon we can do better.. 🤪😁😉😏🦁
@skittlesoriginal3214
@skittlesoriginal3214 4 жыл бұрын
I can make a harry potter wand at school now!
@IsAblee28
@IsAblee28 3 жыл бұрын
A friend asks you what your wand is made of, you answer 'Chopsticks' 🙃🔫
@brandon2948
@brandon2948 3 жыл бұрын
Wow Tanks To Make Dis Vidoe And Tips to make a wand i did it els wel like you didi and my r.... was so beutiful.
@doapin6240
@doapin6240 3 жыл бұрын
Me who’s too broke to get the materials: ok time to get a stick and carve it
@kenzie_mar321
@kenzie_mar321 3 жыл бұрын
So cute! I’m definitely going to be making one soon. I think I wanna make one black with blue and bronze or silver for Ravenclaw 😊
@niamh1406
@niamh1406 3 жыл бұрын
I used the first one and it turned out great! Thank you for this amazing tutorial!
@shivangisirsat3171
@shivangisirsat3171 3 жыл бұрын
You have maded a Beautiful Wand, !!I just love it
@penn912
@penn912 3 жыл бұрын
Thank you so muchhh🥺✨new subscriber
@a2Bz
@a2Bz 3 жыл бұрын
It would be also cool if it was a drawing wand.....
@empopkes
@empopkes 3 жыл бұрын
mine actually turned out good
@phoebelittlecamper769
@phoebelittlecamper769 3 жыл бұрын
The blue one on the thumbnail caught my eye
@highercreative
@highercreative Жыл бұрын
Ya me too
@SummerinDecember01
@SummerinDecember01 3 жыл бұрын
I think chopstick is the perfect choice for these diy thing
@HopeHendershot-Moskal
@HopeHendershot-Moskal 3 жыл бұрын
I made one and put a plastic rose on the end before the hot glue dried.
@maxvali
@maxvali 2 жыл бұрын
Today I will try to make a wand from a sushi stick, it's just amazing
@cloudk6569
@cloudk6569 3 жыл бұрын
Tip for people using nail polish; please make sure you open up a window after as the smell can be very toxicating
@navyaajain6208
@navyaajain6208 3 жыл бұрын
your wands look super good and legit look like were bought from the studio
@BrendaSoto
@BrendaSoto 3 жыл бұрын
Thank you!
@ColinandShanefun
@ColinandShanefun 3 ай бұрын
This actually works I would recommend it
@aesyulllii
@aesyulllii 3 жыл бұрын
I can't use hot glue gun and I dont have a hot glue gun.. Aww 😕😔🙁😭
@name_1129
@name_1129 3 жыл бұрын
I see, we're sacrificing a lot of hot glue and pencils. 👌
@bonniebennett7093
@bonniebennett7093 3 жыл бұрын
I DONT HAVE A GLUE GUN AAAAAAAHHH
@warmfrog6980
@warmfrog6980 3 жыл бұрын
theres tons of substitutes, be creative! i think regular glue should work.
@axiry2102
@axiry2102 3 жыл бұрын
Nicè I Made 2 Wands From Your Amazing Tutorial Thank you so much!!! :D
@Nelligan13
@Nelligan13 3 жыл бұрын
Thanks for this tutorial! My sons very into Harry Potter right now and asked Santa for a wand!
@iiallyxx6700
@iiallyxx6700 4 жыл бұрын
Thank you for this amazing tutorial! Now i could make wand for my school costume day! 🥰👍🏻
@Cookieuniverse77
@Cookieuniverse77 3 жыл бұрын
Best
@aleishailagan5813
@aleishailagan5813 10 ай бұрын
Thank you for this, helped a lot for my brothers costume event at school!
@BrendaSoto
@BrendaSoto 10 ай бұрын
Yay, I'm so glad 😊
@abdulsattaramiri8765
@abdulsattaramiri8765 3 жыл бұрын
OMG TYSM YOU HELPED ME MAKE MY FIRST WAND FROM A PAINTING BRUSH
@halfeaten_omelet9297
@halfeaten_omelet9297 3 жыл бұрын
Thank you so much! I can’t wait to go to the store and buy supplies for this!
@carlaaxxa3031
@carlaaxxa3031 3 жыл бұрын
Omg I’m the 1000th person to have liked this video! COOL xd
@christianojamil8155
@christianojamil8155 3 жыл бұрын
Thank you so much! This helped me so much!
@coltonsgymnastics
@coltonsgymnastics Жыл бұрын
Can you use cotton balls for instead of the hotglue
@BrendaSoto
@BrendaSoto Жыл бұрын
Sure, you’d have to make sure to compact the cotton balls so it’ll be sturdy.
@coltonsgymnastics
@coltonsgymnastics Жыл бұрын
Also, can I use Elmer glue instead of the hotglue
@BrendaSoto
@BrendaSoto Жыл бұрын
Yes
@TheKrishsav
@TheKrishsav 3 жыл бұрын
It was great I loved the way my wand turned out.Thanks:):):)
@uwaisalqarni8687
@uwaisalqarni8687 3 жыл бұрын
It is best and easy!!
@uwaisalqarni8687
@uwaisalqarni8687 3 жыл бұрын
It is best and easy!!
@Andromedawillems
@Andromedawillems Жыл бұрын
thank u soo much it is very helpful ❤❤❤❤❤
@BrendaSoto
@BrendaSoto Жыл бұрын
I’m glad ☺️
@Tichiiya
@Tichiiya 4 жыл бұрын
I have a question, could you fill the wand with anything else other then clay or hot glue?
@BrendaSoto
@BrendaSoto 4 жыл бұрын
I'm not entirely sure but paper mache could work! You would have to work in layers and it would a few days to complete. First method: Add little bits of paper mache pieces into the cone and squish it down to make a solid layer, about one inch, then let it harden completely. After a layer is dry repeat the steps until the cone is filled. Second method: Fill the cone with crumpled pieces of paper or rolled up paper. Then wrap a layer of paper mache onto the outside of the cone (not inside the cone) and be sure to cover the cone opening too, let it harden completely (24 hours). Repeat the process of adding paper mache over the cone two more times (you can also cover the entire wand if you wish), letting each layer dry completely. This is to make sure the wand is sturdy enough. The wand design could also be completed with paper mache, layering bits as needed to create your desired look.
@Tichiiya
@Tichiiya 4 жыл бұрын
Brenda Soto omg thank you so much! and thanks for replying in full detail what to do!!
@nat-lynn7
@nat-lynn7 4 жыл бұрын
Can you use yarn or tape instead of a hot glue gun? I have a wand but I want to make another one.
@BrendaSoto
@BrendaSoto 4 жыл бұрын
Yes! I think yarn taped on would create cool textures.
@Watermelonanimations125
@Watermelonanimations125 Жыл бұрын
Hello! I watched the chopstick section of the tutorial, and I was wondering, can I use those school glue things you would usually see in elementary school art class? Edit: By the way, I only mean for the beginning part where you put a dot right above the chopstick center
@joshmalloww
@joshmalloww 3 жыл бұрын
Thats super cool! I made one (took me about 7-10 minutes), and it was very easy! Since, i cant use glue guns, i just used paper and wrapped it around the side
@Itsmecheska-w2p
@Itsmecheska-w2p 3 жыл бұрын
I made it even tho its not that ok but im practicing doing 4 wand for the 4 houses
@BrendaSoto
@BrendaSoto 3 жыл бұрын
I love this energy ✨
@Itsmecheska-w2p
@Itsmecheska-w2p 3 жыл бұрын
@@BrendaSoto thanks
@shyamalamurthy7811
@shyamalamurthy7811 4 жыл бұрын
Usually the wand' colors are brown know?🤔🤗
@BrendaSoto
@BrendaSoto 4 жыл бұрын
Yes most of them are different shades of brown. Voldemort's wand is ivory. Some other wands are black, black/brown, or black/silver.
@hannahatiq5135
@hannahatiq5135 3 жыл бұрын
Dracos is black
@xynia771
@xynia771 3 жыл бұрын
What do i do if i dont have a hot glue gun?🥺
@BrendaSoto
@BrendaSoto 3 жыл бұрын
Regular glue or tape should hold the wand together. To fill it, try air-dry clay, papier-mâché, or foil. For the design, add a layer regular glue then stick on some thread on top, wait for it to dry then repeat as necessary to create your desired look. Once dry and set, paint it.
@Aarushpro0909
@Aarushpro0909 11 ай бұрын
I have a question how did you do the glue gun thing when you were showing your old wand where the design was complex
@BrendaSoto
@BrendaSoto 11 ай бұрын
Adding more or less pressure on the glue gun helps control the thinness/thickness of the glue lines. That's how I made that wand. Also I suppose if you're quick enough, using a toothpick or bobby-pin to guide the glue on the wand before it sets can help you make unique designs.
@Aarushpro0909
@Aarushpro0909 11 ай бұрын
No no I meant that when you were showing the thing you were doing the glue gun thing but the colour was coming out with the glue so how'd you do that
@BrendaSoto
@BrendaSoto 11 ай бұрын
It was a demonstration motion. The glue I used was clear then once it dried I painted over it with gold paint. Colored hot glue sticks do exist in stores and online - I suppose you could use those if you wanted to.
@Aarushpro0909
@Aarushpro0909 11 ай бұрын
@@BrendaSoto ok Thank you so much
@idotnknow
@idotnknow 3 жыл бұрын
Thanks
@Zaa.rah_
@Zaa.rah_ 4 жыл бұрын
I have a question, for the pencil one can we not use hot glue?
@BrendaSoto
@BrendaSoto 4 жыл бұрын
You could use tape or regular glue. For the design, string layered on top of the glue.
@Zaa.rah_
@Zaa.rah_ 4 жыл бұрын
@@BrendaSoto Okay thanks for telling
@agames2321
@agames2321 3 жыл бұрын
Ty
@Werewolfqueen449
@Werewolfqueen449 Жыл бұрын
How did you get the pencil to stay in place because when I tried it, I can’t get the pencil to stay in place?
@fireheart5965
@fireheart5965 3 жыл бұрын
Omg thank this helped so much!
@tknandakumar6283
@tknandakumar6283 3 жыл бұрын
Here’s a tip for u if ur making ur wand using the first method : Instead of using the pencil for the tip u can can use a crayon for more of a smoother wand
@zixxxxxx_
@zixxxxxx_ 3 жыл бұрын
I’m really happy with the results thank you so much 🤍🤍🤍
@BrendaSoto
@BrendaSoto 3 жыл бұрын
You’re welcome 😊
@joy8386
@joy8386 3 жыл бұрын
the paper rolling part was so difficult but the rest is so fun
@Werewolfqueen449
@Werewolfqueen449 Жыл бұрын
How did you get the pencil to stay in place the whole time?
@joy8386
@joy8386 Жыл бұрын
@@Werewolfqueen449 i forgot but maybe i used hotglue or tape
@K3NDR-g1v
@K3NDR-g1v 2 жыл бұрын
I did the oposite of doing what u did lol i made my own without hotglue i used clay:D
@Demxnter
@Demxnter 3 жыл бұрын
No hate but just roll the paper with your fingers and not to waste hot glue use crumbs of paper
@milesneff07
@milesneff07 3 жыл бұрын
Could a colored pencil work for the pencil wand
@BrendaSoto
@BrendaSoto 3 жыл бұрын
Definitely!
@milesneff07
@milesneff07 3 жыл бұрын
@@BrendaSoto thanks!
@nataliealvarado632
@nataliealvarado632 5 жыл бұрын
Awesome video i loved this
@BrendaSoto
@BrendaSoto 5 жыл бұрын
Thank you!
@Rosie-eq1xb
@Rosie-eq1xb Жыл бұрын
I would do the pencil one but I don’t have a glue gun or paint 💀
@shanellebaitshoki5414
@shanellebaitshoki5414 2 жыл бұрын
My wand turn perfect because of this video
@Diana-lv7ij
@Diana-lv7ij 4 жыл бұрын
This was amazing and useful...thank you so much
@haniawajeehx1541
@haniawajeehx1541 4 жыл бұрын
Is it possible if we can roll the pencil in the paper then remove the pencil from it because I use all my pencils and paintbrushes
@BrendaSoto
@BrendaSoto 4 жыл бұрын
I think it could work. Perhaps gluing or taping the paper to itself while rolling it around the pencil all the way then carefully removing the pencil from the larger end of the wand. Using the excess bits of paper to make a thinner cone to affix the the point of the wand with glue or tape.
@haniawajeehx1541
@haniawajeehx1541 4 жыл бұрын
Brenda Soto thank you a lot ! Have a Amzing day stay safe
@BrendaSoto
@BrendaSoto 4 жыл бұрын
You're welcome, you too! 💛
@Motoko-d7h
@Motoko-d7h 5 жыл бұрын
Loved the video!
@BrendaSoto
@BrendaSoto 5 жыл бұрын
Thank you!
@Motoko-d7h
@Motoko-d7h 5 жыл бұрын
Haven’t seen anything better!
@BrendaSoto
@BrendaSoto 5 жыл бұрын
I'm happy this was useful!
@aaryadesai6224
@aaryadesai6224 Жыл бұрын
Thank you
@BrendaSoto
@BrendaSoto Жыл бұрын
You're welcome :)
@bloodinfire6828
@bloodinfire6828 2 жыл бұрын
I dint need to add hot glue it was already hard idk why
@putanginamomaeanne
@putanginamomaeanne 4 жыл бұрын
Hello so i have a question Can my wand handle apparently be circular? I actually created a Half Dolores-Half Regular wand so basically if i can do that to my wand design how hard does it take to create? Thanks!
@BrendaSoto
@BrendaSoto 4 жыл бұрын
It's possible, requires patience/caution, and take maybe an hour or two to complete. If you intend the wand handle to be Dolores inspired, I wouldn't use an entire sheet of paper to roll the wand because I worry the circle handle would be too thick. I would stop maybe half way (4 rolls about), cut off the excess and tape or glue the paper down. Fill the cone with hot glue as best you can, then with the glue gun carefully lay rings of glue around the wand handle, let it set for a few seconds then keep layering until I have the desired roundness. With the residual heat of the glue gun, smooth out any imperfections. Once you're happy with the look, paint it. Hope this helps. Best of luck!
@putanginamomaeanne
@putanginamomaeanne 4 жыл бұрын
Brenda Soto oh ok, thanks!
@lenabg5257
@lenabg5257 3 жыл бұрын
Can I make wand with a starw?
@Itsmecheska-w2p
@Itsmecheska-w2p 3 жыл бұрын
How do u use a glue gun so even?!!!
@o-maggiebernal3189
@o-maggiebernal3189 3 жыл бұрын
What if I don't have a glue gun? Nail polish? Or paint?
@BrendaSoto
@BrendaSoto 3 жыл бұрын
I don’t know my dude. Maybe papier-mâché?
@jude1515
@jude1515 3 жыл бұрын
They look great!
@ackerwoman16
@ackerwoman16 4 жыл бұрын
This is so great thanks
@BrendaSoto
@BrendaSoto 4 жыл бұрын
You're welcome! ✨
@youtube_user2314
@youtube_user2314 3 жыл бұрын
This is amazingggg!
@thantmoe666
@thantmoe666 11 ай бұрын
How many glue sticks spend on one wand?
@BrendaSoto
@BrendaSoto 11 ай бұрын
Probably half a glue stick, it’ll depend on the length it’s cut to.
@haniawajeehx1541
@haniawajeehx1541 4 жыл бұрын
Can we use glue stick to stick the paper
@BrendaSoto
@BrendaSoto 4 жыл бұрын
Yes
@shanellebaitshoki5414
@shanellebaitshoki5414 2 жыл бұрын
Does it work
@Haveyrcakeandeatit
@Haveyrcakeandeatit 3 жыл бұрын
Omg tysm
@Lyr1calWonders
@Lyr1calWonders 2 жыл бұрын
What to use if you don’t have hot glue?
@highercreative
@highercreative Жыл бұрын
You can roll some very thin pieces of paper up and use that for the outward 3d design and as she replied to a couple other comments, put paper maché inside for the strong base. I hope this helped you and anyone else reading!! 😋😁😌😉
@goriwalaroshni
@goriwalaroshni 4 жыл бұрын
Hey ! So is there any thing else I could use instead of hot glue for filling my wand ?
@BrendaSoto
@BrendaSoto 4 жыл бұрын
I wrote this for someone who commented the same: Paper mache could work! You would have to work in layers and it would a few days to complete. First method: Add little bits of paper mache pieces into the cone and squish it down to make a solid layer, about one inch, then let it harden completely. After a layer is dry repeat the steps until the cone is filled. Second method: Fill the cone with crumpled pieces of paper or rolled up paper. Then wrap a layer of paper mache onto the outside of the cone (not inside the cone) and be sure to cover the cone opening too, let it harden completely (24 hours). Repeat the process of adding paper mache over the cone two more times (you can also cover the entire wand if you wish), letting each layer dry completely. This is to make sure the wand is sturdy enough. The wand design could also be completed with paper mache, layering bits as needed to create your desired look. Or use regular glue then add yarn or string on top.
@cyberkklan
@cyberkklan 4 жыл бұрын
I have a question: what do you do if you dont have hot glue??
@BrendaSoto
@BrendaSoto 4 жыл бұрын
Regular glue or tape should hold the wand together. Air-dry clay could work to fill it. For the design, place a layer of regular glue then stick on some thread on top, wait for it to dry then repeat as necessary to create your desired look. Once dry and set, paint it.
@cyberkklan
@cyberkklan 4 жыл бұрын
@@BrendaSoto thanks
@hm-gp5yc
@hm-gp5yc 4 жыл бұрын
I don’t have a hot glue gun?
@christineteetv9769
@christineteetv9769 4 жыл бұрын
LittleBoyJam123 X, I just used nail glue and on another i used lash glue it won't be as sturdy but you could probably just use liquid/stuck glue but if your filling in the back it'll take longer
@Tichiiya
@Tichiiya 4 жыл бұрын
ChristineTEE TV So you can fill the back with just normal glue?
@mariachimasashige6800
@mariachimasashige6800 4 жыл бұрын
Can i use a different kind of paint? Or does it have to be like acrylic
@BrendaSoto
@BrendaSoto 4 жыл бұрын
Any paint works!
@mariachimasashige6800
@mariachimasashige6800 4 жыл бұрын
Oh thank god then i only need to buy the glue anyway thx
@univxrse-g6q
@univxrse-g6q 4 жыл бұрын
@@mariachimasashige6800 you can use yarn/cotton or even wool to put it around the wand and for the inside you can either add clay or paper mache 😊
@mariachimasashige6800
@mariachimasashige6800 4 жыл бұрын
@@univxrse-g6q oh! Thanks!
@claudia7586
@claudia7586 3 жыл бұрын
Which glue should I use to fill the wand bc i don't have a hot glue gun
@BrendaSoto
@BrendaSoto 3 жыл бұрын
I'm not sure any other glue would work. You could try filling the cone with air-dry clay or maybe papier-mâché or foil.
@claudia7586
@claudia7586 3 жыл бұрын
@@BrendaSoto ok thanks (and happy new year🥂🥳) 😊
@barbhenry2309
@barbhenry2309 3 жыл бұрын
What if you don’t have a hot glue gun
@BrendaSoto
@BrendaSoto 3 жыл бұрын
Tape or regular glue can work to hold it together. Air-dry clay could work to fill the cone. For the design, regular glue and string or yarn of some kind.
@emiwielebinska8136
@emiwielebinska8136 9 ай бұрын
Are you a fan of harry potter ?
@BrendaSoto
@BrendaSoto 9 ай бұрын
yes
@quanbach4956
@quanbach4956 3 жыл бұрын
What can you use besides hot glue cause I don't have any?
@fortnitegod_849
@fortnitegod_849 3 жыл бұрын
I used Elmers glue. Worked for me.
@BrendaSoto
@BrendaSoto 3 жыл бұрын
Regular glue or tape to hold it together. To fill it, try air-dry clay or paper mâché (this would take a long time).
@onyx6692
@onyx6692 4 жыл бұрын
Isn't this a bit short
@grandpaloni8819
@grandpaloni8819 3 жыл бұрын
I feel like the waste of hot glue filling is the risk I'm willing to take, but I don't think my mum will
@sunidhi_377
@sunidhi_377 3 жыл бұрын
I am very unlucky because my parents are not buying wand for me and we don't use chopsticks because wer are Indian and then with paper I don't have brown paper and also I don't have acrylic paint😔😔
@BrendaSoto
@BrendaSoto 3 жыл бұрын
✨a chance to be ultra creative with finding other materials to use!✨ Paper can be dyed with coffee or tea and an old paint brush, makeup brush, or pencil can be used for the base
DIY wand with crystal or bead detail Tutorial
14:58
Magical Curiosities
Рет қаралды 684 М.
How To Make Your Pottermore Wand + Box!  Harry Potter DIY
18:09
Wizardry Workshop
Рет қаралды 271 М.
Остановили аттракцион из-за дочки!
00:42
Victoria Portfolio
Рет қаралды 3,8 МЛН
How do Cats Eat Watermelon? 🍉
00:21
One More
Рет қаралды 10 МЛН
отомстил?
00:56
История одного вокалиста
Рет қаралды 7 МЛН
Офицер, я всё объясню
01:00
История одного вокалиста
Рет қаралды 4,3 МЛН
Woodturning - The Deathly Hallows Part 1 (Elder Wand)
9:55
Jack Mack Woodturning
Рет қаралды 174 М.
14 Magical Homemade Harry Potter Crafts
10:05
Craft Factory
Рет қаралды 3,4 МЛН
Opening 24 Harry Potter Mystery Wands From Walmart | Magical Artifacts
23:05
The Potter Collector
Рет қаралды 179 М.
How To Make Harry Potter Wands! DIY Paper Prop Craft (Easy) ✨
8:40
Mustard Makes
Рет қаралды 115 М.
DIY Wand + Box!
14:42
Wizardry Workshop
Рет қаралды 223 М.
How To Make Harry Potter Wands! DIY Witch and Wizard Magic Wands!
9:30
Blind Harry Potter WAND Challenge! ft. Cherry Wallis and Tessa Netting
13:02
How to Make Wands with Chopsticks & Writing Pens!
11:51
Jenn's Creativity Corner
Рет қаралды 6 М.
Остановили аттракцион из-за дочки!
00:42
Victoria Portfolio
Рет қаралды 3,8 МЛН