Easy Engine Bay Detailing - How To Wash Your Dirty Engine Bay With Two Products!

[@ChemicalGuys]

Detail Your Engine Bay! - Nonsense All Purpose Cleaner: bit.ly/3Poqjjo - VRP Dressing: bit.ly/3Ra1uJh - All In The Details Brush: bit.ly/3Lafpva - Workhorse Microfiber Applicator: bit.ly/3L7rIZ2

[@tranfamily35]

I used air compressor to blow all the dust off before doing this. Works great

[@stevengarlow2581]

I bought the engine compartment package this week. I spent the last hour or so cleaning the bay. I have to admit it was easier than I expected. Those brushes really make the job a snap and the nonsense cleaner is awesome. Great products and I would recommend them to anyone who wants to tackle this themselves.

[@SAHamel_]

did you dilute the product?

[@Rodvous]

Glad to learn waterless/sprayless with the products and tools you already sold me!

[@ChemicalGuys]

🤩🤩

[@constantinepsihogios2847]

Thanks for this very needed video. Not everyone has access to a pressure washer, nor do they have the knowledge to clean an engine bay with water. Thank you!! Costa

[@ChemicalGuys]

Glad it was helpful!

[@justinlawrence6790]

It's safer not to use a pressure washer, just hose pressure. But still a very valid comment.

[@xxfanboixx]

simple green works too< much cheaper as well!!!

[@ryanshutz4748]

VRP is great for so many different areas. I put it on my dash like 2 months ago and it is still shiny. I like nonsense too. Diluted 7:1 it still cleans and foams great.

[@ChemicalGuys]

Enjoy your detailing products!

[@mydreaminorbit9297]

Exactly how I clean my engine bay. No water just these two great products.

[@Deanz09]

Hi. Do you dilute the Nonsense Cleaner or do you use it undiluted? Thanks 👍🏼

[@woocoheed]

@@Deanz09full strength if it’s this dirty. Nonsense doesn’t leave residue, so it’s pretty easy to use

[@Deanz09]

@@woocoheedThank you! My engine is not so dirty, so I could dilute it with 1:10, right?

[@woocoheed]

@@Deanz09yep, it will have less suds but still have cleaning power

[@ChemicalGuys]

Happy detailing!

[@DroneStrike1776]

As a 2019 Mazda3 hatchback AWD, this video motivated me to clean my engine bay.

[@ingeborg8587]

Nice! Thank you for this video. I was searching for a video for washing the engine, because I have just a new car and I want to keep it tight there this time. I only saw video's where detailers uses a lot of water, some of the detailers even took some parts out of it. But I am not so confident to do that. Now with your video I know now how to clean it also, but in a simple way. Thanks again! 😄👍

[@reydecastro6651]

Thanks for showing no-water cleaning. Last time I took a water spray to my engine, water -that turned into steam- destroyed the "micro chips" that control my spark plugs.

[@ChemicalGuys]

Thanks so much for tuning in!

[@matsudakodo]

Technically that isn't possible, just as a water leak in a watercooled computer won't hurt anything (because it's pure water). If it's tap water though it contains conductive minerals. Sorry to hear but I'm guessing what happened is the car was started before it had a chance to dry out?

[@ozzi4627]

​@@matsudakodoauthor explained what happened to his car based on what he did...dont dismiss that with your own theory ,he did not ask for possible causes...he simply acknowledged CG for the video in helping him. Enjoy the vids and skim past comments that you can not be helpful on or be helped with(where you ask for advice)

[@matsudakodo]

@@ozzi4627 your comment is the unhelpful one. I suggest you skim past if you don't have anything to provide.

[@dvader3000]

​@@ozzi4627damn u got triggered by a simple comment

[@kibscott6096]

Thank you for showing how easy it can be to clean the engine bay, great video!

[@MrAnderson610]

Nice...! 😮😊 Oh, and the music selection is on point! 👍👍👍

[@ChemicalGuys]

Happy detailing!!

[@Lonewolf_Will2024]

Your videos and products are very productive. One thing I fail to see get done, is the hood and the hood latch. If we're paying attention to detail keep that in mind for your next engine bay dress up video. This things sometimes get over looked when in reality that should be the first detail to get checked off. Just an FYI. Again awesome video!!! 💪😎👌

[@danielntuli3313]

❤

[@juanvargasSAAA]

Two of my favorite Chemical Guys products. Great video!

[@ChemicalGuys]

Glad you enjoyed the video!

[@aaronmelson2887]

I’ve used a garden hose and a spray bottle with dish soap to clean my 2020 chevy impala about 5 times now and haven’t had an issue. But this method in the video is a good alternative.

[@BreezyMcSleezy]

Did you take out the battery or cover the electronics when you spray?

[@marksmith8210]

You just need to disconnect the negative cable the cover the battery and fuse box. Degreaser if seriously neglected or soapy water if just a little dusty and rinse...no real need for pressure washing which can damage wires or anything fragile.​@@BreezyMcSleezy

[@ronroberts7566]

Just went to your website and ordered the products, going to try it myself, appreciate the video

[@ChemicalGuys]

Enjoy your detailing products!!

[@alvarocarino1469]

I really do appreciate you making this video, I learned a lot.

[@ChemicalGuys]

Thanks so much for being part of the Chemical Guys family!

[@Bullybeef972]

Just tried this today on my Mercedes C300 sport and came out beautifully like it just came out of the dealership. Thank you!

[@MrDandanhesourman]

I NEED THEESE PRODUCTS!!! That was a beautiful thing to witness.

[@ChemicalGuys]

Thanks so much for being part of the Chemical Guys family!

[@courtneymarie2858]

This was great! Thank you! Also, can this metro be applied to clean the hood portion too?

[@brandond5948]

Much respect to you guys! I appreciate all the knowledge you share.

[@ChemicalGuys]

Happy detailing!!

[@cliffmauck510]

Nice job, thanks for the video. I was able to pull the black cover off of the engine and clean also. Not sure if it is as easy on this car.

[@danf321]

Nice how-to! I use similar methods. But the dirt still remained down in between all those crevices the the brush and rag can’t reach. You’ll hate me, but I use Simple Green in a spray bottle, then use a high power hose to spray it all off. Once dry, I use a similar product to VLR but in a spray bottle to again get all the crevices shiny. It works pretty good👍

[@turbotonye-4124]

I’m an ASE certified mechanic I also have owned a detail shop. That work just fine. But that a clean engine bay covered in road dust. I power wash them it is so much faster and as long as you don’t hammer the fuse block your fine. Everything in there is designed to get wet. Please don’t think I’m being rude. It’s hard to understand context when reading comments. I use a lot of there products as i no longer own my shop. There is no need for me to buy from my supplier as 5 gallon jugs of product would be pointless for me at this point. I do about 12 cars/trucks a year now. I just don’t want someone to be afraid to power wash their engine bay.

[@nicholosk7280]

Great video 😊! I am learning so much watching and using your car cleaning products. Keep up the great work.

[@ChemicalGuys]

Glad you enjoyed the video!!

[@juliad2813]

Thanks again for this video. Finally did it. Not perfect but looks soooo much better.

[@chelsabailey1018]

Cool video on cleaning the engine bay of a car! Thanks for posting!!

[@ChemicalGuys]

Glad you enjoyed the video!

[@masteroftheuniverse7777]

@chemical guys yah the best hands down 💪🏼🙏🏼

[@ChemicalGuys]

Thanks so much for being part of the Chemical Guys family!!!

[@raymondperez3553]

Great job!! Joey I Plan On Cleaning My Engine Bay This Weekend?.. Thanks for Showing Us How To Do it!!👍👍🙂

[@ChemicalGuys]

🤩

[@CSltz]

I never really took the time with the brush. But I ‘ve had really good luck with a foaming tire cleaner and just letting it set. Coming back way later. And wiping it off with just a old rag. I have just opened the hood. Before the engine got hot. And just sprayed water on it with out to many problems. The silicone acts like water repellent. Just stay away from anything to greasy.

[@juliad2813]

Thank you! Always wanted to be able to do this for myself. Car is 5 years old, it’s time.

[@ChemicalGuys]

Happy detailing!!!

[@brookemichalski4265]

Wish this was done on an older car with more usage, so we can really see the products work. Any reason to not take the engine cover off and do the intake as well?

[@Hexa8]

I always use black on black on my engine bay and it always do wonders for my job❤

[@ChemicalGuys]

Enjoy your detailing products!!

[@stevenbroner5112]

Which would you recommend between VRP vs Back to Black?

[@ChemicalGuys]

Hey! Both are excellent choices for engine bay care. Black On Black covers more area in one spray and also works its way into crevices for a uniform finish with ease.

[@The_Great_Lopaka]

Just bought them both, along with some other stuff. Thanks a bunch 👍🏼

[@ChemicalGuys]

Enjoy your detailing products!

[@erniearambula3525]

Not using water is a great cleaning maintenance on an engine bay that's already been clean with water soap and as you said the whole sha bang.

[@ChemicalGuys]

Happy detailing!!

[@jimbob119874]

Thank you very much for this video! It was very helpful. Love your products as well! 🙂

[@ChemicalGuys]

Glad you enjoyed the video!

[@willsonmcburney8873]

Thanks Joey. Do you recommend using VRP on my boars hair brush to get in tight spots. I appreciate you showing how you did the hard parts this time!

[@ChemicalGuys]

Absolutely!

[@StrifeHale]

Heard that you need to be careful near the serpentine belt and timing belt area as the dust falling down will damage them and eventually the engine as well. I know this Mazda model doesn't have a timing belt so it was easy to clean.

[@SAHamel_]

I bought the products and used them today to clean my engine bay

[@ChemicalGuys]

Enjoy your detailing products!!

[@Tosha-bc4cq]

Is this cleaner also affective with an engine that has oil sludge throughout the engine? Also the area under the engine cover can that be cleaned as well?

[@ChemicalGuys]

Absolutely!

[@geoffreypleavin5268]

Did you use only two black micro towels or multiple to stop spreading the dirt around?

[@biggdawgg6932]

I have seen the chemical guys products but was not familiar with them. Glad I found this video. But what product can you use around the inside of door jams?

[@ChemicalGuys]

Hi there! Use your favorite quick detail spray or Nonsense All Purpose Cleaner to detail the door jamb.

[@anthonylakey9735]

you can use the "VRP" it works great also around the trunk and hood rubbers if you have them

[@izzkevy6512]

I really like this video because as an electrician water to electrical components goes against everything i ever learned 😂😂 so was very bery scared of that

[@ChemicalGuys]

Thanks for watching and thanks for being part of the Chemical Guys family!

[@geoffreypleavin5268]

Is this as good as using water to wash down which is the best method?

[@anatorres8004]

Muchos motores desde 2019 tienen una etiqueta that warns you about Not Wash!! So I love your way.

[@ChemicalGuys]

Thanks for watching!

[@johna4250]

Beautiful job.

[@ChemicalGuys]

Happy detailing!!

[@oliverlee1300]

Where did you get that two bottles? What the name? Thanks

[@jlrecoder1]

Great video, but…how about a muddy engine bay? Any tips or videos?

[@DB-dz3jq]

Nice video! I learn something new every time I watch. Thank you and keep the knowledge coming.

[@ChemicalGuys]

Thanks so much for being part of the Chemical Guys family!!

[@gorillamad7544]

So how is that VRP different to the Natural shine bottle?

[@ShowemRight]

I will buy some of your products, because I see them offered on Amazon too, my online store for things we need.

[@ChemicalGuys]

Enjoy your detailing products!!

[@Deanz09]

Hi Joey.. again a great Video 👍🏼. I‘m using since years several CG products! I‘m planning as well to clean my engine bay as you showed it in this video! Just a question.. do you diluted the Nonsense Cleaner or did you ise it undiluted? Thanks 👍🏼😊

[@lamNoJedi]

I always do the engine first with a pressure washer. I use chemical guys all clean +, Pressure wash it again. Then use the chemical guys air blower to dry. I have the old blue blower which looks like is discountined. Then finish it off with chemical guys silk shine. Ive owned multiple cars and never had any water issues doing it.

[@cpk2GIRL]

Can that product clean black vinyl hood decals?

[@tucksmith8300]

That’s a clean looking engine bay

[@ChemicalGuys]

😀

[@robertrobertson5120]

Very impressive! Enjoyed watching... but wishing you would do it for me!

[@ChemicalGuys]

😄

[@robertserrato3596]

Can you buy this product at auto parts stores.

[@ebonysteel9158]

Did wash this engine at all before you actually shot the video at least clean the heavy dirt or dust build up? I noticed this engine was not too bad at all as if this car is always parked in the garage and not outside much in the elements.

[@bradlevantis913]

No water is a really good method. My neighbor is a district service manager for a car manufacturer (I won’t say who). He was saying the sensors are made for splash resistance when new, but that degrades over time. Rinsing water in there is asking for trouble especially on a vehicle that’s a couple years old.

[@ChemicalGuys]

Thanks so much for your feedback!

Thats a blatant lie

[@carlosbriceno6687]

Hi Chemical Guys. I have a work to do with Computers and Laptops. I would like to know if I can use your products to make them clean and renew them. Of course, I have experience with electronic components just think that many people use Alcohol to clean surfaces and keyboards I don't. I prefer PH balanced chemicals and more of the cases I use Baby wipes to make the work But I am looking for your advice

[@bradbrown2168]

How long to do a bay?

[@sandeeprao1826]

Hii .. Can u plese explain how to clean door jambs/ fuel lids /wood

[@ChemicalGuys]

Hi there! Nonsense All Purpose Cleaner or your favorite quick detail spray can be used to detail door jambs, filler doors and tight spaces.

[@sandeeprao1826]

@@ChemicalGuys Car Emblem /Monograms

[@psalmboy_outdoor]

Would it be better to take off the engine cover?

[@jtbrown5801]

Good information thanks

[@ChemicalGuys]

Glad you enjoyed the video!!

[@UncleKrusty68]

Cool, but what about those cars that might have an oil leak that needs to be cleaned up. You need to clean one of my kids engines.

[@hexhead5732]

Good job bro👍

[@ChemicalGuys]

🤩🤩

[@markgeorge1967]

Awesome 👌 thanks bro 🎉

[@ChemicalGuys]

Happy detailing!

[@IceSmacker123]

Good I have both products! Awesome!!

[@ChemicalGuys]

Happy detailing!

[@SAHamel_]

This is the video for me because I've never cleaned an engine bay and I knew I was not going to use water.

[@tracynguyen6757]

Awesome job!!

[@ChemicalGuys]

Glad you enjoyed the video!!

[@jkdsteve]

How 'sticky' is the plastic after using CRO? I used to use another Chemical Guys product (Tire/Trim Gel) and it looked great but seemed to attract dirt... The downside of dry cleaning is that the engine remains greasy and dirty of course ;-)

[@nicolamilessmith7938]

Can I use this on my motorcycle engine

[@ChemicalGuys]

Absolutely!

[@yancyhammondjr]

Can I just spray the nonsense all purpose cleaner all around on the surface under the hood? Instead of spaying it on a towel or brush

[@anthonyguillen2564]

Ok I’ve done this like when I was 22 but now at 56 I really rely on light water pressure sprayed quickly across the engine. I don’t go to shows anymore

[@laurawilson9163]

I I I I I I I I I’m going to try this! Thank you!

[@ChemicalGuys]

🤩🤩

[@kevinkev1530]

Thank you

[@ChemicalGuys]

🤩🤩

[@gguajardo1012]

Why not HydroShield?

[@ChemicalGuys]

HydroShield is also a great choice!!

[@chuechang7547]

You miss a spot on the intake box product work though

[@ChemicalGuys]

Thanks so much for tuning in!

[@kafeerogerald251]

I want to start mobile car wash in Uganda that's why need to look for good products

[@deepakverma8608]

Awesome

[@ChemicalGuys]

😍😍

[@Thedaviddas]

"So now it looks better than you" LOL😂

[@ChemicalGuys]

😆

[@chm1701]

1:04. Or… both 😬

[@israel5236]

Foam cannon

[@ChemicalGuys]

Happy foaming!

[@popholmes5825]

Why not just take the beauty cover off to clean it. That way you can clean the underside too.

[@jh.f30]

Point less

[@jh.f30]

Less it's your own car

[@roybrazeau3486]

Good idea if I’m selling the vehicle.

[@ChemicalGuys]

Happy detailing!

[@johnnyquid3350]

Should have used a TORNADOR 🙋‍♂️👍

[@Captain-ql9te]

Nobody even halfway car literate keeps those useless plastic covers in place. So majority of the intake beneath that cover is still caked with crud.

[@geoffreypleavin5268]

Where is all the dirt going into the microfibre towels? Aren’t you just spreading it around.?

[@bobwilson2682]

Nice video, but most of us don't have the several hours you spent on that engine

[@ChemicalGuys]

Thanks so much for tuning in

[@WeAreNaturalJewelz]

😊Doesn’t take long at all! 20minutes and you’re basically done. Unless you have an old dusty dirty engine bay lol!

[@newbeginnings8566]

just pull off the plastic engine cover.. much easier to clean both sides

[@ChemicalGuys]

Good tip!

[@ptreeeproductions2167]

Bro you missed the bottom of the hood….

[@chinothedreamgiver1629]

Basically don’t be scared to clean your engine bay, just have some common sense and shine on. Patiently..

[@ChemicalGuys]

Happy detailing!

[@davem8360]

this is only cleaning the visible areas - not actually cleaning as a whole. plus, this is not a dirty engine.

[@steventraudt3441]

Great instruction. Horrible music though.

[@ChemicalGuys]

Thanks so much for your feedback!

[@dougpeters5849]

I fail to see how this method qualifies as 'Detailing'. Good products, but the method is lacking for 'detailing'. More like a 15 minute quick clean.

[@squallxvi]

hahaha yeah, if the bay is coated with dirt, oil, and grime; time to bust out the light-pressure hose!

[@bradj8215]

Why would anyone care what the engine on their crappy Mazda looks like. I understand on a high end sports car but I had a guy who wanted this done on his Chevy Cruze and while I was happy to oblige, I don’t get it.

[@thepavementendsnow1901]

Pride?