Easy Fix | Garage Door Not Close ($100+ saving tip: ft. Diagnostic Code 4 & 6 Flashes)

[@Spartan3448]

So helpful! Mine was refusing to close and kept saying obstruction. Cleared all debris and cobwebs and wiped the lenses. It still said obstruction. Double checked lights and wiring. (Solid yellow and solid green). It still said obstruction. Double checked that sensors aligned, and they were to within 1/16 of an inch. Finally, I moved the sensors close to supports for the track to reduce vibrations (as video mentioned) and now it works perfectly! Huge thanks. Not sure I would have ever thought of it.

[@BluebonnetU]

Great feadback!

[@lettyherrera1097]

Omg…. Thank you so much for this video. There is no way I could afford a service cal right now and this video solved my problem

[@BluebonnetU]

👍

[@manytimes7746]

Thanks for saving me $130! You are awesome. Please keep up the good work.

[@BluebonnetU]

💯

[@topdawg666]

Thank you ! After hours of troubleshoots with steady amber, green lights I was at a loss. I never would have thought to clean the lens thinking if the lights are steady I should be good. Couple of seconds with a damp napkin and thing works like a charm.

[@BluebonnetU]

Great!

[@rorycraft5453]

I just cleaned the lenses myself. Whew! Thanks Bluebonnet!

[@bryanspell]

Thanks! Your video also saved me a call to the garage door repair people and a ton of money.

[@BluebonnetU]

👍

[@jjjww975]

My garage door opener kept going up and down at various points - and had to hold the inside wall mounted button until it closed... I replaced BOTH Green light and Orange Light Sensors ($24) and fixed the problem. The Orange light is the primary sensor and the green light is the reflector. Then I moved both sensors higher so water/debris/bugs don't get into them or effect the wiring housing. Works fine now.

[@BluebonnetU]

Great work! Glad you fixed!

[@nimarzv]

Thank you! I didn’t spend hrs to troubleshoot i just searched the error online and saw your video and fixed the issue in 10 minutes

[@BluebonnetU]

Great!!

[@andreafoster1250]

Thank you so much for your additional troubleshooting suggestion to wipe the lens! I was trying for hours and did not have flashing lights; I was at a loss. Once I wiped down the lenses with a Clorox wipe I found a small spiderweb and removed it along with some dust. Sure enough, that did the trick! Thank you thank you thank you!!🙏🏽🙏🏽🙏🏽

[@BluebonnetU]

👍

[@golf5555555]

So far so good... Thank you for this video!

[@varietyvideofilmz]

thank you i watched several clips and yours was most helpful

[@BluebonnetU]

@@varietyvideofilmz Thanks!

[@pooyammehr]

Thank you! I kept adjusting the sensors until they aligned properly. It took a few tries.

[@BluebonnetU]

👍

[@Hannelore7]

Thank you. I never got a manual with my door.

[@kumeerpashamohammed1461]

Thanks worked like charm, had to adjust the height.

[@BluebonnetU]

😄👍

[@DragonXBlasterXRager]

Much appreciated your share. Just cleaned the both lens and worked again 😇

[@BluebonnetU]

👍👍

[@grantwong875]

Thanks! This was exactly the problem I had.

[@BluebonnetU]

Glad it helped!

[@lunaco2008]

Thank you for your video. You saved me a service call! God bless!

[@BluebonnetU]

😀👍

[@SlotJefe]

Thank you, my sensors needed cleaning, now it works like a charm

[@BluebonnetU]

👍😊

[@alexponce9083]

Back in action, thanks!!!

[@BluebonnetU]

😄😄

[@idarhodes5093]

This video is the 💣. Got me together in a matter of minutes. Thank you!

[@BluebonnetU]

Thanks. Don't forget to subscribe my channel!

[@davidabryant413]

Very helpful. It was the alignment

[@BluebonnetU]

👍

[@michaelvazquez8717]

You saved my butt! All I had to do was elevate my sensors. ❤️

[@BluebonnetU]

Thank you for your feedback! Glad it helped you.

[@hazlo623]

Helped just had to move up the sensors thanks

[@BluebonnetU]

👍

[@GaryReyes777]

Thanks 👍🏻 😊 moving my sensors up worked for me

[@BluebonnetU]

😀

[@jesusanchorofmysoulkatheri3648]

Thank you so much I was just panicking I couldn’t close my garage door after I was leaf blowing I couldn’t figure out what was going on!💝

[@jesusanchorofmysoulkatheri3648]

May God richly bless you for helping people!

[@BluebonnetU]

Good to hear from you now is Ok!

[@ZeroOneLA]

Thank you, saved me time and money

[@BluebonnetU]

👍😀

[@MikeDamone]

You saved my butt. Thanks man!

[@BluebonnetU]

😄

[@brizelgranados8138]

THANK YOU SO MUCH!😊

[@rezwan08]

Worked for me, thank you for the video

[@BluebonnetU]

😁👍

[@boblajeunesse2292]

You solved my problem.Thank you.

[@BluebonnetU]

Great!!

[@ytgt3668]

My door try to close and then reverses on its own. Notices 4up and 1 down arrow blinking lights in the door closing device. They green and orange lights in sensor are on and not flashing, seems steadily on. Can no see any obstructions in between. I try to set with the adjust button but door wont go down more than certain exact level each time. Anything you can think of which can be helpful for me ?

[@BluebonnetU]

Sounds like a different issue than mine. Pls check the manual of issue code: what I found from my manual - Manually open and close the door. Check for binding or obstructions, such as a brokenspring or door lock, correct as needed. If the door is bindingor sticking contact a traineddoor systems technician. If door is not binding or sticking attempt to reprogram travel(refer to page 26).

[@ShoeMD]

Helpful thanks

[@BluebonnetU]

👍

[@markverrett6447]

Thank you. It was spider webs.

[@BluebonnetU]

👍

[@thecreamofthecrop2694]

Cleaned my lens’ oiled all the moving parts of the door and My led’s are solid I can force the door closed by holding the button down and the error code goes away it opens back up by pushing the button once but the error code comes back when it’s fully open looks like I might have to reach for my wallet 😢😢😢😢

[@BluebonnetU]

Hope you solve the issue soon!

[@thecreamofthecrop2694]

@@BluebonnetU update my sensors were slightly out of alignment the green led was on but flickered slightly upon closer inspection and after tinkering a bit with it I figured it out THANK YOU SOOOOO MUCH FOR THIS VID I WOULDVE NEVER FIGURED IT OUT WITHOUT YOUR HELP!!! Left you a like and subbed best part is it cost me zero dollars just a little time and patience lol 👍🏿👍🏿👍🏿👍🏿

[@davidkimberling1468]

Thanks for the video !! This was very helpful, very frustrated about our garage door and have got it working very well now. Thanks again.

[@rylanrandolph8140]

Thank you 🙏

[@BluebonnetU]

You're welcome!