Easy Flow Rite Remote Drain Plug Control Installation for your Boat

How to DIY install a flowrite remote drain valve / plug switch on a Skeeter / Ranger/ Nitro / Phoenix / Triton / Stratos bass boat.
Located in Huntsville, AL, the Rocket City, I design and fabricate custom bass boat accessories that are 100% designed by me and manufactured in the USA. I ship USPS Priority Mail and typically same day.
Visit www.rocketcity... to purchase your bracket today!!
Flow-rite Remote Drain Plug Control Kit: amzn.to/3QG0muE
#ad - Affiliate Link - If you purchase, I will earn a small commission at no extra cost to you!
In this video I show you how to install a Flow Rite AKA SeaLok Controls MPA-RDP-010 Remote Drain Plug on my 2014 TZX 190 Skeeter Bass Boat. If you use my custom 100% made in the USA corner bracket you will not have to drill a big 1.75 inch hole in your fiberglass AND you can keep the switch away from kids or inadvertent opening! I'll go through all the tools you need and each step of the process. Super easy upgrade you can make to your boat!
SOCIALS:
Instagram: / rocketcityoutdoors
Facebook: / rocketcityoutdoors
TikTok: / rocketcityoutdoors
#bassfishing #bassboats #flowritecontrols #skeeterboats #tritonboats #rangerboats #nitroboats #basscatboats #seaclearpower

[@gregnettles3677]

This guy is stand up and his brackets are awesome.Nice doing business with you.

[@rocketcityoutdoors]

Thank you! New designs coming soon. Make sure to check out rocketcityoutdoors.com in the future for updates

[@davidjessee7701]

One tip… assemble everything on the drain plug side on the work bench, then feed the other end of the cable through the drain hole from the outside then secure to the transom.. that way your not doing everything on your head or on the ground underneath the motor…

[@aaronpalmer6655]

Run the bit in reverse first to prevent the gelcoat from cracking. Also use a bigger bit to recess the hole slightly and run the bit in reverse for this as well.

[@ammogiant824]

To prevent gellcoat from cracking, use a counter sink bit after your first hole drilled. This also will help prevent spyder cracks.

[@Tok-aded15]

Thanks for the tip! Worked great.

[@bigbuck2720]

Nice idea with the bracket need to sell idea to Flo right, made my own from plastic ammo can

[@melvinrawlings1457]

Drill in reverse for a little ways then go in forwards

[@urbandeary4389]

Cover the surface with blue painters tape first, then mark your holes, now you can drill the same slow way you did in the video.

[@Tok-aded15]

Thank you for the video! Purchased your bracket and got mine installed today. I encourage anyone who wants a remote drain plug to go this route. Very simple and easy.

[@rocketcityoutdoors]

Thank you! If you don’t mind, please send pictures of your install to [e-mail]!!

[@notsogood6249]

Place tape on the fiberglass prior to drilling your hole.

[@fishfever5923]

i just placed an order for the 90 degree bracket yesterday from the website, will I get a notification or tracking once the bracket is shipped out?

[@rocketcityoutdoors]

Yes, you should’ve got a message about it being shipped

[@rocketcityoutdoors]

Check your spam folder and shoot me an email at [e-mail] if you still don’t see it

[@frantyf]

@@rocketcityoutdoors did you send to Spain?

[@alengling5973]

No link for the corner bracket with lips for mounting flow-rite

[@rocketcityoutdoors]

www.ebay.com/itm/275371742229

[@jgrove1224]

Are you the guy that has an eBay store? If so, we live very close and I need to pick your brain.

[@rocketcityoutdoors]

Yeah that’s me

[@rocketcityoutdoors]

Where do you live?

[@jeremyhargrove9714]

I’m in meredianville, I want one of your battery’s on/off brackets and was wondering if I could just pick it up?

[@jeremyhargrove9714]

Also, do you fabricate delete plates for the bow?

[@rocketcityoutdoors]

Yeah that’s fine. Send an email to [e-mail]