EASY How To Thread Brother 1034D Serger!

[@kathyw9952]

You made this video 3 years ago and I’m sure you never anticipated that years later you’d be an answer to a prayer! I live in Hendersonville NC, not far from Asheville, and we have just been devastated by Hurricane Helene. I’m blessed to have a generator, but we have a shelter-in-place order due to the floods, mudslides, and downed trees and power lines. As a person who wants to get out and help others, I’m going crazy, and this morning I prayed for patience and a way to distract my mind. I tethered my ipad to my iPhone (we have no Internet) and your video came up, and I have never used my serger due to fear-of-threading. LOL. So thank you! As I am now threaded and serging away!!

[@BlueprintDIY]

I am so sorry to hear about the hurricane, but I’m glad I could help in a small way! 🙌🏾

[@007Julie]

I’m so sorry for what your state is going through, praying for all of you. Stay strong!

[@kathleenstoin671]

My niece lives in Hendersonville. I'm so sorry for what your entire area has been through! Wishing you the best!

[@tlsnana9539]

It’s been 3 months since you commented. How are you doing now? We lived between Hendersonville and Fletcher , years ago. I never dreamed something so horrific could happen. I’m so sorry for you.

[@ltlbear06]

Can you tell me what tension you would use if you were serging tulle organza???

[@sherryhenrickson525]

EVERY time I have to thread my machine, I come back to your video. It is way more helpful than any other I've seen and definitely more helpful than the instruction booklet. THANK YOU.

[@Juliamay67]

Me too. Thank you!!!

[@helen3998.1]

Me 3. Today I finally wrote the number order on the machine

[@sandyc3141]

Was feeling a bit intimidated. After watching the video and following step by step 🙌 🙌 I was able to thread it on my first shot! This video is very direct and to the point. I appreciate your not filling the video with extra chit chat. Super informative and I am thankful for the time you took to make this video.

[@BlueprintDIY]

Thanks so much! 🙏🏾

[@elsiewalton4216]

Thank you very much for your instruction on how to thread my sergers sewing machine, you dit it like a professional not any unnecessary garbage but to the point.

[@trerodriguez]

Same. Thank you for this video!

[@1Ladybuilder]

I came to the comments to say the same thing! Have watched several other videos without success & got very frustrated - meaning I avoided using my serger for a long time. Your video was perfect and I got it right on the first try. Now I’m ready to tackle a few projects I’ve had on hold. THANK YOU!!! 👍

[@marykaren7542]

I just bought this serger. My husband had bought me a 5 spool Singer serger last Christmas and it was WAY to intimidating for me. I packed it back up and returned it. I saw a video on KZbin about how easy this one is to thread. Thank you for taking the time to demonstrate how to thread it.

[@prettycutandgrow8240]

This was the best tutorial for this specific brand. I got the same one for my birthday and had no clue for the first 2 steps. I'm more of a visual learner, so YHANK YOU for this very clear and precise instructions. HAPPY CRAFTING.

[@SCG99]

So helpful and easy to follow! I can't even express how grateful I am that you and others in the sewing community share videos like this to help us new people out!

[@GrammaPatriot]

I'm fairly new to sewing, and I'm 65 years old. You, young lady, are so easy to follow instructions with. I am thinking about getting this exact serger and when I looked for a tutorial on how to use it, I found you. I'm so glad I did. Looking forward to viewing your other videos. Thank you so much for sharing this with us. God bless : )

[@BlueprintDIY]

Yayyy, it’s never too late to start something new. I admire that so much! Happy sewing and welcome to the BlueprintDIY family! 🤗

[@beckymorey6414]

You don’t know how many times I have come back to this video for a refresher when my machine is acting funky. Thank you for the help!!

[@BlueprintDIY]

You are very welcome! Glad it’s been helpful 😊

[@Sisikoko1]

An answer to a prayer even after 4 years Thank you

[@sheronwoods568]

I have had my brother lock 1034D for years and I just pull it out of the box and watch your video and thanks to you I know how to thread my serger with no problem for a beginner. Now I wish I. A learn to sew just that easy.

[@michelletatecrayton529]

I have always had issues threading this serger. Thank God for you and this video. Your process made it so easy and simple. THANK YOU!!!!

[@4maxine1]

This is the second time I have utilized your video and I am so thankful for it. I have a hard time with written instructions and need a visual. Yours is absolutely perfection. I thank you again, you are amazing!

[@SewAndTellwithDori]

EXCELLENT, EXCELLENT VIDEO!!!!!!!!!!!!!!! I'm just getting back into garment sewing again and have pulled out my Brother 1034D Serger. Last time I used it was.... 5 years ago? Changed out the thread this afternoon and had all kinds of problems, one of which was a broken needle. Then, couldn't find the hex wrench that came with the machine. So frustrating! Decided to quit for the day and look for a YT video. I'm so very, very happy to have found this video and now I can't wait to get back into my sewing room (in the daylight) and get the machine up and running again. Thank you so much for taking the time to make and post this video! 🥰🥰❤⭐😆🤗

[@BlueprintDIY]

Yayyy, I’m so glad! Happy sewing!

[@loissage3630]

I watch this video everytime I change thread on my Brother 1034D…… smart video!

[@MissChristieY]

I got my serger 8 months ago and I always watched this video before and during rethreading. Today was the first time I threaded my serger all on my own! Thank you so much for creating this video, it's so easy to follow along and your explanation is so clear. You get 100% of the credit for teaching me how to thread my serger!!

[@tlsnana9539]

My machine was just delivered tonight. Of all the instruction videos I’ve watched, yours is the best. Thank you!

[@BlueprintDIY]

You are so welcome! Happy serging! 🪡

[@ShineMedia1]

Amazing video. I was petrified, you showed me the light. 🕯️ thank you so much for your excellent straight forward instructions 🙏❤

[@funeralprograms]

The BEST threading tutorial for the Brother 1034D. Thank you so much, almost got rid of mine until you showed me the error of my ways. Much thanks! Subscribed!

[@BlueprintDIY]

You are so welcome! Glad I could help!

[@Southern.Nappiness]

Very good video. I went to Wal-Mart to use the restroom, in the back bcuz the one in the front was being cleaned. I just happen to walk near the sewing dept. I checked out their sewing machines.They had a Brother 1034DX. I bought it immediately. The price was cheaper than online. I've used other people's serger in the past. I already have 2 Brother sewing machines, computrized and one Janome. Now, I have my own serger and it's so easy to thread. 😊

[@ckathleenmitchell9298]

I cannot THANK YOU enough for your wonderful videos! I’ve sewn all my life (dad was a tailor by trade), and always used an “overlock” stitch on my sewing machine that took forever to do. I watched your video on best beginner sergers and having a Brother machine already - decided on the 1024D and SO glad I did. Having this tutorial was amazing, and the fear of threading is gone. Now I’m ready to up my sewing game and it’s all THANKS to you!!!!!

[@maryrosenberg8095]

Thanks so much ! After like 3 failed attempts using the brother video, I was finally able to thread my new serger with your video !

[@laurawalls1373]

Also the same threading instructions for the Brother 1634D! I will be saving your video for each time I thread my machine! Quick, simple, clear and to the point!

[@laurensmith8530]

Thank you so so much for this easy to understand video! I had almost given up on using my serger. It has been collecting dust for a few years and your great instructions and close-up video helped me diagnose multiple issues with the threading and the working of my machine. ❤❤❤❤❤

[@Geellun]

OMG, you angel! I just got this serger and the most daunting part of it is threading and today the thread that came with it came out and I decided it was time ! I got it on my first try thanks to your helpful steps!

[@SRJ2832]

LOL, I've had this machine for about 3 years and the original thread was still in it. I probably used it for doll clothes back then. Now I have to alter some adult clothes. 🤣 Thank you for this straightforward tutorial.😊

[@BlueprintDIY]

You’re so welcome!

[@margolehman5482]

Thank you, Angelina! I am not a sewist. I have always gotten so frustrated even with the simplest sewing machines. But as a weaver, I learned I really should have a serger to finish off my hand-woven fabrics, so I picked up a used 1034D today (based in part on your recommendation) You made threading this SO EASY, I'm wondering why everyone says its' so hard.

[@judyseefeld2903]

Fun video but instructional. And no long winded, talking about yourself tutorial. Everything was concise, about threading the serger. I appreciate this as so many tutorials ramble on about the creator of the video. Thanks!!!

[@BlueprintDIY]

Thank you! ☺️

[@judyseefeld2903]

@@BlueprintDIY You are welcome. Finally got my serger threaded correctly. ♥

[@sheilahaire1325]

Hello angelina I am so great full to for your demonstration. Lord knows I have tried long and hard to do this , and you have made it so very simple and easy I don’t have to ask for help any more hallelujah thank you Jesus. 👏🏾👏🏾👏🏾

[@BlueprintDIY]

Yayyy, I’m so glad!

[@almasslots1043]

I just received my new surgery and you are my first video that popped up on how to set it up. It is very descriptive and very easy to understand thank you so much

[@BlueprintDIY]

Yayyy! I’m so glad it was helpful! Happy serging!

[@ginadalrymple5660]

Finally. A simple video that is easy to follow. My serger threaded perfectly, the first time, when I followed your video. Thank you!

[@TheEvie202]

Girl you did it again ! You are the absolute best wouldn’t have gone from white to black thread, on my serger , without you! Thanks 🙏 you are the best!❤ Muchas gracias !🙏

[@BlueprintDIY]

I'm so glad this helped! 🙌

[@t3ssarose684]

Thank you SO MUCH! I’ve watched so many videos, gave up, my friend told me to try again, I found this video and I got it!! Thank you.

[@BlueprintDIY]

Yayyy, I’m so glad!

[@raidwalcott8008]

Thank you. I'm dyslexic and I kept bringing my server back to the shop to under the six months warrant to re-thread. Thanks to you I'm doing it myself now. Thanks again.

[@BlueprintDIY]

Yayyy! 🙌🏾 I’m so glad!

[@immautubegal]

Thank you for making this video, two years later it’s still helpful!!

[@Silky4me]

I was having so much trouble with my serger..the first thing you said was set everything at four. It wasn’t until then I realized my grand boys had been dialing things up..lol. I threaded it and back to perfect stitching. Omg. A game changer. Thanks you so much

[@-abraxas-]

I bought my serger used and it didn't have the manual or DVD with it. I'd never owned, much less used, a serger before. I have sewn for several decades but had never allowed myself the luxury of having one of these complex looking critters. I was nervous about screwing things up. I found a few other videos and ended up kinda scratching the old noggin after watching them. Then a friend in my sewing group sent me the link to your video. Thank you sooooooo much for the help. I could not have gotten the job done without your instructions. You made it so easy to setup and understand. You are absolutely wonderful!

[@denisehelms5276]

I am so delighted to find your video. It has made threading my Brother so much easier! Thank you Thank you Thank you!!!

[@indigo80228]

Thank you so much for this video. I was having so much trouble threading and keeping the thread from breaking. You were super clear and precise. Thank you so much!

[@annesummers09]

Threading the lower looper is the hardest for me. Your little trick makes all the difference. Thanks.

[@BlueprintDIY]

Yayyy!

[@teresacurren1464]

Thank you! Every time I need to rethread my surgery I have to find a video and this is the first time I found yours. Thanks again. You are a great help.

[@BlueprintDIY]

Yayyy, I’m so glad!

[@lynmcgrath74]

OMG thank goodness I stumbled on this web site. I could NOT get my serger rethreaded but you one trip to thread the thread through the hole before pushing in the blue think did it for me!!! THANK YOU SO MUCH!!!! I will be watching the rest of your videos on how to's for the Brother Serger 1034d!!!!!!!!! The best video I've seen so far!!!

[@lynmcgrath74]

correction "your one tip" it was a great TRIP! Thanks again

[@barbaramahan1589]

Best tutorial on this I’ve found yet….thank you.

[@cathyfrazier286]

You are the first person that has explained this where I can understand it. Thank you!!

[@soniad.9411]

I just revisited my serger after about a year and it was so simple to thread - Thanks to You! God Bless!!! ❤

[@BlueprintDIY]

You are so welcome!

[@kellemontgomery5996]

Need to retread my serger tonight so back to you I come. Thanks for making this video!

[@대감-n2g]

I bought a used 1034D a few days ago. I saw this friendly video and succeeded perfectly. The video was so easy to tell that I was able to succeed at once. Now I'm making pajama pants for the first time. Thank you very much.

[@cynthiadavis4441]

I have watched a couple of threading video's this is by far the best one out of all of them. Thank you so much for posting. I hope to see more of your videos here, you rock lady.

[@lolawall3561]

I look at this video every time I am stumped. The steps are crucial! Thank you for suck a helpful video. Amazing!

[@BlueprintDIY]

So glad to help!

[@cet1069]

Wow, just catching this 4 years after you posted it but it is making having a serger so much less intimidating to me. (Haven’t gotten one yet but very interested in getting one.) Thank you so much for this video. Now I’m going to find your reviews of this Brother and the Singer sergers. Thank you! 🙏

[@sewkipp]

Oh my word THANK you for this wonderful tutorial! So easy to follow! My husband surprised me with this serger and I have been so scared of attempting to thread it. I watched this and followed along and BAM! First try! Thank you again so much! I feel like a million bucks conquering a fear like that!

[@BlueprintDIY]

That is SO awesome! You rock!

[@lauraleepascoe8254]

Your video makes threading the serger so simple. You give great instructions! I’m new at using a serger and your video is my go to video! Thanks so much!

[@BlueprintDIY]

I’m so glad it was helpful! 🙌🏾

[@Kathy-ph9yk]

Thanks! I watch your video every time I thread my serger. It is so well done. Cuts down on a lot of frustration for me!!!!

[@BlueprintDIY]

Thank you so much!! 🙏🏾

[@barbaraosborne5126]

I always come back to you when I need help with my serger. Thank you so much.😊

[@sabrinaposely4768]

This video tutorial for threading the Brother Serger is hands down the BEST one I’ve come across on YT. Thank you!👏🏽

[@mialemon6186]

I've only ever used a regular sewing machine, so this new thing I bought is a monster to me lol. This video is the top of the tops. I had to watch it literally four times with the instructions in hand and rethread the machine for an hour while inventing new words.... And THEN I GOT IT. Thank you so much for being straight forward and clear. 💛 The line of stitching down the edge of my test seam looks so good I could cry! If I had to sit through repeats of a life story about how grandma used to knit socks for the church choir and thats how the presenter got into sewing, while cursing this new serger and watching the upper threads break every time, I'd've gone completely crazy 🤣🤣🤣.

[@BlueprintDIY]

Yayyy, I’m so glad you got it working! 🙌🏾 Happy serging!

[@JustMeAndMyFabric]

Hi Angelina! I just got the Brother 1034D this week - my very first serger ever. This video is fantastic!! Threaded it first time today while watching this video and doing the steps you showed. Worked like a charm. THANK YOU!! 🙌🙌🙌🙌💕💕💕💕

[@BlueprintDIY]

Glad it was helpful! 😁

[@galebadowski2157]

I took your advice after a lot of research on which serger to purchase, I believe I made the best decision based on your reviews. Thank you.

[@saalihahummhyza2837]

I’ve had my serger for almost a year and your video is by far the easiest…I’ll keep you posted on how this goes

[@BlueprintDIY]

Yayyy

[@jacquelinejones1574]

Had my serger for about 3 years and when the box came i was what did i get myself into. Stop sewing for a while. I moved and now i have a great sewing room and i dusted of both this and my sewing machine. But now im trying to refresh with sewing machine but remember i never used the serger. OMG. But i didn't panic cause i found this video and and you made it less intimidating. Manuals drive me crazy. Video is definitely a help. Thank you😊

[@BlueprintDIY]

You’re so welcome!!

[@lisajadwin1866]

I have been dreading using my serger until I found this video. I had made so many attempts to thread it and had failed! You have restored my faith in my machine and brought me back to sewing after more than a year! Thank you sister!

[@BlueprintDIY]

You are so welcome! Glad I could help you get back to sewing! 🙌🏾

[@bhigs09]

This just saved my sanity this morning! Completely forgot about the order 😂 saving this video for every time i forget 😅

[@sharperone8237]

Thank you... finally pulled it put again, sat down and didn't want to all the way to the basement to find the manual. Which I dreaded because I always miss a step, your video made clear and easy. Now I'm gonna checkout what else you know 😁

[@stephaniegenova5469]

This is the perfect example of how to thread this machine. Thank you!

[@BlueprintDIY]

Thank you 💕

[@rebekahdodson4979]

I have been fighting this battle for YEARS with one of my threads always breaking halfway through sewing. I tried different threads, watched so many videos, read the manual over and over, messaged my aunt who is a master seamstress but your video was so detailed and yet to the point I finally figured out the one tiny little thing I was doing wrong. Thank you, a million times over. ❤

[@BlueprintDIY]

Oh my gosh, I’m so happy to help!

[@coolforge]

I agree with so many others here who have said your tutorials are EXCELLENT. You explain things so clearly and directly -- you're my favorite source for serger info now. No pressure! Thank you so so much for your brilliant help. 🤗

[@BlueprintDIY]

Thank you so much! 🥰

[@1sylgen1]

So glad you showed how to do thread this serger. I use it every time I have to rethread my serger. Thank you... 😘

[@BlueprintDIY]

Yayyy!!

[@christymues2228]

Thank you so much! I’ve had this machine for about 10 years but haven’t used it in a loooooong time, I followed your instructions and it works perfectly the first go! You are the best

[@patsyvanroost6916]

Thank you so much, you saved my life! I watched another video 3 times but couldn't figure it out. I wasn't putting the threads at the back. Thank you for showing each step so clearly!!!!!!! Got it the firt time with your video, you rock!!!!!!!!

[@blankspace291]

Have you had any problems with this machine

[@kathydoyle4731]

It's one yr later after buying this serger. Your youtube sealed the deal on what I want and I'm beginning to feel more confident. Finally threaded it for the first time today after all pre-threads ended. Bit the bullet and this video was simple and easy! Thanks so much for posting! Nice job! (uh...me too ;-)

[@BlueprintDIY]

Yayyy! 👏🏾👏🏾👏🏾

[@corrinahubbard753]

I'm not one to usually leave a comment, but I had this sewing machine for almost 4 years and couldn't figure out how to get it to work. Within 10 minutes, it was running. Thank you so much!

[@BlueprintDIY]

Yesss! 🙌🏾

[@ccott7876]

I've had this serger for years; got it back from the repair and it's been sitting for years AGAIN! Thanks for this clear, concise set of instructions. I'm heading off to tackle the beast right now!

[@carolinamedrano2355]

I stopped using my serger for a few months!!! And I totally forgot how to thread it 🤦🏻‍♀️ you just safe me from stressing out about it. Thank you so much 💓

[@grandmalovesmebest]

I have this serger. I had an old one for @ 35 years until I couldn't get blades to fit it anymore. I just wanted to make a suggestion. If the machine doesn't make loops after threading, it is nearly always bc the lower Looper thread is over or under the upper Looper thread at the final threading step. The manual mentions but does not make it clear exactly where the threads cross. The threads won't sort themselves out or slide around the hardware of the little fingers that have the holes that the threads go through. This is simply crucial though threading instructions never mention where the threads go exactly after they go through the holes. It is easy to get them in the wrong place as we use the hand wheel to move the hardware to see where the holes are in the fingers. Clear closeups of the final areas help as do magnifier or clear diagrams. I've also noticed nobody mentions the position of the lever that raises and lowers the cutter. The diagram on the machine isn't clear (should say up/down or as you said engage/disengage). This serger really doesn't require an engineer or mechanic, but it could have better instructions and diagrams bc that is the reason ppl are intimidated by sergers. Especially, when it gets to the end of the threading, it leaves us hanging, though this is usually the cause of the lack of loops, snapped threads, and broken needles. Thank you for your video.

[@ashleybahr3776]

I come back to this guide every time I have to thread my serger! You're right, it is pretty easy, but I still need a reminder so I'm sure I don't screw it up. Thank you for this video!

[@BlueprintDIY]

You’re so welcome! I’m so glad to help.

[@cjjdjcfdrci]

Lol I have to say that this video has come in handy to me so many times! I don’t see too often and so when I do Usually use my server. And for some odd reason I have to always retire as it. Needless to say I look at it and then say shoot!! I need a refresher and your video is the best in teaching me … trust me I’ve used other !! Thanks so very much!

[@dollmm23]

This is the best tutorial ever (for me) on how to thread this Brother serger. Thank you sooo much.

[@BlueprintDIY]

Yayyy, I’m so glad!

[@rhamnerdixon2974]

Thank you so much for your clear and precise instruction. I am experienced in sewing but I have always been so intimated when it comes threading my sergers. I recently purchased the Brothers serger you are demonstrating and you have no idea how much you have helped me.

[@BlueprintDIY]

I’m so glad! 🥰

[@Cocoz311]

Thank you!!! I was able to breeze through threading with your thorough instructions 💕💕

[@renaissanceman8424]

I just got this machine as my very first serger. User manuals give me anxiety because all the words just jumble together, but your video made threading so quick and easy. I was smiling a mile wide when I did my test sew and it came out perfect on the first run. Thank you!

[@BlueprintDIY]

Yayyy, glad to help!

[@FrustratedTeacher]

THANK YOU! I'm shopping for an easy-to-thread serger and you just gave me the info I needed.

[@lychordia]

Thank you. This was a fantastic tutorial. I really found it helpful. I was able to follow along and thread my first serger ever. I have this video saved. I will use it every time!

[@dinah111myte]

Oh this was the easiest tutorial to follow. To the point and clear, even though I do not have my manual nearby. 😅 thank you ❤

[@aablue100]

THIS WAS PERFECT!! Thanks so much. I used to make instructional videos for school staff. You nailed it! So Good!

[@BlueprintDIY]

Thanks so much!!

[@zorrinabauman1148]

Love ya gurl!!! Hadn’t used my machine in years.. lost over 100# and altering my shirts. You are soo easy to follow!, gotcha bookmarked for future.. looking forward to all your videos.. thanks sooo berry berry much❤

[@sylviakleppinger5345]

I purchased this machine used. I was so excited but it has been sitting for 6 months…..I was reluctant to thread it!!!! I followed along with the video, stopping and rewinding to make sure I was doing it correctly. Done! Ready to give it a whirl.

[@jaimer9869]

This was so helpful, thank you so much!! I've been staring at my machine for months trying to work up the courage to thread the dang thing and today I finally did it!

[@cjjdjcfdrci]

I have had my serger for years and I hadn’t used it in about two due to illnesses. So, I had to look up how to thread my lovely little gal. Your video was the first to pop up and I’m so happy it did. You have the easiest best instructions I have seen yet! I have had to look up instructions in the past and I always had trouble following the videos. Yours was the easiest to follow with really good camera angles! I do so appreciate it !! God bless!

[@sharonarmstrong-fulton2663]

Wow. I received my serger as a gift two YEARS ago and, like others have posted here, I've been too intimidated to use it. Now I'm forcing myself to get out of my comfort zone and learn to use it because I'm taking a couple of fashion classes and ultimately I'll have to use industrial overlock machines. Your video is fantastic and helped me get threaded in no time. Thank you!

[@cathedralgrove4094]

My wife can no longer use this serger due to her neuro-muscular condition. I found your video right away, picking it over a couple others as it was shortest in length. I hit gold! with my choice. Thanks so much. I got it right the first time. I broke one of the threads (somehow) and couldn't find the instruction book. I finished the sewing job AND made my wife happy. "When mama's happy, everyone's happy". 😊

[@lindaryan4148]

Oh my goodness; I’m so excited!!! I haven’t been able to thread my serger until this video! Thank you so very much!!

[@BlueprintDIY]

Yayyy! I'm so glad!! 😁

[@maryanntooze9600]

I have had my Brother 1034D for about 6 years. Absolutely love it! This morning for whatever reason the thread broke. Ugh! Nothing like being ready to serge and the thread breaks! I decided not to fight it and research for a tutorial. OMGoodness! Thank you so much! So easy! I was back on track in no time! Thank you so much!

[@cherryschiestel7203]

Thank you! Thank you! Thank you! I was about to throw this machine away. Now I’m loving it.

[@BlueprintDIY]

I’m so glad I could help!

[@ashleenull5192]

Received this serger for christmas. Watched your video like 8 times. Finally got the courage to set it up in April. THANK YOU!

[@Michael-fi4me]

Thank you so much my serger has been sitting in my closet because I could not figure out how to thread it. Then I saw your video and I'm able to use it now. Thank you so much

[@suite2sweet]

Thank you so much for making this video. I received this serger as a birhtday gift was so afraid to use it. Your lesson was very easy to follow, again thank you.

[@BlueprintDIY]

You are so welcome!

[@denisedayton8374]

Best serger tutorial on the Internet! Thank you!

[@BlueprintDIY]

Thank you 💕

[@cathywright8508]

Yours is the best tutorial on threading the brother 1034d very easy to follow instructions 😊😊😊😊

[@BlueprintDIY]

Thank you so much 😀

[@nanakate6586]

Just got my serger out after 20 years! Thus video was such a helpful tool. Threaded it on my first try! Thank you!!

[@BlueprintDIY]

Yayyy, congrats!!

[@kellyrussell530]

Praise the Lord Almighty. I’ve been fighting with the lower looper for a few hours. I finally got a good magnifying glass and watched your excellent video. Ty

[@patriot5548]

Your instructions were great, clear, good camera work. Thank you for your help. I am doing a rolled hem and trying to get all the tensions right, but now at least I am not terrorized by my machine like I was with my Paff.

[@BlueprintDIY]

Thank you 💕 Glad to help!

[@septemberknits4894]

THANK YOU SO MUCH!! Because of you and this video I finally faced my fear and threaded my serger! It worked too. THANK YOU THANK YOU!!

[@camillemiele1633]

Thank you so much for this video. Your camera is so clear I can see even those little nooks and crannies and it's quick and to the point.... I have to refer to it every time so I definitely have it saved 🙌🙌❤️❤️

[@BlueprintDIY]

Yayyy, so glad it was helpful! 🙌🏾