EASY Van Window Installation - MOTION WINDOWS

Step-by-step window installation - Ram ProMaster. I share my mistakes along with tips & tricks to make your installation quick and easy.
Where I got my windows:
www.motionwindows.com/
What I used:
Jigsaw - amzn.to/2AuW2f9
Metal Jigsaw Blade - amzn.to/2XRILWM
Clean Metal Primer - amzn.to/2AijXOX
Painters Tape - amzn.to/3cXIAxs
Metal File - amzn.to/3fgJA1o
The hardware and the foam seal all comes with the Motion Window order!
If you wish to support our channel & help us continue making videos to inspire others, visit our Patreon here!
/ linneaandakela
.
.
.
We are Linnea and Akela. In May, 2020 I purchased our 2016 Ram ProMaster, Togo, to become our full-time home. With this van build, I am using my stubbornness and drive to show individuals that they, too, can convert a campervan BY THEMSELVES and ON A BUDGET, with a lot of learning, rolling up the sleeves, and getting to work.
Our goal is to inspire individuals to chase their dreams... to break from societal limitations and live the life they truly desire. And, to GET OUTSIDE!
SUBSCRIBE for van build details, wanderlust travel, and the truth about van life with a big german shepherd!
Follow on Instagram: @linnea.and.akela

[@johngrant1337]

I have installed 75 to 100 windows in van in the last 50 years and you did the Best job of installing windows that I have seen for a first timer ! Great Job !!

[@Linneaandakela]

John Grant wow thank you so much!! It is great to hear that from someone with so much experience!

[@punxnotdead3873]

Hi John, Is it needed to put wood around van panel to help support the flimsy shell or not needed? Thanks. Looks good

[@malachiaxl3178]

instablaster...

[@robertlutz2244]

I concur, John ! Great job, Linnea !

[@glenstamate7990]

Hi John do you have any installation videos?

[@LakeTahoeCustomCampers]

Great video, I’m building out my third build and windows still scare me. A good trick before you drill the holes on the edge of the template is to drill two in the center of the template and the through the van. Bring the template outside (or inside if you start on the outside) line up the holes and make sure the placement works. If it’s off or interferes with any of the structure you can still adjust it. Building vans is as much fun as using them. Great work!

[@barrytimm5497]

For a level, you can get a digital level which you then set on the floor as a reference level and "reset" the digital level to that surface, so that all other measurements are relative to that surface. This means your van can be parked on an unlevel surface and you can still use the level for all your measurements.

[@Martin-xr1mo]

Great job 👍🏼 ! I would highly recommend Safety Glasses when drilling as well .

[@Linneaandakela]

Yes, I have gotten much better at remembering those! Thanks!

[@Mylilcasita]

Super proud of you for documenting this and accomplishing something like this!

[@Breakable_Pencil]

I’m rewatching this series and it so cool to see how far you’ve come in such a short amount of time

[@Q2bFF]

You did an awesome job loving the build. Your nervousness only accounts for how important this is to you.

[@chris.kee.]

Hi Linnea. This video has been so helpful. I'm stoked to say I wrapped up my motion window install this week. Huge thanks for vlogging this. I'm glad I found your channel

[@TheFacilitiesOfficer]

Great video, me and my daughter plan on converting a van, love your breakdown of the work, my daughter loves your beekeeping 👕 thank you for the ideas wish UK weather was as nice...

[@JW-kv5ie]

Great job explaining how to install motion windows! Sure did help - we installed 2 today. Keep on creating great how to videos!!!

[@cathietonkin5577]

You are absolutely astounding.... you make me think even I could do the Windows.... and I’m a senior citizen! Your enthusiasm is inspiring!!!!

[@nancysc]

I’m super excited that I found your channel and really enjoying watching your journey. Great job keeping it simple and being real. Traveling in a 20’ trailer for now but thinking my husband and I could design and build our own van hopefully in the near future. I’m starting with your first video and working my way up to present day. So tempted to take a peek at your completed van, but I will resist….right???

[@delaneymiklos6817]

I just purchased a promaster and plan on adding similar windows to it. I have not tried installing yet but this video was SUPER helpful to understand the step-by-step process! Also, I really appreciate all the little tips you added in. Thanks for taking the time to film your install!

[@rogerdeaver9038]

I am impressed, Great job. You covered all of the bases.

[@CrystalBowersoxMusic]

I've been nervous about installing a couple windows in my Promaster. I've searched for a video that was to the point and I just want to say thank you for this! I'm feeling far more confident now.

[@sanders4671]

Please keep making videos! Your doing awesome!

[@johnbroystonjr23]

Hey Linnea & Akela!!! Way to go avoiding the puckering. Those windows are a nice added touch. My van doesn't have any windows either so I'm thinking about copying what you have done. You are turning into a Professional right before our eyes. Keep up the good work and Thank you so much for sharing. 😎

[@beew290]

You go girl. I am getting my van soon. Can't wait to start. You did a great job.

[@Linneaandakela]

Congrats! Have a wonderful time with your build :)

[@marilyn3605]

I just found you on KZbin and I am watching video from the beginning! 🥰🥰

[@sheilamcwhorter2961]

Omg! I could only Imagine how stressful that can be. I was stressing with you! Bravo kiddo! You made it look easy to do. As a fellow female doing a van build, you have totally boosted my confidence! Thank you so much for this video! Phew!

[@sydneykenyon9728]

Can’t wait to see how you frame out those windows!!

[@Linneaandakela]

Me too! Haha

[@emgee4075]

Great job! Thank you for a video that makes me wonder if I should consider doing my own van build (as I am in the research phase, deciding the best option for me - van, pull-behind, etc). And, you *should* be VERY proud of yourself - that is the best feeling in the world, to realize how very capable you are! 👏 👏👏

[@beew290]

Watching your videos, I feel like I am in class. I am a mom, and grandma. I cannot wait to get my van and start my build.

[@NoCaping]

You are awesome I just found your channel and I'm currently binging your series Congrats!!! Love how you break everything down as you go along

[@lisajin6243]

could you tell me your address where to buy the window

[@machambers00]

All I keep thinking is “what a badass!” Great job! 👍🏾

[@AlexRaymond2023]

You gave me the confidence to do it! ty! measure twice cut once 🙂

[@zajournals]

Very thorough explanations. Well done. 👍🙂

[@robertallen6028]

i'm looking at building a van just for camping. i don't plan on living in mine but windows like this would be nice. i've watched a few installs but the way you did it makes the most sense.

[@Linneaandakela]

Thank you! And that makes sense, the amount of air flow they create is amazing, even if it is a camping vehicle

[@cathywillson669]

Great videos! Can't wait to follow in your footsteps!

[@NegretesPainting]

You do a awesome work with your van

[@libertybell144]

Hi Linnea. I found our channel recently as I was getting ready to install my Maxxair fan. It has quickly become my favorite van build channel. It is helpful to see another female doing this on her own with no prior experience. Your videos are inspiring me to each next step. Next step for me is to install my windows, so came back to watch this a 2nd time!

[@randiolson3024]

I second this! Starting mine this summer, GL with yours! ^-^

[@hooleygooley8892]

Amazing job! Enjoying the videos.

[@Shihtzu99]

You are an inspiration!! ❤

[@sydneykenyon9728]

Great job! Loving the videos and can't wait to follow.

[@Linneaandakela]

Thank you! I appreciate it a lot :)

[@omavic9560]

You got me thinking I can do it too! I wonder, how does one replace a stationary window? ~you’ve inspired me to find out! Thanks!

[@phenix4-447]

your work skills are impressive :)

[@pineapplekid9219]

I really love your videos . Big help . Thanks

[@hallomilet]

For more light id prefer a sun roof Love your work

[@Linneaandakela]

That is such a great idea! Unfortunately, my fans and two solar panels will be taking up almost all of my roof space - so that wasn’t an option for me and my small van haha but maybe in the future if I build out something bigger I will go that route!!

[@hallomilet]

@@Linneaandakela i like the fact that you replied most people do not

[@myopinion8610]

Thank you for this video. You made something that I thought would be scary and difficult rather easy.

[@QueenBaha]

🌸💗I think I need to buy a superwoman cape I my future van doesn’t have windows, this was brilliant💗🌸

[@64MAGA24]

I bought exact windows n love. Didn’t do best job making hoke but thank god it worked no leaks. My sliding door window is terrible…opening is just terrible and I will replace it some time n future.

[@ryanfarley4463]

Another great video!!!

[@martykong3592]

Wow! Great job and thanks much for sharing! Appreciate the how to.... most of us aren;t that handy, or brave... Take care :)

[@jhrhiggi]

You really are very inspiring!

[@daniellemrakovcic7297]

You are such an upbeat and inspiring individual. I am pulling for you and I’m your biggest fan ! Not the one on the roof of your van, lol. Please Please Please keep posting the videos. Bo

[@Linneaandakela]

Wow, thank you!

[@daniellemrakovcic7297]

Linnea & Akela just one thing, watching you work on your knees were killing my knees. Have you ever thought of wearing cushioned or even gel knee pads ? I work in tight spaces on planes and those knee pads save my knees from a lot of pain. Bo

[@luisdelmar9635]

Hey Linnea! Thank you for uploading this video, I used it yesterday to install this same window in my van. I am currently converting my Promaster too. By the way, after installing the Maxxair, fan, I was pretty confident coming into this window install until I heard you say that this install was more dangerous, haha. Looking forward to seeing how your van turns out.

[@Linneaandakela]

So glad this was helpful! I am also glad you were able to avoid some of my silly mistakes. Good luck with your build!

[@heknut510]

Amazing job GZ if I could recommend investing in a DeWalt Impact driver. It gave me chills to see you use a drill gun for screws lol but I’m just a nerd like that :) great job, please drop by anytime and give me a hand with our Promaster city back windows

[@sarahloy830]

I saw you start with that old jigsaw and I thought, oh good, my old jigsaw will be fine, 2 seconds later, lol. I know what my next tool will be 😁

[@quintonsoule1061]

Great job well done

[@creaturefeaturepetsittingl3579]

So impressive!!!

[@alexdoerofthings]

Great videos. Thanks!

[@ecmmechaicsuk9535]

God bless you looks great 👍

[@susanbankowski2687]

I'm getting ready to install my windows and I love your videos! Is there a reason why you didn't cut from the inside of the van to avoid making two outlines? Thanks and keep ip the great work!

[@lokis7230]

Another tip is to put tape over the slide door rail. To avoid small pieces of metal behind the rail. Before I started the conversion of my Peugeot Boxer (same as Promaster only different name) I removed that rail and there was some rust. Easier to fix before you build the inside because the nuts for the rail is inside the van.

[@wendistraight6425]

Hi! I already gushed over you after watching a different video of yours but, because it bears repeating, you are a rock star! Because I am (hopefully) very close now to having my own Promaster to convert, I am re-watching a number of your videos. One thing about this one that I can't for the life of me figure out (and it has nothing to do with windows) ---- Why is your friend in the background (I assume 'friend' because 'random stranger' would be even more perplexing) tying a weight to a pole (at about the 11 minute mark)?

[@Linneaandakela]

Thank you so much! I really appreciate it! Haha - so on that day it was super hot and I put up my EZ Up tent to block the sun... but then a crazy windstorm came through and I needed to get my window in quick because there was a giant hole cut into the side of my van. So Jake and I were scrambling to get something to weight the tent down, while I was scrambling to get my video recorded and my window in! It was quite the chaotic moment haha

[@ag4zf]

You did an awesome job!

[@Linneaandakela]

Thank you so much!

[@AdventureOtaku]

I did my vent fan with a cheap jigsaw, and went through like 5 blades. For my sliding door window I bout a $100 jigsaw (a bosch) and it was so much easier.

[@michaelrs8010]

My van is going to be as "stealthy" as my idiosyncrasies allow. And one of those is that I can not be in a van that does not have side back windows. The style of windows you put in are the type I'm going for, but probably a little smaller. One is definitely going to be a bit more forward, above some part of what will be the sink or food prep area. Since I plan to go a little smaller, I would probably be fitting one about where you fit yours, only next to that ribs so I didn't have to cut it out. Or maybe one on either side of the rib. I'll just have to see my options closer to the time.

[@petra6099]

Great!

[@garnettehackney1563]

enjoy the show /you are the damn best window insallationer

[@Linneaandakela]

Thank you!

[@joybickerstaff194]

Hello Linnea/Akela!! Big question, most van dwellers have one fan, why did u choose two??? I thought on 2 myself, but was not sure of room for solar. I watched a few of ur other installations b 4 seeing this one. I’m saving them to help me out when I build my van. I know that u feared and stressed on doing these things, but I have to admit, from my side of the camera, once u started each project, u looked like a pro, as if u’d done it along time. I appreciate u for sharing and explaining the process!!! Thank u

[@sandylee1717]

Wow - you made it look easy!! Great tutorial video. Thx, Now I will try mine.

[@Linneaandakela]

Thank you! Good luck, I hope it goes well!

[@davidgronek8931]

Good job and I like your measured fear as you drill holes in your van. I bought the exact same windows as you for a transit. Did you test them for leaks with a hose when done?

[@Linneaandakela]

No I didn't! But I have been in a lot of rain so far and they have been great :)

[@elizabethsmith6406]

Hi Linnea! I’ve been following your page for a while. Thank you so much for all of your videos. Can I ask you- did you use any support after you removed the bar to cut for your windows? I removed the bars and there is a lot of swoosh when I drive. And man I’m scared to start cutting the windows ans installing and I’m wondering if you need to add support after to prevent the panels from flapping (swoosh sound). Thank you so much!

[@keekcxm7458]

Nice vids I’m subbing

[@Linneaandakela]

Thank you!

[@v.n.4276]

Hi - Great video, very clear. I brought an RV window on Amazon that didn't come with instructions (as per the listing). I was wondering is that tape you use foam or was it butyl tape?

[@westernvan_no4435]

Nice video! Good job and well explained👍

[@Linneaandakela]

Glad you liked it!

[@olepickle5366]

Hello there you really did a great neat job for your van windows, i wanna ask you how are your windows going since you have them installed? In planning to install my windows this winter to help getting rid of moist and smell while im cooking. TIA

[@josegonzalez-di7rf]

good job girl

[@Linneaandakela]

thank you :)

[@patrickjobling8676]

Gotta tellya mzz pilgrims ..your talents have no limits .. nearly as good as ya draws ..fantastic..😍😎😁pip pips

[@ericbarnett6771]

3M Tape Division approves of this video.

[@MikeRyan77]

You are a badass!!

[@kirstenmc68]

Woohoooohhh!

[@Filthy_Rich_556]

6:26 bless you...

[@Breanna7]

❤❤❤❤

[@javiersalas8758]

Great info!

[@chrisdavies-kiwi]

Hi there - great video. Is there any reason why you can't cut the hole from the inside?

[@abbeyjane1306]

On hers the jigsaw would hit the door top, otherwise, it doesn't matter.

[@msterrim81]

After having the motion windows in for sometime now. Would you recommend? Did you have to send in measurements for windows or you bought the recommended ones?

[@SsDiBoi]

Nice shorts

[@matthewcollier5763]

Hi!! Thanks for the great video. Did you have a gap on the clamp ring where it is split? I still have an inch or so gap on my clamp ring when I put it on my window...

[@Linneaandakela]

No I didn't! I'm not sure why that would have happened. Did you end up figuring it out?

[@matthewcollier5763]

@@Linneaandakela yep! User error :)

[@ibsjsm5]

I suggest that you put the supports you removed back on the walls. You may have to trim them but they are necessary.

[@Linneaandakela]

There will be framing on the walls!

[@leigh3408]

Hi Linnea! You're over a year down the road, do you still like the window set up/ brand you went with? I am starting my van build and I feel overwhelmed with the number of window choices! Thanks!

[@Linneaandakela]

Yes! I truly love my windows. Although, Akela has decided to remodel a bit and busted out both screens. So other than that, I still love them!

[@9012505]

Does anyone know about warranties? Does cutting the hole and installing the windows yourself invalidate the warranty? Would it be wise to have an authorized dealer install them on a van that is under warranty?

[@usedcomputersdotorg]

Does anyone know if my 2005 Econoline Van windows can be reused in a Transit Cargo Van. I'm talking about the two windows on the drivers side. The one right behind the driver the opens from the bottom and the longer fixed closed window on the drivers side also the long side window on the passenger side.

[@glenstamate7990]

Just curious why you layed it out on the inside first.

[@MLA..]

Don't the back side widows have screens to keep bug's out?

[@bunkp6274]

Bloody hell you would think you were British with how much you talk about the weather 😂🇬🇧

[@Linneaandakela]

😂😂😂 maybe thats just where I belong!!

[@bunkp6274]

@@Linneaandakela Yay! Come and drink tea with me!

[@Linneaandakela]

I’d love to!!

[@Martin-xr1mo]

You said your windows are from Peninsula glass is that the same as motion Windows? Thanks 😊

[@Linneaandakela]

Yes! Peninsula Glass in the company. Here is their website! www.motionwindows.com/

[@skippylearn]

Hey there Trooper!!! How goes it with the windows, are you satisfied with your purchase? I'm looking for windows for my box truck. Would you recommend!?

[@Linneaandakela]

Hey! I have really loved the windows. No leaking or issues with the locks/sliding mechanisms. I highly recommend! I do know that there are other options for windows that you basically glue on... and they might be a bit cheaper. I have heard that people like them but I have no experience with that kind :)

[@skippylearn]

@@Linneaandakela thanks and when will we get a full tour of your build...did i miss it? I noticed u didn't use any butyl tape...

[@skippylearn]

And I really need to say...that I've watched many vids on van builds. But you've kept things so smooth and easy. Thanks so much!!

[@Breakable_Pencil]

I know it’s a weird question but where do you buy the blue masking tape? Whenever I buy it it’s always super weak

[@Linneaandakela]

I just got mine from Home Depot! It is painters tape

[@paealeemacdonald613]

Hi what are the measurements for motion windows

[@glenstamate7990]

What size are your windows?

[@user-fx8xf3us8x]

What size window did you order?

[@commonsense246]

You didn't do headers and footers for these windows? They will bend in and out with the metal! Aye Yai Yai!

[@loythomas16]

Any silicon or glue needed!

[@georgelynn2413]

Had a lady friend tell me years ago that she didn't need a wiener to hang curtain rods. Nice job.

[@jcardosa02]

how can u total a van because u have windows ?

[@Forrestbigwoop]

Stock Promaster high top is 40k minimum now, guess ill go for financed under carvana? My grandfather has all the tools for renovations but he rents and HOV trailer park so not sure if Id be able to build it there.. otherwise im living in my car rn and I prob have more money saved then most my family..4k lol things are ridicules' van life trending 40k debt and 10k renovation over a year is whats ahead if I can even. #Linea&Akela

[@Linneaandakela]

Wow… times have really changed. I got my van for 17k. I really wish you the best with your van and renovations! Maybe things will shift here in the next year or so?

[@Forrestbigwoop]

@@Linneaandakela tbh I fear it is going to get worse. Is sooooo many van lifers out here but I appreciate your video playlist of the full build. Makes it look possible to have a dream🙂

[@rextheforgoten1]

make a playlist in order

[@Linneaandakela]

Ooo that’s a great idea. In order of the build?

[@rextheforgoten1]

@@Linneaandakela would love it

[@vanman5593]

it's hard to keep my eyes on the window ❤