Easy VAT Cleaning Method Using Supports - Resin 3D Printing!

This is a How-To video on an easy method to quickly clean your VAT/Tank after a failed print, using supports.
Please like and Subscribe!
Stay tuned for my next project!
Tools I use
HARDELL mini Dremel Sander: amzn.to/3TwQPId
Silicone Slap Mat: amzn.to/3ISfDWf
Nitrile Gloves: amzn.to/3IUwEPq
UV Flaslight: amzn.to/3VzDemb
Tear Away Paper Towels: amzn.to/3VzGT35
Sanding Pads: amzn.to/43CatqN
Gorilla Super Glue Gel: amzn.to/3vpSeZ9
ANYCUBIC Wash & Cure Plus: amzn.to/3TxtUN2
ANYCUBIC Photon Mono M5s: amzn.to/3W1kiN5
Black Cutting Mat: https: amzn.to/49l1jAs
ANYCUBIC Standard Resin: amzn.to/3PCBcOe
Aves 2 Part Apoxie Sculpt: amzn.to/3vXZJqf
12x16 Plastic Tray: amzn.to/3V6VmmJ
Some of the links provided are affiliate links.
#3dprinting #resinprinting #resin3dprinting #vatclean

[@ResinForge]

Hello and thank you for stopping by! If you enjoy the video please consider giving it a like I would truly appreciate it!

[@Squatle]

That's... genius

[@ResinForge]

It makes cleaning the tank a breeze without having to remove the resin. Thanks for the comment, I really appreciate it

[@samael.projects]

Another tool to find debree from vat is to 3D print "Resin Scoop" either with FDM or resin. Its better than silicon spatula

[@ResinForge]

I’ll check it out! I more use the spatula to feel around in the VAT, not for any kind of removal. Thanks for the comment, I appreciate it

[@NoMercyFtw]

Resin is expensive and I find myself not even using this method because it's a waste if I know there's debris in my tank I would just rather strain it, having an extra build plate is also a good idea so you can strain and then still get back to work......

[@ResinForge]

This method saves me a lot of time when I need to quickly clean the tank. I mainly print very large models (1/4 and 1/6 scale) So the small amount of resin wasted is not a big deal to me. Everyone’s methods and printing needs are a little bit different so I always say, do whatever works best for you to make the process easier😊 Thanks for the comment

[@NoMercyFtw]

@@ResinForge oh no I get it saves time that's why I have a spare vat