Eaton M90 GM Supercharger for Cheap at Pic-A-Part

[@SmokeyRam]

I've been obsessed with building a boosted 4.7, every since i picked up a complete one for cheap. my first thought was one of these blowers or one from a supercoupe tbird or XR7. But I may go single turbo. Not many boosted 4.7s out there, seems like once people build one they just disappear from the internet lol loved the supercharger removal montage, I hope to see it mounted to a 4.7!

[@richardwisser4728]

Keep us updated if you do!

[@Supercharged287SOHC]

Please subscribe to my channel I’m building a supercharged 4.7

[@DANEMSPRINGER]

Awesome Martin! Can't wait to see what you have planned for those!

[@martinbuilt]

You and me both!

[@TheInsaneShecklador]

3:30 Gotta agree. I've never seen a yard even half that clean before.

[@martinbuilt]

Yeah this particular pic-a-part really does a great job of keeping things picked up and looking great.

[@lukeellsworth1377]

I'm hoping this means there's a supercharger install on that Jeep coming soon that's been the only thing stopping me from doing it and I'm lazy 😁

[@martinbuilt]

I would like to use the Ford Mustang Cobra supercharger on the 4.7 engine.

[@timland7553]

@@martinbuilt do it! Please!

[@funfun5656]

@@martinbuilt If this is good enough for the 4.7 ford would it also work for the 4.7 Magnum from chrysler?

[@natewj1077]

You can get quite a few GM/Eaton superchargers out of various models with the 3.8 V6, such as: - (90's & 2000's) Pontiac Bonneville SSEI's - Pontiac Grand Prix GTP's - (Early 2000's) Chevy Impala SS's - (Early 2000's) Chevy Monte Carlo SS's - (90's & Early 2000's) Buick Park Avenue Ultra's - (90's & Early 2000's) Buick Regal GS's And Buick Regal GSX's < really hard to find - (90's) Buick Riviera's - (90's) Oldsmobile Eight-Eight LSS's - (90's) Oldsmobile Ninety-Eight Elite's I'm sure there's more I'm forgetting, but these are the ones that might still be on the road around you... keep an eye out, there's very subtle details they changed to let you know that there's something "special" under the hood... you never know what grandma could be driving...

[@djdale.5806]

Also the Australian Holden Commodore from 89-2003.

[@omartorres5688]

I am surprised they were never in the Pontiac Firebirds in those years

[@Reaper3179114]

Jist picked on of these up out of an 04 buick park avenue. 55 bucks out the door, and my first though was 'if it doesnt go on my impala. Its going on my WJ' cant wait to see the retrofit for this on the 4.7L

[@tonyb2086]

Cool show! I want one for my XJ, it would be good to see you do an install on a 4.0 Jeep. 👍

[@dinohristopoulos9133]

Or a 2.5L Jeep Wrangler..

[@danhambrick6331]

Nice Martin...I sure would love to see a supercharged Dakota 😁😁💪👍👍

[@martinbuilt]

Thank you, Dan. Yeah, that would be a lot of fun.😎👍

[@Dodgeramsam789]

Very cool! Boosted technologies makes an M90 kit for the 4.7, I think they use Gen III's by default but you might be able to get a gen V kit made ive also heard of them doing an m112 kit for a 4.0. From what I understand they use a 9th injector with a FTC to cool the charge Temps since the M90's are non-intercooled. The m90 seems like it can add quite a bit of power to a 4.7 but are limited compared to a larger blower.

[@Dodgeramsam789]

@Larry thats awesome! You'll have to post some videos when you get it, I would like to see it

[@Dodgeramsam789]

@Larry sounds like it will be a fun build, I've heard from talking to others that 8-10psi is the sweetspot and the head bolts start to stretch around 12, I've been wanting to boost mine so I went ahead and got some ARP head studs and ported the heads while I was at it. I've been running stock rockers with 212 cams and Comp cams valvesprings, and stock lifters for years and haven't had any issue. However I did replace all the valve train when I did the heads.

[@Dodgeramsam789]

@Larry I picked up the cams second hand on Ebay in 2018, they were originally HO's but were reground by Crane Cams. I think regrinds are the only way to go nowadays. I've thought about a rear mount setup but im running a true dual exhaust system plus I prefer the supercharger whine to the turbo whistle.

[@Squidwardooo]

Let’s hope this means he will supercharge a 4.7. I’ve been wanting to supercharge my low mileage 4.7

[@lukeellsworth1377]

Okay fine I'll go pull one you've convinced me

[@JohnSmith-ot9sc]

Nice martin that's a good find for sure 👍🏽

[@arnoldwerli9370]

Hi Martin, where the another Vids about the blowers?

[@petrikeppo]

Man, Jealous of your yards down in the U.S. I'm in Ontario Canada and I just pulled a SC off a 97 Buick Riviera (It was the only car in the yard of about 1000+ cars that had one). I paid $211 Canadian$ and it will have to be rebuilt. That Gen 5 you have is SUPER rare here, but you should have pulled the lower intake as well if you're using it on another GM 3800.

[@daymianhayes2493]

Can you show us how to install on a 4.0 or 4.7?

[@gilbertsantiago2921]

Hey exelent videos and info !! Question !! Can I use one of those supercharge in my v6?3.6? Canyon thanks hope u can help me with this topic

[@crandallwoodworking2988]

Our Pick-a-Part is dirt/mud. Wish they would at least pave SOME parts of it.

[@martinbuilt]

Yeah that the way Becker's Auto Salvage and others were in Iowa. Now none of the salvage yards around Cedar Rapids Iowa will no longer let you go out in the yard.

[@christianhutt1022]

I’m trying to supercharger my 98’ v6 Firebird and I have the supercharger but not the lower intake is that the piece that was under the supercharger that I need to replace with?

[@jesserenfro]

Are you planning on putting them on your 4.7 if so please let me know how your going to go about that I have a 04 overland with 102,129 miles and I want to add more power

[@subielife0743]

Love the video man, very helpful. I’m curious though if I would be able to install this M90 supercharger in my 2001 dodge Dakota 4.7L? And if so, what could I need? Thanks👍🏼

[@hardwire666too]

Also if you're the souring type you can buy them in peices and rebuild it yourself. It's one of those things I'm always searching for on ebay weather I need it or not. Haven't looked in a long time, since I havn;t had money for parts. But they used to show up as just the housiing or just the snout all the time, and rebuild kits aren't typically all that expensive. Theres also a few variations besides the m90 that people look for. Like the M62. I still wanna throw one on my 4.0 just for fun. But shes long in the tooth and needs a bit of love before I'd do anything like that. Nothign, just all the regualr stuff that goes bad after 25 years.

[@Kolonol1]

So they make an adapter kit to adapt this to the 4.7 on a ram. Why will this not work on any other 4.7? Is it clearance issues with the hood? Because that can be fixed

[@Sup_Evox]

That’s crazy I found 2 might go Friday it’s 100 a supercharger here

[@guadalupemonarrez8909]

animo sige adelante las cosas se dan con el tiempo saludos ati y toda tu familia mandale un saludo ami esposa maria de jesus desde sinaloa mexico

[@djdale.5806]

Same engine we run in our Australian Holden Commodores 89-2003.

[@josemunguia7250]

Great video.

[@tedz74]

But can you get it to fit on a 4.7L? :)

[@lukeellsworth1377]

Yes yes you can air ram makes an adapter I believe

[@brownwrench]

I came across one of those blowers at a swap meet and contemplated it for my 3.9 Magnum

[@martinbuilt]

That would be a perfect fit for the 3.9

[@lukeellsworth1377]

Does anyone know where I can get all the parts to mount the supercharger I know air ram sells the intake adapter for the Ford 4.6 but I don't know where to get anything past that and the supercharger

[@kurtboudreauxjr7688]

How much are you selling them for?

[@johnfeather5405]

Wish my PullApart was that clean.

[@martinbuilt]

Yeah, they do a great job at the Henderson Nevada Pic-a-Part the North Las Vegas Pic-a-Part not quite as clean. I guess the guys down in Henderson work a little harder. One of my favorite things about the Pic-a-Part is that they have all the cars elevated so you can get underneath them easily, and it's all on concrete.

[@johnfeather5405]

@@martinbuilt Mine is in Charlotte . It has large gravel that’s in unleveled, but they too are elevated. Concrete would be great.

[@martinbuilt]

@@johnfeather5405 It's been 10 years ago when they poured the concrete. Before the cars were on gravel and only the main alleyways were paved.

[@dreece2000]

Just Wish we just had a pull apart it can be nasty but it would be nice idk how they keep that so organized

[@357RedG]

Nice find. I wish the 4.7 had more mods. I'm looking into costs to swap mine for a 6.1 or 6.4 into my 07 Aspen.

[@martinbuilt]

Even a 5.7 would be a nice jump in power as well. Unless it already has a Hemi

[@357RedG]

@@martinbuilt yes it would but if the engine is out for a swap, might as well go 6 point anything

[@martinbuilt]

@@357RedG sure why not. 😎👍

[@trevorstacy3099]

Is there a piston and rod combo to lower compression on a 08’ 4.7 to be able to add boost? Also will the stock electronics register boost and adjust air/fuel?

[@martinbuilt]

How about the 9.0:1 short block from a 2003+ Dodge or 05+ Jeep. Electronics register?

[@stephenprice9635]

So will I be able to do this to my second gen Durango? I see some company’s use this and modify it to work for the Jeeps and Rams. I’m really excited to boost my daily to help with fuel economy some while on 33’s.

[@martinbuilt]

I don't know why they only listed for the 2002-2007 Dodge Ram. There may be some clearance issues with a super charger in trying to install it into a Dakota or Durango. The best would be to contact them. www.boostedtech.com/solutions/dodge-ram/dodge-ram-1500/2000-2007-dodge-ram-4-7-liter-v8-supercharger/

[@stephenprice9635]

@@martinbuilt thank you!!! I have been incorporating a lot of your videos into my Durango with some slight differences since it’s not entirely the same

[@bkin3086]

Hey Martin is there a kit to convert the super charger to 4.0 Jeep

[@martinbuilt]

Yes, there is with this same Eaton M90: www.boostedtech.com/solutions/jeep-cherokee/jeep-cherokee-xj-87-01/cherokee-4-0-liter-6-cylinder-top-mount-supercharger/

[@gennarohock1572]

Will this for on a 302 Ford

[@martinbuilt]

Yes, it can be and has been done before.👍

[@therealtexx03]

Will it fin on a 3.4 sfi?

[@martinbuilt]

It all depends on your skills set and determination, but I imagine you can make it fit on any engine.

[@jat-justamaturetech-philpj8285]

Hi Martin. I've got a thumping on my right rear wheel on my 2000' jeep grand Cherokee Laredo. I had a mechanic replace the wheel bearing but he said I need to replace the whole housing, which is the whole rear end cause it's worn out of round and will cost $2000? Someone else told me I can fix it using a certain method, I forgot what they called it? But at a fraction of the replacement cost. Do you have any advice??? Thank's

[@martinbuilt]

Are you talking about a suspension part that is worn out of round or the axle it self? If it was me, I would be going to a salvage yard and pull another complete axle. You should be able to pick one up for $200 or less.

[@jat-justamaturetech-philpj8285]

@@martinbuilt No, it's the Axel housing. The whole outer tube that houses the Axels and differental gears. The rear end. The bearing housing is out of round.

[@jat-justamaturetech-philpj8285]

@@martinbuilt . What shop can do this kinda work???speciality shop??

[@jat-justamaturetech-philpj8285]

@@martinbuilt . What specific year's would be compatible?? 👍

[@JaredGti07]

I have a Nissan pathfinder supercharger I got for 30 bucks at the junk yard haven't used it yet wanted to put it on my 3.7 dakota

[@martinbuilt]

Yes those look very similar to the M90. That would work well for the 3.7

[@JaredGti07]

@@martinbuilt I was sure how to do it no one's done a 3.7 I guess make a custom adapter plate and I'm worried about blowing it up

[@martinbuilt]

@@JaredGti07 Yes a custom adapter plate/intake manifold would need to be built. Custom tuning would also be needed.

[@1970dlw]

Is air Ram still in business?

[@martinbuilt]

I just checked their website. it's still up, and running it is different than it used to be.

[@lukeellsworth1377]

It's 60 bucks or so where I'm at in totally going to grab one soon

[@martinbuilt]

If you grab one let us know what you paid out the door.

[@greenbassboosts8872]

​@@martinbuiltbought 2 gen 3s and 1 gen 5 paid $160.50 out the door. $50 EA +tax complete superchargers no tb some have the relief valve some don't etc

[@gregj.gotham4402]

Oh please tell me your going to make up a manifold on your 4.7 HO and try a supercharger ?

[@martinbuilt]

Yeah I've been putting some thoughts into how I would build the intake manifold.

[@gregj.gotham4402]

Ya got a friend with a plastic printer things maybe they can plastic print ya up a design for a manifold.

[@martinbuilt]

@@gregj.gotham4402 That must be very large 3D printer. I would like to see the manifold that boosted technologies. But I think I know how it looks or at least how I would build it.

[@rp17rionda]

Can i Buy one? M90 by GM! .. 100$ shiitake to new york😊

[@saulgoodman9193]

Does anyone know if these Eaton superchargers will fit a 99-04 3.8l mustang?

[@SmokeyRam]

Ford made a supercharged version of the 3.8, look up the thunderbird supercoupe and mercury cougar XR7

[@saulgoodman9193]

@@SmokeyRam Thanks , looks like I need the M112 Eaton Supercharger for my mustang .

[@r.deanmcknight136]

Cool, too bad it wasn't 1 that would fit the 4.7.... that would be sweet 😋 👍

[@martinbuilt]

airram.com does sell an adapter that is made to fit the super charger that came from the Mustang Cobra 5.0

[@r.deanmcknight136]

@@martinbuilt yeah I just checked into that out of curiosity. I forgot at time I was last on that site they were in process of trying to make it work but I lost track of keeping up with that due to other chaotic happenings lol would be awesome to see a build involving that

[@trampolinesurfboard3009]

A GT500 blower would be perfect on a WJ with a 4.7

[@martinbuilt]

Yeah airram.com makes the adapters for that super charger to work on the 4.7

[@Kolonol1]

What year gt500?

[@Ihscout1069]

They make a kit for 4.7 rams that use that supercharger costs 4-5k

[@martinbuilt]

What I don't get is why wouldn't that same kit work on a Jeep Grand Cherokee? Is there a problem with clearance with the cowl?

[@Supercharged287SOHC]

@@martinbuilt most likely

[@Kolonol1]

Yeah I believe that kit comes with the supercharger though....I need to make a phone call and see if I can get a kit without the supercharger itself

[@Trollet456]

Put it on a chevy 454

[@martinbuilt]

On that large of an engine, you would need at least 2 to get any real boost.

[@JF32304]

First rule in government spending.

[@martinbuilt]

Lol...that's right.😀My favorite line in that movie.

[@JF32304]

@@martinbuilt SR Hadden. Hadden industries.

[@martinbuilt]

@@JF32304 You got it. 😃👍

[@siliconvalleyengineer5875]

I checked all your video's and you never did follow up and install one of those Eaton's on sbf or sbc, thats the problen with alot of you so called builders, no real builds just trash talk and wing flapping.

[@prestonboling1427]

i can't believe you did this just for clout. i'm not mad i'm just disappointed