Cleaning and Building a Match Set of Fuel Injectors

[@solomonmukugeta8572]

Martin you are really wonderful professional and also you are a great guy really you know how to use those machines you are doctor injector I learned quite a few from take you for your cooperation

[@martinbuilt]

Thank you. I really appreciate that. I'm glad you liked it and found it helpful.

[@majidbarzegari5021]

Good job ❤

[@Jeremy-fe7bf]

Can this machine do diesel injectors?

[@davestewart9146]

Great demonstration, thanks Martin 👍😁

[@martinbuilt]

Thank you. I'm glad you liked it 👍

[@ChrisFreeMan8]

Always enjoy your videos buddy!

[@martinbuilt]

Thank you, I'm glad you liked it 👍 😊

[@iangrange2485]

What cleaning agent are you using in the ultra sonic bath?

[@martinbuilt]

This is the stuff that I like the best. www.ebay.com/itm/Ultrasonic-Fuel-Injector-Cleaning-Solution-5-gal-Perfect-for-Launch-machines-/312062365285?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0 But this is what I was running at the time of the video video I had waited well over a month before I got it. amzn.to/3E5C4nt And it seems to be currently unavailable.

[@danhambrick6331]

Nice job Martin.You looked like you weren't feeling very well in this video.I hope all is well my friend. 🤞👍👍

[@martinbuilt]

Thank you. Really...I am doing great.😎👍

[@left_at_vickers6905]

Great content! Where do you get your o-rings and baskets at for the green band injectors? I have a set I need them for.

[@tatertots-n-soup]

I was wondering the same thing

[@dawsonjorgensen3521]

Hi Martin, I have a autool brand cleaning bench, I was wondering what rail pressure you recommend for testing the injectors at, and how many CC's should they be within eachother, and should low medium and high speed tests show the same flow results?

[@kittyhunter79]

What injectors do you recommend for the 3.7 in the jeep liberty for best performance and fuel mileage ?

[@tatertots-n-soup]

Hi. Great video. Informative and throu. I have a question..... have you ever tried water and dawn dish soap in the ultrasonic?

[@martinbuilt]

Thank you. I haven't tried that.

[@1Billme]

I sure wish I had found you earlier

[@justinallabaugh4162]

Love your videos I'm building a 4.7 for my ram 40 over 10.1 compression I found a set of 206 cams I hade my local machine shop port and polish the heads ordered a 70mm throttle body and I got a solid set of lash adjusters trying to figure out injectors size currently have any suggestions for me keep up the good work

[@martinbuilt]

I like the Denso 12582704 Where did you ever find the 206 cams?

[@comeoll]

@@martinbuilt What fluid do you use for the Injector Calibrator?

[@JohnSmith-ot9sc]

Great video martin, have you thought about offering an injector cleaning service? I have about 100 injectors lying around my garage, I grab them every time I'm at the scrapyard

[@martinbuilt]

Thank you, John, maybe sometime in the future I will. With that many injectors, you should get the same ultrasonic cleaner that I have.

[@JohnSmith-ot9sc]

@@martinbuilt Autool 6 injector cleaner right? I've been eyeing it the last couple months. I normally take mine to a diesel shop down the road but I can't watch the actual cleaning process. I'll probably get one I notice you have a few of the Autool branded items and have good things to say

[@martinbuilt]

@@JohnSmith-ot9sc I was thinking if you at least got the Professional Ultrasonic Cleaner amzn.to/3E12aZ2 that would help you out a lot and it also can be used for car parts as well. Yes, I feel that Autool makes some great products and would be comfortable with their Tester/Cleaner. Fuel Injector Cleaner and Tester amzn.to/3KwEi1Q

[@tatertots-n-soup]

@John what state are you in?

[@JohnSmith-ot9sc]

@@tatertots-n-soup North Carolina

[@gorenas_garage]

Good stuff

[@tatertots-n-soup]

What size is your ultrasonic?

[@martinbuilt]

Professional Ultrasonic Cleaner amzn.to/3E12aZ2

[@Motor-City_Ben-Diesel]

Has anyone tried TRQ fuel injectors?

[@brianknight4595]

Hi Martin I am from the UK but also property in Arkansas your injector calibration machine does your machine allow on the vehicle calibration ?? my question is when doing them off the vehicle Versus ON the vehicle DO YOU FIND OFF IS BETTER OR NO DIFFERENCE ? Cheers Martin ! Please come bank soon although I know you are busy with you new property cheers BRIAN

[@martinbuilt]

Thanks Brian yeah I'll be back at it as soon as I can. I personally don't know if on the vehicle is better than off I would think you're gonna get better results taking the injector off the vehicle and calibrating/clean them.

[@LevQWERTY]

Judging by the multiple experience of washing fuel injectors in ultrasonic baths, they usually stop holding pressure after this procedure if there was a lot of wear. Therefore, I would not advise people, especially those who have old nozzles, to clean them in an ultrasonic bath.

[@tonydowd8566]

I recently bought a set of 12 hole rebuilt Bosch injectors for my 2001 4.0 jeep grand Cherokee. Did I waste my $$$

[@martinbuilt]

No those are great injectors for the 4.0

[@tatertots-n-soup]

Fuel that isnt atomised is wasted. The more an injector vaporizes the fuel into the air. The more efficent it will operate. Gaining mpg or hp or both depending on your tune. It is a total waste of money if you cant super tune the engine. You could of got less from(edit: for) less money and wound up with the same output if you dont dyno or time trial the tune. But A+ for potential.

[@tatertots-n-soup]

In a stock motor you could see a increase in mpg and throttle response. But the dummy computer isnt going to know it can advance the timing further than its programing. And i would assume it could manage the air/fuel ratio still. Unless you have some monster racepump and the regulator cant keep the pressure in limits. But you surely would have a tuneable management system before you had a pump and reg like that.