EBC Blue Stuff my brutal opinion after 18 months on a road and track | 4K

[@bumspanka0927]

I bought EBC yellow stuff and took my Audi A6 to the track. They literally MELTED after 6 laps. Super dangerous! I went back to Brembo, 10x better

[@MDrives]

I think many pads would struggle in A6 on a track as it’s quite heavy car.

[@fen1xpro]

Clio 4 Trophy with 4 pots and 345mm rotor , upgraded from street brembo pad to EBC blue NDX, did the bed in procedure, gone on track and cooked the rotors in 2 laps. I'll never purchase EBC again. The street brembo pads were more reliable. Every time brakes get hot they now produce lot of vibration. It doesn't happen when brake are cold or warm so I don't think the disks are warped. Some spots apper darker on the disks.

[@MDrives]

I had that too. Agree, I’m going endless next.

[@fen1xpro]

@@MDrives i think track pads are too aggressive on the rotors. I feel more confident to return to a good street pad. Maybe Brembo or Ferodo.

[@captainprice665]

Really nice video as always! I can really recomend the Ferodo ds1.11, they squeal sometimes but not to bad honestly. It doesn’t bother me at all. The stopping power is amazing, both on track and in street use

[@MDrives]

Are they road legal or track only?

[@captainprice665]

@@MDrives they are track use only! Don’t know how you guys have it in UK but in Sweden it doesn’t matter at all

[@jakjak258]

same here.. bluestuff on a tts with zimmerman coat z rotors.. vibrations after 5min downhill.. i was about to change discs i thought they were the problem but actually the pads

[@MDrives]

I agree. I think they have a tendency to gather on discs if you don’t brake hard often.

[@censorshipBS]

No dust = discs being eaten. Ive ran ds2500's on a few cars and they tend to warp stock discs

[@MDrives]

On track or road?

[@coenwag]

I have Endless MX87 on my M140i, its the holygrail :)

[@MDrives]

Thanks. I think that’s going to be my next choice.

[@coenwag]

100% go for it :). They don’t squeal, dust is low and easy removal. Pedal bite & modulation is good. Temperature range is amazing 50-750c. Only downside is the price 400 euro for the fronts, but you get what you pay for :).

[@vollcare4076]

Have you also tried the other holy grail MX72plus and ME22 ?

[@ScottPC]

I had EBC yellow stuff for 10k miles on my M140i. Worst pads of my life!!!! The pads constantly left deposits causing HUGE vibrations under breaking, pulsating brake pedal, awful squeal and so so dirty wheels. HATE EBC. - Not sure why so many people love them to be honest!

[@MDrives]

Thanks for that feedback. I think majority of people don’t rate them very well.