Another great video AND the using of denatured alcohol to remove the tape. That’s a new one for me. Keep up the great work!
@AsWoodTurns2 жыл бұрын
Tank you Jim Alan
@williamellis89932 жыл бұрын
Really nice, Alan. If your wife likes it, you're ahead of the game. Stay safe. Bill
@AsWoodTurns2 жыл бұрын
She liked the second one. :) Alan
@scottleech56982 жыл бұрын
Great job, like your upgrades to the dyi jig, have to give it a try
@AsWoodTurns2 жыл бұрын
Another upgrade coming -- mount with expansion to a chuck instead of a faceplate. More options for rotation. Alan
@rogerdirkx.1679 Жыл бұрын
I really enjoy your videos. They’re very informative and interesting. I like your home made jigs. Thank you.
@AsWoodTurns Жыл бұрын
Glad you like them! You are welcome. Alan
@alanmullock3812 жыл бұрын
Thanks Alan,another new project for me to butcher!😁👍👍👍👍👍👍👍👍👍👍😎😎😎
@AsWoodTurns2 жыл бұрын
Have fun! No butchering required. Alan
@perleybowen77942 жыл бұрын
I like your idea of the alcohol to loosen the tape. Thanks
@AsWoodTurns2 жыл бұрын
It works great. You're welcome Alan
@tomcoker98822 жыл бұрын
Hi Alan, Looking forward to more on the chucks. It made doing your nice medallion a lot easier. Cheers, Tom
@AsWoodTurns2 жыл бұрын
More to come! Alan
@glencrandall70512 жыл бұрын
Very nice piece of work. 👍Thank you for sharing. Have a great day and stay safe.
@AsWoodTurns2 жыл бұрын
Thanks, you too! Glen Alan
@markfishburn82842 жыл бұрын
Another good idea and I like how the pendant came out. Thank you for sharing your video.
@AsWoodTurns2 жыл бұрын
You are welcome. Alan
@jackthompson50922 жыл бұрын
Great idea Alan.
@AsWoodTurns2 жыл бұрын
Glad you like it Jack Alan
@kenvasko22852 жыл бұрын
Thanks. Appreciate the full face shield comment.
@AsWoodTurns2 жыл бұрын
Always! Alan
@LarryDMitchell2 жыл бұрын
For my medallions I've used hot glue as well and as you mentioned it can get messy. I love your idea about using an additional screw mount, faceplate to register the piece and denatured alcohol to soften the tape. I'm going to try that soon. Thanks
@AsWoodTurns2 жыл бұрын
Yes, I got tried of trying to clean up after hot melt. After learning that DNA softens tape. I will stick to double stick tape (for these) Alan
@hfbowerndesigns8102 жыл бұрын
Great project and a chnace to look at your creatuive chucks and holders. I would like to do offset work, I will have to make some. Thanks for the ideas Alan Take care and stay safe and well Cheers Harold
@AsWoodTurns2 жыл бұрын
Please do! Makes it go much better. Alan
@woodturningjohn2 жыл бұрын
Cool stuff, I think I need to hit the shop and make some of those turning jigs.
@AsWoodTurns2 жыл бұрын
Go for it. Alan
@waynenickoleff90412 жыл бұрын
Hi Alan, Fairley new turner, new viewer and a new subscriber to your channel! This video has come at a perfect time, I’ve been asked if I could make a ring box, this jig fits the bill perfectly. I managed to find the article by David Mueller and am in the process of making this jig, I would like to know more about the modifications that you made, they make the jig even more versatile. Thanks again for taking the time to share your techniques, tips and tricks, they sure help us newbies out. Looking forward to your next video :-) Wayne
@AsWoodTurns2 жыл бұрын
Watch again this week. Alan
@linofernandez89084 сағат бұрын
Por favor, indíqueme el vídeo del accesorio para los descentrados.Gracias
@danceswithaardvarks32842 жыл бұрын
Really like the pendants and would like to try making some. The jig is great, but would probably cause too much vibration for my non-fixed lathe setup. Maybe mounting the workpiece to a plate that slides off centre (and can be locked in position) might also work and put a lot less weight off centre? Also really like that you are making a system rather than random jigs. A video on this would be tremendous if you haven't already made one. Thanks
@yvesmazny84932 жыл бұрын
Hello, the jig used is based on the sorby chuck and your proposal is usef by the Jean François Escoulen chuck. Only the last one uses conter weights if needed. Sorry for my English but this is not my maternal language. Regards.
@danceswithaardvarks32842 жыл бұрын
@@yvesmazny8493 Thank you : )
@AsWoodTurns2 жыл бұрын
vibration is minimal if you stay near original axis but much more the more the axis is shifted. Try putting a small disk on a faceplate and see how much there is. Also check at different speeds to find a sweet spot. If you can figure out counter weights, that could also be an option. Alan
@danceswithaardvarks32842 жыл бұрын
@@AsWoodTurns Thanks for your answer. Counterweight driven by wooden sprockets is ticking away in the back of my mind, but it will be a couple of weeks till I can get to it.
@bernardmaitre37332 жыл бұрын
bonjour Alan tres beau bijou avec un beau mandrin .C'est possible d'avoir le plan pour le faire ? merci pour la video a bientot bernard
@AsWoodTurns2 жыл бұрын
Je ne peux pas. The article is copyrighted by AAW. Try going to the AAW site. Alan
@bernardmaitre37332 жыл бұрын
@@AsWoodTurns merci bonne journée
@larryhill6187 Жыл бұрын
Please make a video on the chuck
@AsWoodTurns Жыл бұрын
The chuck was the subject of an AAW article that did a great job. Reference in the description. Alan
@masjabrikdiy84222 жыл бұрын
Good iike sir
@AsWoodTurns2 жыл бұрын
Thank you Alan
@monophoto12 жыл бұрын
"Pendant for a necklace' has potential gender bias implications. The same product could also be used as a zipper pull for sweaters (or turning smocks).
@AsWoodTurns2 жыл бұрын
Good idea. Sorry I could not fit them all in the title. :) Alan
@gbwildlifeuk82692 жыл бұрын
"Potential gender bias implications" FFS another woke wierdo! Isnt zipper pull for sweaters gender biased? Or are you implying because it's "necklace" it refers to female and to balance the bias, "sweater" swings it to male? Wrong on both counts! Both male and females wear necklaces and sweaters! Oxford Dictionary:- necklace an ornamental chain or string of beads, jewels, or links worn round the neck. No mention of by which gender! Find something else to make a limp complaint about. As long as you're moaning you'll be happy!