How to install a passive infra red motion sensor in a ceiling - PIR occupancy sensor

[@shaldonsrichund5708]

I love how you opened the PIR and showed the relay and explained the label at the back of the PIR. You always pull through with your amazing explanations!! You are great man!

[@ecologicaltime]

thank you

[@paulshaw3882]

I chuckled at your instruction to always make sure the power is off. No problem with that in SA!😂

[@mikedaylight5825]

Thanks for showing the 2nd PIR with the terminal block @10.20 got my job done ! thx

[@Bovorn.S]

Wow that really helped me understand how these things are wired up in relation to existing lights. I'm going to do my whole house! so I never have to touch a switch again!

[@smartcribs]

Half way into this video and I'm 100x impressed and satiated over and over avain

[@karsten600]

After watching some other videos without luck, your explanation took the cake! Thanks 👍😁

[@grrinc]

Thanks man. I'm fitting one of the smaller motion detectors tomorrow. This is a great overview.

[@reniervr6931]

Very very helpful! Busy with such installation...and this helped a lot! Well done!

[@TonyWheeler60]

Thank you. Your clear explanation and practical demsontration helped me instal a PIR sensor to an existing front door downlighter with ease :)

[@distorfilsgud9680]

for all South Park fans out there..Its just brilliant listening to my man there saying Here, I find myself repeating after him like Cartman..Hereee.... on topic, Great Video, explained right thanks dude

[@deg262]

Great explanation, many thanks. I've been looking for a clean and concise explanation of fitting my new PIR

[@divpatel518]

very nicely explained! very educational video.

[@yoh_rickie6267]

You have done it professionally 🔥 You have gained a new subscriber

[@drejam11]

Thanks that made things very clear. I was not sure where the the live connection for the light goes but you're diagram and video explained it

[@Grahammilsome]

Really clear and concise instructions. Thank you.

[@rizla2000]

Great video. Really helped explain and really comprehensive. Nice work 👍

[@rapidraga]

Life saver! Thank you!

[@jasonvictorian8598]

Excellent video. Thank you for this demonstration

[@popogo426]

You're video review is very helpful! Thank you for sharing this!

[@robhein]

Great video, easy to understand, on point, you show in detail how is all done -and it worked! Wifes happy im happy, thank you very much mate. Only thing that got me a bit was the order of the 3 screws on the back, somehow mine are in a different position, but it worked out. You have a great day.

[@rexrexford5249]

Terrific explanation....appreciate the wiring details. Very helpful.

[@alexbradley6398]

Really clearly explained, helped me a lot. Thank you!

[@chantaladepoju8575]

Thank you!! So clear and complete. Absolutely great info and transfer of knowledge.

[@53mayurpawar57]

Thank You Sir...Nice Connections...Electric Safety is very good...👌🏻👌🏻

[@ecologicaltime]

thank you

[@53mayurpawar57]

@@ecologicaltime Most Welcome 🙏🏻

[@engr.muhammadirfan8585]

Hello sir plz share the reliable infrared humen body motion sensor brand.

[@abdullolumideibrahim5287]

Well explained. Thank you

[@mogestesema343]

Thank you your video is very helpful.

[@andrewcollier7549]

Thanks you saved me with your information 🎉

[@MegaJackgarcia]

very good way of explaining things, thaks tou you I have founf a way/ thank you again

[@fentec1411]

Thank you for the knowledge!!!!

[@benchmarkengineeringservic4559]

Excellently explained wow.

[@phillipfa6]

Great Video!!

[@s4494r]

Thanks very detailed

[@rubbrg1134]

Thank you very much!

[@vaajkoo2805]

Can you wire two PIR's (placed at two different locations) onto one circuit to control the same set of lights?

[@ecologicaltime]

yes

[@eliezer3583]

Thank you

[@jebusgod5946]

Excellent help

[@protuskhaoya]

Well understood thanks

[@cosmikat2003]

Thaks, very useful

[@mariaeugenia.9128]

Excellent.

[@Stumantheuglydude]

Best 100%

[@tombarkers9841]

Life saver

[@grahamd5418]

Isn't the timer going to be a problem for having a bath or using the toilet? For the amount of time you need the lights to stay on would depend on wether you are using the loo or having bath. This is basing it on replacing a pull cord switch with the pir light. Or am I missing something here?

[@zenzen9131]

You can also wire the PIR sensor to be in parallel with the existing switch. In that case the switch works as normal for long baths etc etc and will put the light on automatically fr the set time when the light switch is selected off.

[@culturehorse]

Theres one in my bathroom. What's if FOR please?

[@africanhistory]

mine switches off and then switches back on immediately. Not sure what is triggering it in the bathroom. Maybe I bought the wrong one

[@sabuzhossain6340]

Hello Sir, Can I get the model number or manual of the small sensor of this video.

[@ramonarambula554]

🙏🙏🙏🙏🙏

[@mrjayeshnaik1717]

For a basic learner still not clear when you connected brown to PIR

[@mogestesema343]

How to know the motion sensor batteries when it is dead?

[@ismailmr6826]

😮😮

[@tazzy3469]

Explanation of 'how' is really useful but I have no idea why people are bigging up your electrical safety, it's an abortion 🤣

[@nathimngadi764]

💛💜❤️💚💙🇿🇦🏆

[@TomBartol]

51K views. 10% are dead because they watch this video.

[@bernardwarr4187]

Why do you think that?